Virutex RV70U (7000810)
Diamond Core Bits & Milling Cutters1342
 |
Up-cut helical gives long lasting super fine finish. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 19 • Cut Length Imperial: more→3/4 • Overall Length Metric: 59 • Type or Grade: Up-cut
 |
The Trend Two Flute Straight Cutters produce a cleaner finish than the single flute cutters. Suitable for grooving rebating morticing drilling and shallow lateral routing cuts such as recessing hin more→ges. Corners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard MDF plywood hardwoods and hard plastics.This Trend 3/80 x 1/4 TCT Two Flute Cutter has the following specification: D: 12.7mm (1/2in)C: 19mmOL: 64mmShank Diameter: 1/4inPTDTRE3801
 |
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 8 mm • Dia Metric: more→2 • Dia Imperial: 5/64 • Cut Length Metric: 5 • Overall Length Metric: 50
 |
39.95Buy!
£
£
Tooled-up.com
Delivery: to United Kingdom
Report
A set of 4 popular sizes of Dormer G136 HSS countersinks supplied in a plastic case. Specifications G1366.3 • Diameter: 6.3mm • Length: 45mm • Shank Diameter: 5mm G13610.4 • Diamet more→er: 10.4mm • Length: 50mm • Shank Diameter: 6mm G13616.5 • Diameter: 16.5mm • Length: 60mm • Shank Diameter: 10mm G13620.5 • Diameter: 20.5mm • Length: 63mm • Shank Diameter: 10mm Features and Benefits • Tool Material: HSS • Surface Treatment: Bright • Standard: DIN 335 C • Direction of Cut: Right • Application: Countersink • Type of shank: Straight • Countersink Angle: 90° Contents • 1 x G1366.3 • 1 x G13610.4&hellip
 |
Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Has a shorter cutter length for use on thin boards. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 4 • Overall Length Metric: 60 • Bearing Dia Metric: 12.7
 |
Trend Snappy 12.7mm diameter TCT countersink - with adjustable drill 12.7mm diameter countersink with clearance drill designed for Metric screws up to 6mm diameter shank. The perfect, fast swap acc more→essory for clean, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 5mm diameter replaceable HSS (High Speed Steel) drill Ideal for clearance holes in metric screws up to 6mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …
 |
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications • Shank Diameter: 1/4 • Dia Metric: 5 • Dia Imperial: 13/64 • Cut Length Metric: 16 • Overall Length Metric: 71
 |
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softw more→ood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks, for quick identification. Produces a smooth round over profile, or an ovolo mould with quirks. Includes extra bearing B127A for round over effect. Specifications • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Overall Length Metric: 62 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 6.3
Important!
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
Compatibility with specific models Routers & Trimmers should be confirmed with the online store manager directly before purchase.
