Sealey SG125EU
Cutting Discs163
 |
Up to 3x more precise than a standard ceramic diamond disc - The tiles used in modern construction are often large, very hard and expensive. Cutting them to a high standard every time is therefore cru more→cial yet difficult. The EXPERT HardCeramic Tile-Cutting Disc uses Diamond Technology and a range of design features to deliver the best results consistently, even in the hardest ceramics. Bosch Diamond Technology, which brings new diamonds to the surface to ensure the rim is always sharp, allows our ceramic cutting disc to cut smoothly through even hard tiles. The thin, strong body and continuous fluted rim offer maximum control and keep vibration low for a high quality, chip-free cut. The Bosch …
 |
Faithfull Abrasive Jumbo Flap Discs contain up to 40% more abrasive than standard flap discs, providing a considerably longer working life. Manufactured from long lasting Zirconia Alumina. Resin bonde more→d for extra strength and durability. Designed for use with most angle grinders of the corresponding size. Ideal for use on wood, metal, plastic and stainless steel.Diam Size 127mmGrade Medium 60 GritBore 22.23mm Additional Information:&bu
 |
CorePlus Top Twelve General Purpose Cutting Blades provide low cost cutting in a wide variety of building materials. The blades, with premium graded quality diamond segments, and a tensioned high grad more→e steel core, were manufactured to EN 13236 quality standards. Suitable for cutting; concrete, concrete lintels, reinforced concrete lintels, hard sandstone, concrete pipes, concrete paving slabs, bricks, block paving slabs, concrete kerbs, clay pipes, hard slate, roofing tiles, quarry tiles, etc. Specification: Segment Height: 12mm.1 x CorePlus Top Twelve General Purpose Diamond Blade 125mm.Additiona
 |
Milwaukee Drywall / Plasterboard Reciprocating Saw Blades. Precision forming process creates sharper teeth for fast cutting. Bi-metal teeth for greater durability and has a plunge tip for fast and eff more→ortless plunging. Suitable for special applications such as drywall and plasterboard. Specifications • Blade Length: 125mm • Teeth per Inch: 6 • Plunge Cut: Yes • Pack Quantity: 5 Features and Benefits • Precision forming process creates sharper teeth for fast cutting • Bi-metal teeth for greater durability • Plunge tip for fast and effortless plunging • Suitable for special applications such as drywall and plasterboard
 |
Reliable Cuts in Concrete - The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality sta more→ndards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards …
 |
DeWalt's Laser welded Diamond Cutting Disc is manufactured using advanced bond technology which increases blade productivity and operating life. The blade has a layer of pre-alloyed metal which enclos more→es the diamond creating a pellet that is held more securely and distributed better within the segment. Specifications • Diameter: 125mm • Bore: 22.2mm • Thickness: 2mm • Performance: Extreme • Applications: Cutting Features and Benefits • Pre-alloyed metal layer • Laser welded segments • High quality, low carbon steel core • For use with corded and cordless angle grinders
 |
Makita's Diamak Diamond Cutting Discs with segmented rim. The segmented blade is designed to cut most masonry materials including Masonry, brick, block, light concrete, sandstone, limestone and slate. more→Specifications • Diameter: 125mm • Bore: 22.23mm • Ring: 20mm • Pack Quantity: 1
 |
Fast and Powerful Cutting - The X-LOCK Expert for Metal Cutting Disc provides powerful cutting performance in metal with maximum safety. The disc is made of premium aluminium oxide with advanced pheno more→l resin, which copes with demanding applications while delivering good results. Moreover, the disc's precision-manuf
Wire & Cup Brushes214
 |
Price from £13.95
Compare prices3→Compare prices and buy Lessmann 0.3 Steel Wire Cup Brush 40mm 6mm Shank LES434162
The Lessmann Cup Brush is fitted with 6mm shank and is ideal for working on medium to large areas. They are generally used for the removal of rust, paint, dirt or scale, and for polishing.Diame
 |
Price from £2.95
Compare prices3→Compare prices and buy Faithfull Point End Crimped Wire Brush 12mm 6mm Shank WBSI12P
This Faithfull Wire End Brush is suitable for cleaning paint or deburring moulds or castings in hard-to-reach areas such as cylinders. The brush has crimped steel wire and is designed for light to med more→ium-duty applications. Suitable for use in industrial power tools at higher speeds. The FAIWBSI12P Wire End Brush has the following specifications: Type: Pointed end. Face diameter: 12/60 mm x 20 mm. Shaft: 6 mm (1/4in). Wire: 0.3 mm steel. Conforms to ISO 9001. and DIN EN1083-1 and 2.Additional Information:&bu
 |
Price from £12.19 up to £13.95
Compare prices5→Compare prices and buy Draper Brassed Steel Crimped Wire Brush Set (6 Piece)
• Set includes a 25mm wire end brush, 75mm wire cup brush, and three wire wheel brushes (50, 75, 100mm) • Designed for light to medium-duty work and delivers rapid stock removal from a wide variety of more→surfaces • Hardened dipped brassed steel wire • Strong construction with crimping action • Suitable for cleaning, deburring and surface preparation • Fitted with a non-slip 6.35mm hex shank • Compatible with most drill drivers and drills with a 13mm chuckThis set of wire brushes is designed for light to medium-duty work and delivers rapid stock removal from a wide variety of surfaces. The brushes are made from hardened dipped brassed steel wire, which gives a high level of durability and resistance&hell
 |
Price from £7.95 up to £11.99
Compare prices5→Compare prices and buy Faithfull Wire Cup Brush T/Knot 65Xm10X1,25 0,5Mm FAIWBT65MF
Twist Knot Wire Cup Brush for heavier duty applications such as the removal of slag, rust, scale or even dried concrete. Designed for use with a compatible thread angle grinder. Suitable for industria more→l use and more specialist applications. Features: For heavier duty applications For use with angle grinders For use with angle grinders Specifications: Dimensions: H:11.5 x W:5.7 x D:9.0 cm Colour: Multi Guarantee:5 years Material: Metal Model Number: FAIWBT65MF
 |
Price from £3.16 up to £4.22
Compare prices6→Compare prices and buy Draper Wire Cup Brush, 40mm
Brassed crimped steel wire with 6mm diameter shank. Display packed.
 |
Price from £3.49 up to £3.68
Compare prices4→Compare prices and buy Sealey Flat Top Brassed Decarbonising Brush 24mm 6mm Shank VS1803
Flat trimmed brush with brassed and crimped filaments for extra rigidity. Ø6 x 26mm Shaft. Features and Benefits • Flat trimmed brush with brassed and crimped filaments for extra rigidity. • Ø6 x 26m more→m Shaft. • Trim Length/Diameter
 |
Price from £10.19 up to £13.95
Compare prices5→Compare prices and buy Bosch 0.3mm Crimped Brass Coated Wire Cup Brush 70mm M14 Thread 1608614020
Extra-Fine Finish - The Clean for Metal Wire Cup Brush delivers an extra-fine surface finish. The wire cup brush is fitted with brass-coated crimped wire for light- to medium-duty cleaning application more→s. It is suitable for removing coatings, rust and paint stripping on medium to large metal and non-ferrous metal surfaces. This wire cup brush is also suitable for roughing, matt sanding, cleaning formwork boards and facings. It is intended for use with angle grinders. The brass-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster …
 |
Price from £6.49
Compare prices4→Compare prices and buy Bosch 0.2mm Crimped Inox Steel Wire Pencil Brush 15mm 6mm Shank 2608622126
Fine Finish on Stainless Steel - The End Brush provides a good fine surface finish. It is fitted with crimped wire for light- to medium-duty cleaning applications on small surfaces. Due to its shape, more→the end brush is ideal for cleaning work in very hard-to-reach areas on stainless steel, aluminium and non-ferrous metal surfaces as well as in corners and the inside of pipes and profiles. It is also suitable for removing rust, roughing, matt sanding and paint stripping. It is intended for use with drills with a 6-mm shank. Brush wires are available in different thicknesses for variable levels of abrasive needs. Thicker wires are more aggressive, producing a coarser yet faster surface finish, while …
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
