Expensive carpenter Squares & Rulers

Four-piece Combination Square (hardened set). Includes machinist's blade, square/mitre head, protractor head & centre head. Features & Benefits • All blades fully hardened and tempered • Durable, easy to read satin chrome finish blades • High contrast, micro-fine blade graduations • Square/Mitre head features level vial and hardened scribe tool • NEW FEATURE - Reversible (Full-Body) protractor head with ALL hardened sets • Protractor scale graduated from 0-180 degrees in both directions • Heads supplied with a hammertone powder-coat finish Specifications • Part Number: 7127-012H • Length: 300mm • Protractor Style: Reversible • Blade Style: …

The Moore & Wright MW521-01 Combination Set is supplied with three measuring heads (square, protractor and centre) which can be attached to the stainless-steel ruler, allowing versatile measurements and marking on various types of workpieces.The stainless-steel rule has engraved graduations; one side metric, one side imperial with hardened and ground slide ways. Range: 180°.Length: 300mm (12in).Additional Information:• Type: Combination Set• Size: 300mm/12in

The Faithfull 7 Piece Carpenter's Tool Set is supplied in a padded carry bag. All seven tools are made to the highest quality from the finest hardwood, brass and steel. Supplied in a sturdy carrying and storage case. Carpenters 7 piece kit comprising of: 1 x No.4 Plane.1 x 601/2 Block Plane.1 x Spokeshave.1 x Try Square 225mm (9in).1 x Sliding Bevel 225mm (9in).1 x Marking Knife 175mm (7in).1 x Mortice & Marking Gauge 150mm (6in).Additional Information:• Type: Carpenters/ Woodworking Set• No. of Pieces: 7

The Faithfull Carpenter's Tool Kit has been specially commissioned to provide the essentials you need for working with wood. All the tools are made to the highest quality from the finest hardwood, brass and steel. The set includes: Traditional No.4 Smoothing Plane60.1/2 Block Plane230mm Try Square230mm Sliding BevelMortice and Marking Gauge They all come with the confidence of a 5-year guarantee. This is a super gift for the professional, enthusiast or apprentice. Presented in a hinged wooden case.Additional Information:• Type: Carpenters/ Woodworking Set• No. of Pieces: 5

The UNIVERSALANGLE from Bosch delivers fast and easy measurements, calculations, and transfers of angles. It features a practical sliding leg that extends up to 35 cm for measuring supplementary angles in hard-to-reach corners, making it the ideal tool for flooring installations and tiling. Integrated measuring functions help to conveniently calculate simple and compound mitres that facilitate precise compound saw adjustments to the required angles – perfect when installing skirting boards for example. For improved sustainability, the UNIVERSALANGLE is made using recycled materials and also comes in polybag-free cardboard packaging. Features & Benefits • Fast and easy measurement, calculation, a…

Designed for use with Festool's cutting systems, the SM-KS Angle bevel offers exceptional versatility and performance. Featuring a durable construction, it is built to withstand the demands of daily use in a woodworking workshop. Its high-quality materials and meticulous design guarantee longevity and reliability, making it a trusted companion. Equipped with clear and easy-to-read markings, this bevel enables quick and accurate angle adjustments. Compact and portable, this angle bevel is easy to carry and store, making it ideal for use on job sites or in cramped workshop spaces. Its ergonomic design ensures comfortable handling, allowing for extended periods of use without fatigue. Main Applications …

This Faithfull FAIPLANEKIT 4-piece kit is the ultimate Plane & Woodworking Set collectively made from the finest quality woods, steel and brass Containing:1 x No.4 Plane.1 x 230mm Sliding Bevel.1 x 230mm Try Square.1 x Marking Gauge. The No.4 Plane is designed for smoothing and final finishing. The sliding bevel and try square feature a machined hardwood stock, brass end plates and a blackened spring steel blade. The Faithfull FAIPLANEKIT comes with a 5-year guarantee and is supplied in a wooden presentation case. Additional Information:• Type: Carpenters/ Woodworking Set• No. of Pieces: 4

The Tajima Slant AL200 is a rotary angle meter which is designed to provide an easy way to measure the angles of slopes and inclines with one hand. It is equipped with a durable, lightweight aluminium frame and a magnet for affixing to metallic surfaces. To Measure an Angle or Pitch: 1. Place the bottom of the pitch / angle meter flush with the surface to be measured. 2. Rotate the thumb-screw knob until the bubble in the vial is centered between the alignment lines then read the angle or pitch calibration mark at the index pointer. 3. Invert the pitch / angle meter to measure a downward slope. To Set an Angle or Pitch: 1. Rotate the thumb screw knob until the index pointer is positioned at …

Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5, 45, 67.5 and 90). It also has an additional 21 angles marked on its scale. The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be switched between right and left position. Blade Length 1200mm (47.1/4in) Weight 1150g.

The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5, 45, 67.5, 90). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification Blade Length 900mm (35.1/2in).

Stanley 1-45-013 Folding Builder's Square is ideal for checking and chalking in shell construction, tiling and assembly of partitions. Measuring 1200 x 1200 mm, the Stanley 1-45-013 builders square is capable of marking angles of 45 and 90 in applications such as shell construction, tiling and assembly of partitions. It is lightweight yet solid and can be folded up easily for transportation. Features: Angles of 45 and 90 Easy to fold and store with hang hold Measuring 1200mm x 1200mm x 1720mm - 48" x 48" x 68" Solid, light aluminium square ideal for checking and chalking in shell construction, tiling and assembly of partitions Suspension hole for vertical storage Specification: Length (cm): …

The Sealey AK11000 Precision Steel Square Set has been hardened, tempered and precision polished  The Sealey AK11000 is a 4 piece set of Steel Precision Squares that have been hardened, tempered and precision polished. With a quality-made solid steel construction and blade edges and stock face to within ±0.016mm tolerance. Features:  
- Quality made solid steel construction 
- Hardened, tempered and precision polished 
- Blade edges and stock face to within ±0.016mm tolerance   Comes With:  
- Wooden case 
- Precision Squares:
- 50, 75, 100, 150mm  Specification: 
- Model No: AK11000 

Sliding T Square Note: Image is for illustrative purposes only and may differ from the actual product

The Trend DAF/8 Digital Angle Finder has a large LCD display with digital readout to allow easy reading of angles. It calculates angles from 0-220 and up to 360 when the locking knob is removed. Ideal for measuring internal and external angles quickly. The angle finder has a large aluminium stock for stability and accuracy and a robust yet lightweight aluminium construction butt. The 50mm wide blade with locking function has a dual metric/imperial scale and a 90 angle check on the end of the blade. The angle finder is easy to operate with 3 buttons - on/off, hold and zero/ABS. When used in ABS mode, the readout always reads correctly. In addition, it has a spirit level vial. Resolution 0.05/ …

Indispensable tool ideal for woodworking, construction and machining. An angle finder that doubles as a rule, designed to find both internal and external angles. The digital display is clear with easy calibration. Measuring range from 0 to 360 with Metric/Imperial rule which can be locked in any position.

Expert Quality, anodized finish with lockable adjustable blade for angle finding in various applications. LCD display with absolute and relative angle option. LCD readout reads 'right way' when turned through 180°. Accuracy 0.1°. Contents: 1 x Digital Angle Finder, 250mm

Made from solid laminate provides an instant means of squaring off, marking out, setting up jigs etc. Blade guiding edge bevelled for ease of use. Tapered blade.