Printer Parts Creality

8.7 W/(m-K) Low Thermal ConductivityThermal conductivity is 8.7W/(m-K) (200C)half of the stainless steel material, effectively blocking heat dissipation. Thermal conductivity of copper: 386W/(m.k) efficiently dissipates the heat conducted by the hotend.1.012GPa High StrengthGood comprehensive mechanical properties, Tensile strength: 1.012GPa400°C High Thermal StrengthSupport long time work at 400 °C, and make 3D printing speeds fasterHighly PolishedRa Light WeightedThe density of titanium alloy: 4.5g/cm357% of stainless steel material

The 3010 blower fan is widely used in hotend cooling, 3D printing projects, and other FDM DIY machines, but the connector is not fit for the CR6 SE stock fan. High performance, low noise, and long working print life.

8.7 W/(m-K) Low Thermal ConductivityThermal conductivity is 8.7W/(m-K) (200C)half of the stainless steel material, effectively blocking heat dissipation. Thermal conductivity of copper: 386W/(m.k) efficiently dissipates the heat conducted by the hotend.1.012GPa High StrengthGood comprehensive mechanical properties, Tensile strength: 1.012GPa400°C High Thermal StrengthSupport long time work at 400 °C, and make 3D printing speeds fasterHighly PolishedRa Light WeightedThe density of titanium alloy: 4.5g/cm357% of stainless steel material

1. Compatible Models: This double-side texture PEI build plate is compatible with the K1/ K1 Max 3D printer.2. Premium Double-Side PEl Coating: With heat and wear-resistant, frosted PEl coating, the plate surface is not easily scratched or damaged.3. Double-Sided Printing, Cost-effective: The PEI Sheet has a double-sided PEI coating, and both sides can be used.4. Excellent flatness, easy model removal: The spring steel plate not only has high flatness but also good elasticity, it does not deform after repeated bending, and the printed model is easy to remove.5. Easy to Use: Dual handles and positioning hole design make it easier to install and use.

High-temperature printing under 300C, titanium alloy material can reduce the heat conduction upward.

High-temperature printing under 300C, titanium alloy can reduce the heat conduction upward, and chrome copper has better overall performance with the feature of speeding up heat dissipation.

HD Quality Video Creality K1 AI camera delivers HD quality video and real-time viewing possibilities of printing status through Creality Cloud or Creality Print.Enable AI Detection Before printing, if an unknown object is detected, the printer will be automatically paused to prevent collision with the hot end. During printing, if a printing failure is detected, the printer will be suspended automatically to reduce the waste of filaments.Time-lapse FilmingCreality K1 AI camera allows you to log into Creality Cloud to automatically create time-lapses for sharing.K1 AI CameraHD QualityAl DetectionTime-lapse FilmingEasy to installHD Quality True-to-Life VideoCreality K1 AI Camera supports

Double-Sided Textured / Smooth PEI Printing PlatformThis PEI plate has two different build surfaces to meet different printing needs. One side is PEI film with a smooth surface, and has a good effect on the model's bottom surface; The other side is the golden textured PEI that has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEI and can be switched freely.Durable and Long Lasting The build surface with PEI textured coating has strong adhesion to the printed model and cannot be scratched, worn, or warped easily.Easy Model RemovalThe spring steel plate not only has high flatness but also has good elasticity, it

Double-Sided Textured / Smooth PEI Printing PlatformThis PEI plate has two different build surfaces to meet different printing needs. One side is PEI film with a smooth surface, and has a good effect on the model's bottom surface; The other side is the black textured PEI that has high adhesion, and the model is not easy to warp. The double-sided build plate combines the advantages of the textured/smooth PEI and can be switched freely.Durable and Long Lasting The build surface with PEI textured coating has strong adhesion to the printed model and cannot be scratched, worn, or warped easily.Easy Model Removal The spring steel plate not only has high flatness but also has good elasticity, it

High Flow & 600mm/s High-speed Printing SupportPrinting at breakneck speeds up to 600mm/s is now a breeze, thanks to the expanded hot melt section, providing a 32% increase in length (28.5mm) for flawless high-speed printing.Copper Alloy + Hardened Steel Heat Break MaterialStainless steel with extremely thin wall thickness has excellent thermal insulation performance, while pure copper has excellent thermal conductivity, which can speed up heat conduction, so the overall performance is better.Compatible with Creality K1 SeriesThe Ceramic Heating Block Kit is tailor-made for seamless integration with Creality K1 Max, K1C, and K1 3D Printers, ensuring a perfect fit and exceptional

1. Compared to the B3950 thermistor, the PT1000 thermistor can provide faster heating speeds, resulting in faster printing.2. Planar contact heating elements have a more certain contact than ceramic heating ring contacts.3. Higher power heating element for a shorter warm-up time. More heating power is available when encountering high-temperature ranges and high flow conditions.4. Compared to the original one OTC hotend heating elements and thermistors are easy to maintain and replace.5. The material choice of thin-walled stainless steel tubes and titanium screws for the connection structure minimizes the conduction of heat from the heating block to the heatsink.6. It is compatible with the

1. Compared to the B3950 thermistor, the PT1000 thermistor can provide faster heating speeds, resulting in faster printing.2. Planar contact heating elements have a more certain contact than ceramic heating ring contacts.3. Higher power heating element for a shorter warm-up time. More heating power is available when encountering high-temperature ranges and high flow conditions.4. Compared to the original one OTC hotend heating elements and thermistors are easy to maintain and replace.5. The material choice of thin-walled stainless steel tubes and titanium screws for the connection structure minimizes the conduction of heat from the heating block to the heatsink.6. It is compatible with the

High-Temperature Resistance Up to 300 CelsiusThe heat break is made of titanium and copper alloys which support high-temperature printing at 300 Celsius and is compatible with more filaments. Also, the 0.2mm thin wall thickness for excellent thermal insulation.High Thermal ConductivityThe cylindrical ceramic heating ring improves heating efficiency and reduces heat loss. With uniform heating and fast heat transfer, it only takes 40 seconds to heat from room temperature to 200 Celsius.Support 400mm/s High-speed Printing The overall hot melt section is increased by 30%(The hot melt section length is 27.8mm), and the high-temperature heat-resistant insulation sheet is added to maintain the

Flexible Filament Printing Expert Titan extruder adopts a 3:1 gear ratio, with a 42-26 motor, it is lightweight, powerful, and precise.High Temperature and High Flow Hotend The hotend has an all-metal design, its high-temperature resistance is up to 300 Celsius, and supports a variety of filament printing: TPU, PLA, ABS, PETG, PC, PA, etc.High-Speed PrintingIt features a large melting zone and high flow extrusion, supporting 300mm/s high-speed printing. High-temperature heat-resistant insulation sheet is added to maintain the temperature of the melting zone.Simple Installation, Easy to Use You can easily upgrade and replace the motor and other components. The tensioning force is

Bluetooth Config NetworkThe WiFi Box can easily and quickly configure the network through Bluetooth connection, which is easy to operate and enhances the user's network configuration experience.Time-lapse Photography DesignEquipped with a time-lapse photography function, it captures the 3D printing of wonderful scenes that cannot be detected by the naked eye, and automatically backup to the cloud, so you can watch the time-lapse video online by Creality Cloud.Remote Control and Real-Time MonitoringCreality Smart Kit enables remote monitoring and real-time printing. You can control the printer work and check the printing status in real-time on Creality Cloud, which makes 3D printing

1. Planar contact heating elements have a more certain contact than ceramic heating ring contacts.2. Compared to the original OT hotend heating elements and thermistors are easy to maintain and replace.3. Separate design of fixed flange and heating core. The flange is made of a material with a low thermal conductivity to reduce the working temperature of the heat sink fixed with it by screws.4. Compatible with various MK8 series nozzles that are readily available.5. Can be installed on Creality CR-M4 or other Sprite extruder-equipped Creality printers.Compatibility:For Creality K1/K1 max CR-M4 it is a drop-in replacement.For other sprite extruder-equipped Creality printers, the overall

1. Planar contact heating elements have a more certain contact than ceramic heating ring contacts.2. Compared to the original OT hotend heating elements and thermistors are easy to maintain and replace.3. Separate design of fixed flange and heating core. The flange is made of a material with a low thermal conductivity to reduce the working temperature of the heat sink fixed with it by screws.4. Compatible with various MK8 series nozzles that are readily available.5. Drop-in replacement for the hotend of the Creality K1 /Creality K1 MAX 3D printer.Compatibility:For Creality K1/K1 max CR-M4 it is a drop-in replacement.For other sprite extruder-equipped Creality printers, the overall height may

Small sprite & Huge power54x50x64.3mm small size, 266g weight. Exquisite design, the perfect combination of extruder and printing hotend make more powerful functions.Large torque, Extrusion force up to 80NThe use of gear with a 3:5:1 gear ratio which perfectly matches with motor makes extrusion force up to8ON (depending on filaments). More precise control of feeding withdrawal.Dual gear feeding, More stable printingThe double-toothed structure does not damage filaments, feeding is more reliable and stable.Modular Product Solution Convenient and Quick ModificationThe Sprite Extruder, enables all the Ender-3 series 3D printers a direct extrusion and high-temperature printing

Small sprite & Huge power54x50x64.3mm small size, 266g weight. Exquisite design, the perfect combination of extruder and printing hotend make more powerful functions.Large torque, Extrusion force up to 80NThe use of gear with a 3:5:1 gear ratio which perfectly matches with motor makes extrusion force up to8ON (depending on filaments). More precise control of feeding withdrawal.Dual gear feeding, More stable printingThe double-toothed structure does not damage filaments, feeding is more reliable and stable.Adjustable tension, Professional and playableThe tensioner allows you to fine-tune the pressure exerted by the drive gears onto the filament according to your preferences which helps to

DIY MasterCompact and Lightweight3.5: 1 Gear RatioAll-metal Design