Ethernet Cables Cisco

UC PHONE 7800 SERIES

Specifications:General:- Type of network cables: patch cord- Length: 3 mConnectivity:- connector: RJ-45 - male- Connector (second end): RJ-45 - maleCompatibility Information:- Designed to: Cisco Webex Room Kit,Room Kit Plus,Room Kit Plus - GPL,Room Kit Plus - MSRP,Room Kit Unit

FeaturesConnector 1SFP+Connector 2SFP+Cable length5 mProduct colourGreyConnector 2 genderMaleConnector 1 genderMaleInfiniBand protocolYesTechnical detailsConnector 1SFP+Connector 2SFP+Cable length5 mWeight & dimensionsCable length5 m

ETHERNET

The Cisco 10G Direct Attach Twinax SFP+ Cable is an efficient and cost-effective solution for connectivity within racks and across adjacent racks. This passive twinax copper cable assembly features SFP+ connectors on each end offering a variety of 10-Gigabit Ethernet connectivity options for data centres enterprise server rooms and service provider transport applications.

The Cisco 10G Direct Attach Twinax SFP+ Cable is an efficient and cost-effective solution for connectivity within racks and across adjacent racks. This passive twinax copper cable assembly features SFP+ connectors on each end offering a variety of 10-Gigabit Ethernet connectivity options for data centres enterprise server rooms and service provider transport applications.

Technical detailsFiber mode structureMulti-modeConnector 1LCConnector 2LCCable length2 mFeaturesFiber mode structureMulti-modeConnector 1LCConnector 2LCCable length2 mHarmonized System (HS) code85447000Product colourOrangeConnector 2 genderMaleConnector 1 genderMaleWeight & dimensionsCable length2 mLogistics dataHarmonized System (HS) code85447000

Cisco Sfp+ Copper Twinax (Figure 2) Direct-Attach Cables Are Suitable For Very Short Distances And Offer A Cost-Effective Way To Connect Within Racks And Across Adjacent Racks. Cisco Offers Passive Twinax Cables In Lengths Of 1 1.5 2 2.5 3 And 5 Meters And Active Twinax Cables In Lengths Of 7 And 10 Meters.

SFP+ Direct Attach Cables can be used instead of transceivers for distances up to 8.5 meters.

The Cisco StackPower cables are thick but flexible and they carry power as well as a data signal to provide a communications channel among the switches in the power stack.

StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.

A StackPower cable has colors bands on the cable ends green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.

An XPS cable has a color band on the cable …

SPARE FOR C300L

SPARE FOR C9300L

FeaturesConnector genderMale/MaleConnector 1SFP28Connector 2SFP28Cable length2 mData transfer rate25 Gbit/sInfiniBand protocolYesHarmonized System (HS) code85444290Technical detailsConnector 1SFP28Connector 2SFP28Cable length2 mData transmissionData transfer rate25 Gbit/sWeight & dimensionsCable length2 mLogistics dataHarmonized System (HS) code85444290

High-performance stacking cable used to daisy-chain switches to each other.

The Cisco 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor.

The Cisco 10G Direct Attach Twinax SFP+ Cable is an efficient and cost-effective solution for connectivity within racks and across adjacent racks. This passive twinax copper cable assembly features SFP+ connectors on each end offering a variety of 10-Gigabit Ethernet connectivity options for data centres enterprise server rooms and service provider transport applications.

With Sfp+ Modules 3 Meter In

Cisco QSFP to QSFP copper direct-attach 100GBASE-CR4 cables are suitable for very short links and offer a cost-effective way to establish a 100-Gigabit link between QSFP-100G ports of Cisco switches within racks and across adjacent racks.

Cisco StackWise-480 technology is built on the highly successful industry-leading StackWise technology which is a premium stacking architecture. StackWise-480 has a stack bandwidth of 480 Gbps. StackWise-480 uses Cisco IOS Software SSO for providing resiliency within the stack. The stack behaves as a single switching unit that is managed by an "active" switch elected by the member switches. The active switch automatically elects a standby switch within the stack. The active switch creates and updates all the switching/routing/wireless information and constantly synchronizes that information with the standby switch. If the active switch fails the standby switch assumes the role of the active …

The Cisco 25GBASE SFP28 (Small Form-Factor Pluggable) portfolio offers customers a wide variety of high-density and low-power 25 Gigabit Ethernet connectivity options for data center and high-performance computing networks applications. The 25G Modules are based on SFP28 form factor.

The Cisco StackPower cables are thick but flexible and they carry power as well as a data signal to provide a communications channel among the switches in the power stack.

StackPower and XPS cables are keyed and have colored bands on the ends to help you understand what cable plugs into what switch or XPS.

A StackPower cable has colors bands on the cable ends green on one end and yellow on the other end. This cable can be used between Catalyst 3750-X switches and an XPS. Note that the connector with the blue band can only connect into a Catalyst 3750-X switch while the connector with the yellow band can connect to a Catalyst 3750-X or an XPS.

An XPS cable has a color band on the cable …

Cisco StackWise-480 technology is built on the highly successful industry-leading StackWise technology which is a premium stacking architecture. StackWise-480 has a stack bandwidth of 480 Gbps. StackWise-480 uses Cisco IOS Software SSO for providing resiliency within the stack. The stack behaves as a single switching unit that is managed by an "active" switch elected by the member switches. The active switch automatically elects a standby switch within the stack. The active switch creates and updates all the switching/routing/wireless information and constantly synchronizes that information with the standby switch. If the active switch fails the standby switch assumes the role of the active …

FeaturesConnector 1QSFPConnector 2QSFPCable length1 mData transfer rate40 Gbit/sInfiniBand protocolYesHarmonized System (HS) code85444290Technical detailsConnector 1QSFPConnector 2QSFPCable length1 mData transmissionData transfer rate40 Gbit/sWeight & dimensionsCable length1 mLogistics dataHarmonized System (HS) code85444290

Sfp Cable 5M In