Sealey SAG115
Cutting Discs271
 |
Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. More durable than aluminium oxide flap discs. Abrasive flaps are attached to rigid disc w more→ith epoxy adhesive - does not require backing pad. Depressed centre disc suitable for electric and air tools. Features and Benefits • Zirconium flap disc for descaling, derusting, weld preparation, weld cleaning and general surface preparation. • More durable than aluminium oxide flap discs. • Abrasive flaps attached to rigid disc with epoxy adhesive - does not require backing pad. • Depressed centre disc suitable for electric and air tools. • Size/Bore: Ø115/22mm. • Model No. FD11580 Specificatio&he
 |
Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 115mm • Bore: 22.23mm • Segment Height: 7mm • Pack Quantity: 1
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
Cuts materials that angle grinders previously couldn’t - Professionals value angle grinders for their ability to cut tough materials like concrete, stone and metal. With the EXPERT Carbide Multi Wheel more→this wonderful tool can be even more versatile, efficiently cutting all kinds of softer materials such as wood, plastic and modern composites. The EXPERT Carbide Multi Wheel uses sharp carbide grits on its rim to cut multiple materials extremely effectively. The grits are joined to a steel body by a laser technique for an extra strong bond, giving a safe and reliable cutting disc that maintains a constant speed and depth throughout a long lifespan. With the EXPERT Carbide Multi Wheel, your angle gr…
 |
Reliable Performance in Inox - The X-LOCK Standard for Inox Cutting Disc delivers reliable performance in Inox. Its thin disc edge supports smooth and easy cutting. In addition, the disc is free from more→ferrous, sulphurous and chlorinated fillers. Bosch cutting discs comply with the maximum safety requirements, such as EN 12413. X-LOCK cutting discs also fit standard angle grinders. Changing cutting discs is fast and convenient thanks to the keyless X-LOCK system. Click it on with X-LOCK – the fastest accessory-chang
 |
These premium-quality resin-bonded aluminium oxide flap discs provide durability and fast results. The strong X-weight polyester-cotto
Wire & Cup Brushes208
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Crimped Wire End Brush 25mm 6mm Shank WBS25E
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBS25E Wire End Brush has the following specifications: Type: Flat End. Face Diameter: 25 mm. Shaft: 6 mm (1/4 inch). Wire: 0.3 mm crimped steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £16.95
Compare prices3→Compare prices and buy Lessmann 0.5 Steel Wire Knot Cup Brush 65mm M10 x 1.25 Thread LES482213
Knot Cup Brushes are for heavy-duty use for the preparing of metal surfaces before painting, and the removal of slag, rust, scale or concrete waste.Lessmann knotted brushes are filled with a special s more→teel wire of high tensile strength in order to meet the demands of this type of brush. Products marked with a * have a bridle fitted which an be removed to expose a further 20mm of useable wire.This Lessmann Knot Cup Brush has the following specification: Diameter: 65mmThread: M10 x 1.25Wire Gauge. 0.50Wire Type. SteelMax. R.P.M. 12,500Additiona
 |
Price from £15.00
Compare prices5→Compare prices and buy Bosch X Lock Crimped Wire Wheel 115mm X-Lock 2608620732
Extra-Fine Surface Finish - The X-LOCK Clean for Metal Wire Wheel provides an extra-fine surface finish. It is fitted with crimped wire for light-to-medium
 |
Price from £13.00 up to £16.95
Compare prices6→Compare prices and buy Bosch Professional X-lock Clean Inox 75x0.30x125 Mm Brush Cup 2608620728
Extra-fine finish on stainless steel - The Clean for Inox cup brush with crimped wire X-LOCK offers an extra-fine surface finish.The cup brush with crimped wire for light and medium cleaning applicati more→ons is suitable for cleaning jobs, such as removing coatings and rust.It is suitable for use with X-LOCK grinders.Changi
 |
Price from £6.49 up to £10.99
Compare prices4→Compare prices and buy Faithfull Wire Cup Brush 80 X M14 X2 0,30Mm FAIWBC80
Crimped Wire Cup Brush for lighter to medium-duty applications such as cleaning metal surfaces prior to painting. Designed for use with a compatible thread angle grinder. Suitable for industrial use a more→nd more specialist applications. Features: For cleaning metal surfaces prior to painting M14 thread mount M14 thread mount Specifications: Dimensions: H:11.5 x W:6.0 x D:9.0 cm Colour: Red Guarantee:5 years Material: Metal Model Number: FAIWBC80
 |
Price from £6.49 up to £7.29
Compare prices5→Compare prices and buy Sealey Flat Wire Brush Stainless Steel 100mm with 6mm Shaft
• Flat wire brush.• Crimped stainless steel filaments.• Shaft: ø6mm.• Diameter: ø100mm.• Maximum Speed: 4500rpm.Flat wire brush with crimped stainless steel filaments, 100mm width and a 6mm more→shaft.• Flat wire brush. • Crimped stainless steel filaments. • Shaft: ø6mm. • Diameter: ø100mm. • Maximum Speed: 4500rpm. • Model No. SFBS100Technica
 |
Price from £6.78 up to £8.23
Compare prices6→Compare prices and buy Sealey Twist Knot Wire Cup Brush Ø65mm M10 x 1.25mm
• Suitable for use with power tools up to the maximum rated rpm.• Twisted steel filaments give more aggressive cleaning action - ideal for heavy rust removal.Suitabl
 |
Price from £2.10 up to £2.81
Compare prices6→Compare prices and buy Draper Flat Top Decarbonizing Wire Brush, 13mm
Brassed crimped steel wire brush with flat trim. 6mm diameter shanks. Brush length 25mm. Display packed.
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
