Crimpers & Strippers Miyako

Blade diameter (mm): 38 Hole diameter (mm):9 Application: For stainless steel pipes Mass (g):30

Compatible models: 151 Product name: Stop pin Compatible models: F/151/151CSST/65S

External dimensions: L200mm, weight: 150g Compatible tubes: polyurethane, PU, nylon, polyethylene, PE, PVC, Teflon, etc. *Not suitable for cutting PVC, electric wires and cables. Cutting capacity: up to φ1/8 -1-inch Function: Opening spring (with lock) Features: ① The blade fits in the middle of the guide, so the cutting surface can be cut neatly at right angles. ② Built-in opening spring improves work efficiency. ③The blade can be locked to prevent it from opening, allowing for safe storage. Cuts a wide range of tubes including polyurethane, nylon, polyethylene, PVC, and Teflon with an outer diameter of up to 25 mm. Since the blade is placed in the middle of the guide, the cutting surface can be …

Spare blade for EA580EC

Applicable pipe cutter: 609-803 Material: HSS

Compatible model: VSS-20

For stainless steel pipes Beaver 25 Astronic 1

A roller type pipe cutter that can cut stainless steel flexible pipes. It is a mechanism that cuts by holding a metal pipe between the rollers. Can accommodate pipes of a wide range of thicknesses. The cutting diameter is approximately 4-32mm. For DIY and more! It also has excellent durability. Cuttable diameter: Can cut metal pipes of approximately 4-32mm. A roller type pipe cutter that can cut stainless steel flexible pipes. It is a mechanism that cuts by holding a metal pipe between the rollers. Can accommodate pipes of a wide range of thicknesses. The cutting diameter is approximately 4-32mm. For DIY and more! It also has excellent durability. Cuttable diameter: Can cut metal pipes of approximately …

You can open and close the blade with one hand. The blade feed is a ratchet type, allowing you to cut finely with each squeeze. The blade part has a special shape (R shape) that has good bite and sharpness. Body weight: 45g Material: SUS-440 [Features] ●Replacement blade for TVP-34. ●You can open and close the blade with one hand. ●Replacement blades can be replaced separately. [Application] ●For cutting hard PVC pipes, polyethylene pipes, polybdenum pipes, etc. with an outer diameter of up to 34□. 【use】 ●Compatible model: TVP-34 ●Mass (g): 45 [Material/Finish] ●Special alloy steel [Set contents/accessories] ●Do not use the tool for any purpose other than its intended purpose. 【Note】 ●Do not use th…

●Compatible model: VC-0334A

For 307FP

Size: Diameter/22mm Weight: 10g Material: HSS Application: General use (copper, steel, stainless steel, brass, etc.)

Hard elbow tube shape: 16mm hard tube/acrylic tube bending tool set. ABS multi-angle acrylic elbow module suitable for AWGM3 series. There are 3 in each group to meet your needs. Suitable for 16mm hard pipe: The acrylic pipe bending tool set is suitable for 16mm hard pipe. 16mm support tube outer diameter, 16mm acrylic tube hot bending auxiliary angle positioning. THREE ANGLE ELBOWS: 16mm hard pipe arch shape has 3 types of curvature: 45/90/180. The set consists of elbow shapes with different angles: 45 degrees, 90 degrees and 180 degrees. High quality ABS material: High strength ABS material. The angle of the locating groove is precise and the shape is polished and mirror finished for optimal …

pipe cutter Tools for water and air conditioning piping 2016 Orange Book MCC Work Tools Page Published MCC work tools MCC Corporation Co., Ltd.

An essential item for making your own LAN cable. Cable stripping tool You can peel the outer skin of UTP/STP cables. Comes with a finger ring for smooth peeling work. Equipped with an optimal pressure adjustment device for clean peeling. [Compatible]: Diameter 4~7mm cable [Adjustment]: Comes with optimal pressure adjustment tool

Application: Cutting mild steel wire rod Maximum cutting capacity: 4.0mm Total length: 216mm Warning: Never cut live wires as there is a risk of electric shock. Caution: Do not use it to cut materials other than those specified. Cut with the blade perpendicular to the material being cut. Do not bend it back and forth or twist it from side to side. The blade may be chipped or bent. Be sure to cut from the center of the blade. If you cut with the tip of the blade, the blade may be damaged. Country of origin: Japan