Yato YT-82207
Cutting Discs97
 |
Features:Carbid
 |
The Extreme Runtime series of accessories have been designed primarily to give maximum performance with DeWalt Flexvolt power tools. These reciprocating saw blades are constructed with M42 HSS steel a more→nd have a tough coat outer later for reducing heat and friction, delivering enhanced performance and longer lifetime. Features & Benefits • Extreme Runtime Accessories optimised for Flexvolt Power Tools • Increased Efficiency for maximum Cordless Run Time • Full Tooth HSS • M42 HSS (+8% Cobalt) • 2X Life versus standard blades • Additional runtime / cuts per charge with Flexvolt battery & tool • Variable Tooth Design (increased Blade Efficiency, reduces tooth …
 |
Reliable Cuts in Concrete - The Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete. Its optimised diamond matrix delivers solid results thanks to the disc's high-quality sta more→ndards. Bosch's diamond competence centre in Switzerland ensures these standards by enabling consistent quality time and again. Use this disc for cutting concrete. It is compatible with angle grinders. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Reliable Cuts in Concrete • Standard for Concrete Diamond Cutting Disc provides reliable cuts in concrete • Optimised diamond matrix delivers solid results thanks to the disc's high-quality standards …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough material - The sheer abrasiveness of cement fibre board means it is one of the toughest materials for your recip saw blade. For installers, plumbe more→rs, electricians and any tradesmen involved in maintenance and restoration, however, cutting these boards is essential. The EXPERT ‘Fiber Plaster’ is designed to cut fibre plaster boards effectively over a long lifetime. Its extreme durability comes courtesy of Bosch Carbide Technology, integrating the hardest metal into an advanced tooth design. The relatively short, pointed blade gives good control and access to tight spaces: it is designed with productivity in mind. The Bosch EXPERT ‘Fiber Plaste…
 |
IRWIN® Bi-Metal Sabre Saw Blades cut all metals, including non ferrous, pipe conduit, stainless and sheet metal. Superior construction and design make them faster cutting and longer lasting. Label more→ling on the blade makes it easy to identify the right blade for the right application. Suitable for use with materials 1.5 to 10mm (1/16 to 3/8in) thick, dependent on the TPI of the blade.Pack of 5 IRWIN® 618R Metal Cutting Sabre Saw Blades 150mm 18 TPI.Additional Information:&bu
 |
Milwaukee Heavy Duty TORCH Demolition Reciprocating Saw Blade. Strong and Robust 1.06 mm thick body. Shatter resistant bi-metal blade body will bend and flex but not break. Thick 1.06 mm robust torch more→blade body for precise cuts in sheet metal and pipes. 25 mm blade height for improved stability and minimum vibration. Specifications • Blade Length: 150mm • Teeth per Inch: 14 • Max. Cutting Capacity (Inox): 3-7mm • Max. Cutting Capacity (Metal Pipe): 10-100mm • Max. Cutting Capacity (Non Ferrous Metals): 3-10mm • Max. Cutting Capacity (Steel): 3-10mm • Pack Quantity: 5 Features and Benefits • Robust 1.06 mm thick body • Shatter resistant bi-metal blade …
 |
Lasts up to 50x longer than a Bi-Metal blade in tough materials - Cutting out windows for replacement or during demolition was a tough job when it involved sawing multiple window materials such as ste more→el-reinforced wood or plastic. Since window fixing screws started using high-tensile engineering steel, the old Bi-Metal blades don’t get through a single screw. The Bosch EXPERT ‘Window Demolition’ Reciprocating Saw Blade is a window demolition blade for the modern era. Backed by Bosch Carbide Technology, its teeth tear through the toughest, strongest fixing screws – and survive to do it again. The short length, tapered tip and side set carbide teeth are all designed with the specific task in mind:…
 |
This blade is suitable for use with corded and cordless sabre saws (including compact sabre saws). The S 967 XHM Endurance for Wood and Metal Demolition Recip Saw Blade performs in even the toughest a more→pplications, especially high-strength steel embedded in wood. It has extra-long life due to carbide technology that ensures effective cutting in even the strongest materials. The saw blade's new wide shoulder design provides ultimate support for its carbide teeth, allowing it to withstand extreme abuse. Furthermore, its large 5-7 teeth per inch (TPI) tooth design is optimal for demolition in wood with metal. S 967 XHM Carbide Technology, side set, ground Wood with embedded (hardened) nails/metal …
Abrasive Wheels & Belts3608
 |
Fine Grit Sanding (P60 and Finer) - The Backing Pad M14 Soft is ideal for fine grit sanding (P60 and finer). Its flat surface is optimised for fine sanding applications. A heavy-duty pad design makes more→it durable and provides an extended pad lifetime. Manufactured from thermostable plastic, it resists high temperatures and breakage. It is suitable for use with angle grinders with M14 spindle. With 22.23 mm bore for standard locking nut angle grinders. Features and Benefits • Ideal for Fine Grit Sanding (P60 and Finer) • Backing Pad M14 Soft is ideal for fine grit sanding (P60 and finer) • Flat surface is optimised for fine sanding applications Specifications Diameter: 180mm Max.…
 |
Excellent Lifetime - The X-LOCK X571 Best for Metal Flap Disc offers an excellent lifetime on metal applications. Its high-quality zirconia alumina/semi-fr
 |
14.62Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Abrasive Sleeve / Grit 40 / Sanding Form Round
 |
10.22Buy!
£
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Sandpaper / Grit 100 / Quantity 5 Piece / Sanding Form Round / Disc Diameter 150 mm
 |
Excellent Lifetime - The X571 Best for Metal has an excellent lifetime when grinding welding seams and coarse sanding metal surfaces. Its high-quality zirconia alumina/semi-fr
Important!
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
Compatibility with specific Grinders & Polishers models should be checked with manager of online store immediately before purchase.
