Elbow & Knee Pads SAS-TEC

3D protector made of viscoelastic soft foam with very good impact absorption values: residual force under 20 kN. Due to its flat design, it is hardly noticeable and is ideally suited for close-fitting textile clothing. We recommend using this protector in the shoulder, elbow and knee areas. High-end technology for even more safety. Article: SCL-2 Delivery: in pairs Weight: approx. 59 gr. / piece Dimensions (L/W/H): approx. 200/150/11 mm Protection level: 2 (average residual force under 20 kN) Protection area: shoulders/elbows/knees - S type B, E/K type A Symmetrical Features Protectors undercut the prescribed standard EN 1621-1:2012, level 2 Protectors are not destroyed by the impact, so they …

3D protector made of viscoelastic soft foam with very good impact absorption values: residual force under 20 kN. Due to its flat design, it is hardly noticeable and is ideally suited for close-fitting textile clothing. We recommend using this protector in the shoulder, elbow and knee areas. High-end technology for even more safety. Article: SCL-1 Delivery: in pairs Weight: approx. 69 gr. / piece Dimensions (L/W/H): approx. 240/150/11 mm Protection level: 2 (average residual force under 20 kN) Protection area: shoulders/elbows/knees S/E/K type B Features Protectors undercut the prescribed standard EN 1621-1:2012, level 2 Protectors are not destroyed by the impact, so they can still be used Protectors …

3D-Protector from visco elastic soft foam with outstanding shock absorption values: Residual force < 14 kN (Norm, level 2: 20 kN). Optimal for breathable textile clothing due to the ventilation openings. Protectors are recommended for use in elbow and knee areas. Larger sizes are also certified for use in the shoulder area. High-end engineering for greater safety. Article: SC-1/05 Weight: ca. 75 g / item Dimensions (L/W/H): ca. 270/180/13 mm Protection level: 2 (mean value below 20 kN) Protection area: E/K Type B Symmetrical Features Protectors surpass the required values of EN 1621-1:2012, level 2 by approx. 30 per cent Protectors are not destroyed by an impact and can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent) sold in pairs…

3D-Protector from visco elastic soft foam with outstanding shock absorption values: Residual force < 12 kN (Norm, level 2: 20 kN). Protectors are recommended for use in knee and elbow areas in high quality clothes. High-end engineering for greater safety. Article: SC-1/06 Weight: ca. 120 g / item Dimensions (L/W/H): ca. 360/250/14 mm Protection level: 2 (mean value below 20 kN) Protection area: E/K Type B Symmetrical Features Protectors surpass the required values of EN 1621-1:2012, level 2 by approx. 40 per cent Protectors are not destroyed by an impact and can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent) sold in pairs…

3D Protector from visco elastic soft foam with outstanding shock absorption values: Residual force < 20 kN. Optimal for breathable textile clothing due to the ventilation openings. Protectors recommended for use in elbow and knee areas. Also certified for use in the shoulder area. High-end engineering for greater safety. Article: SC-1/02 Weight: ca. 72 g / item Dimensions (L/W/H): ca. 250/160/11 mm Protection level: 2 (mean value below 20 kN) Protection area: S/E/K Type B Symmetrical Features Protectors surpass the required values of EN 1621-1:2012, level 2 Protectors are not destroyed by an impact and can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent) sold in pairs…

3D-Protector from visco elastic soft foam with outstanding shock absorption values: Residual force < 15 kN (Norm, level 2: 20 kN). Optimal for breathable textile clothing due to the ventilation openings. Protectors recommended for use in elbow and knee areas. Also certified for use in the shoulder area. High-end engineering for greater safety. Article: SC-1/42 Weight: ca. 73 g / item Dimensions (L/W/H): ca. 250/180/13 mm Protection level: 2 (mean value below 20 kN) Protection area: S/E/K Type B Symmetrical Features Protectors surpass the required values of EN 1621-1:2012 by approx. 25 per cent Protectors are not destroyed by an impact and can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent) sold in pairs…

3D-Protector from visco elastic soft foam with outstanding shock absorption values: Residual force < 21 kN (Norm: 35 kN). Optimal for breathable textile clothing due to the ventilation openings. Barely noticeable and not bulky. High-end engineering for greater safety. Article: SC-1/07 Weight: ca. 45 g / item Dimensions (L/W/H): ca. 200/140/10 mm Protection level: 1 (mean value below 35 kN) Protection area: H Type B Symmetrical Features Protectors surpass the required values of EN 1621-1:2012,level 1 by approx. 30 to 40 per cent Protectors are not destroyed by an impact and can still be used Protectors are lightweight Protectors are washable (remove, hand launder separately / water absorption less than one per cent) sold in pairs…