Triton MOF 001 (tr205456)
Diamond Core Bits & Milling Cutters581
 |
1/4 Groove 12.7mm x 90° TCT Router BitPTDDRPDIR75336"
 |
A bearing guided, tungsten carbide tipped cutter designed to produce a decorative edge when working on MDF, softwoods, hardwoods and plywood. Shank: 1/4in. Features: Produces a decorative edge TCT cut more→ting edges TCT cutting edges Bearing guided Specifications: Dimensions: H:15.0 x W:1.5 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB91
 |
Trend Craft Pro 1/4in shank straight router cutter - 15mm diameter Two Flute Carbide tips Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber bas more→ed materials. 19mm deep cutting tips with bottom cut feature for general purpose slotting and shallow mortice work. 16mm cut ideal for wide, shallow rebating and for general joinery and furniture work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications • Shank Diameter: 1/4 • Dia Metric: 16 • Dia Imperial: 5/8 • …
 |
Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 69
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 8 • Dia Metric: 8 • Dia Imperial: 5/16 • Cut Length Metric: 19 • Overall Length Metric: 57
 |
This Tungsten Carbide tipped cutter is similar to an ovolo cutter and provides a rounded profile along the edge of the material.It differs from ovolo cutters by producing a single step only. Shank: 1/ more→4in. Features: Produces a stepped rounded profile along the edge of the material TCT cutting edges TCT cutting edges Guide pin enables the cutter to follow intricate shapes Differs to Ovolo cutter by producing a single step only Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB41
 |
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications • Cut Length Metric: 7.14 • Cut Length Imperial: 9/32 • Bearing Dia Metric: 22.2 • Bearing Dia Imperial: 7/8 • Sawbore: 9.5 • Sawbore Imperial: 3/8
 |
Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 11.1 • Cut Length Imperial: 7/16 • Overall Length Metric: 58.5
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
