Virutex FR217S
Diamond Core Bits & Milling Cutters798
 |
Clarkson 01PM/03PM standard series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 2.0mm - 20.0mm: Four Flutes Sizes 21.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eig more→ht Flutes BS 122/4. Specifications • Milling Diameter: 17mm • Shank Diameter: 16mm • Length of Cut: 32mm • Overall Length: 80mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectiona
 |
Tungsten carbide cutting edges, suitable for DIY and professional use. Supplied with 2 bearings (9.5 & 12.7mm) to enable use as either ovolo or rounding over bits. The guide bearing can follow complex more→and intricate shapes and the cutters are suitable for use on softwoods, hardwoods, MDF and plywood. Shank: 1/4in. Features: With two bearings (9.5 and 12.7mm) to enable use as Ovolo or rounding over bit TCT TCT Specifications: Dimensions: H:12.0 x W:2.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB112
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 16 • Overall Length Metric: 59
 |
These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cu more→t can be changed by purchasing alternative bearing sizes. Easy to set-up and use. Hex key is supplied. N.B. The grooving section of this tool cannot be detached from the shank. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 10 • Cut Length Imperial: 25/64 • Overall Length Metric: 68.5 • Bearing Dia Metric: 12.7 • Rebate Metric: 10
 |
The Halls High Speed Steel Countersink with 1/4in hexagon shank 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 20.5mm.Angle. 90° .PTDHLLXCM20
 |
Trend Snappy 12.7mm diameter TCT countersink - with adjustable drill 12.7mm diameter countersink with clearance drill designed for Metric screws up to 6mm diameter shank. The perfect, fast swap acc more→essory for clean, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 5mm diameter replaceable HSS (High Speed Steel) drill Ideal for clearance holes in metric screws up to 6mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …
 |
Trend Self-Guided 90° Bearing Guided Trimmer for trimming plastic or plywood overlays. Also for copy profiling with a template. Raise cutter in stages to spread wear of cutting edges. Made from TC more→T.This Trend TCT 90° Bearing Guided Trimmer Cutter has the following specifcation: Cut Diameter: 12.7mmCutting Depth: 25.4mmShank: 1/4inPTDTREC116
 |
31.33Buy!
£
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/50 x 1/4 TCT Two Flute Cutter has the following specification: D: 9.5mm (3/8in)C: 25mmOL: 58mmShank Diameter: 1/4inPTDTRE3501
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
