Carpenter Squares & Rulers Hultafors

This Hultafors Try Square with fibreglass-reinforced ABS plastic stock and millimetre graduations on the upper and lower edges of the blade.The blade is made from stainless steel, measuring 1.0 x 45 mm, and has a fibreglass-framed ABS plastic stock, with an 18 mm wide working surface.The graduations are deep etched, and highly resistant to wear. Specification: Size: 200mm.Additional Information:• Size (mm): 200• Blade Material: Stainless Steel

This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser etched with very high contrast and abrasion resistance. The blade is 45mm wide to accommodate work with standard stud dimensions. Custom made riveting and a 1mm thick high-strength stainless steel blade increase durability, ideal for tough working environments. Made in Europe with full control over …

The Hultafors 52ME Combination Square can be used as an outside and inside try square, mitre square, depth and marking gauge. It has a stainless steel blade with ground edges, and ends marked in millimetres and inches. The lightweight zinc stock is matt black and is fitted with a scriber. Specification: Size: 300mm (12in)Additional Information:• Size (mm): 300• Blade Material: Stainless Steel

This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser etched with very high contrast and abrasion resistance. The blade is 45mm wide to accommodate work with standard stud dimensions. Custom made riveting and a 1mm thick high-strength stainless steel blade increase durability, ideal for tough working environments. Made in Europe with full control over …

This Hultafors Square has been developed to be both light and durable. Ideal for anyone who often carries a square in their pocket. There is also a hole for attaching the tool to a safety lanyard or for wall hanging. Its precision cut blade and riveting have very small tolerances to provide high precision; angle tolerance ±0.06° (±1 mm/m). The millimeter graduations have been laser etched with very high contrast and abrasion resistance. The blade is 45mm wide to accommodate work with standard stud dimensions. Custom made riveting and a 1mm thick high-strength stainless steel blade increase durability, ideal for tough working environments. Made in Europe with full control over …

The Hultafors Professional Try Square comes with a 1.5 x 45mm stainless steel blade, and has millimetre graduations on the upper and lower edges of the blade.Graduations are deeply etched and are highly resistant to wear. Its anodised aluminum stock features an 18mm wide milled working surface. Specifications:Length: 300mm (12in).Blade Size: 1.5 x 45mm.Tolerance: ±0.03 degrees.1 x Hultafors V 20 Professional Try Square 200mm (8in).Additional Information:• Size (mm): 200• Blade Material: Stainless Steel

This Hultafors Mitre Square automatically produces the correct angle when cutting mitres without having to perform any calculations. When the tool is turned to the desired angle, the indicator flag divides the angle by two. The guide is made from fibreglass-reinforced nylon, with an indicator flag of electrogalvanized metal, and can be used for both internal, and external angles. SIze 150mm.

The Hultafors HULSMV20 Bevel Square with stainless steel blade and aluminium stock has milled working surfaces, for the copying and transfer of angles to work pieces.The square has a screw for a locking blade at the end of the stock for improved accessibility.Specification: Size: 200mm.Additional Information:• Blade Length (mm): 200• Handle Type: Aluminium• Blade Material: Stainless Steel

The Hultrafors Quattro Adjustable Try Square has a millimetre scale which can be set at three positions (45°, 90° and 135°) and has a tolerance ± 0.06°. It can also be folded making it easy to store and carry.The stock is made of anodised aluminium, the blade is 25cm long x 45mm wide and made of stainless steel, with the scale being deep-etched and extremely hard-wearing. Specification: Size: 250mm. Additional Information:• Size (mm): 250• Blade Material: Stainless Steel

The Hultafors Quattro 270 Adjustable Square has a blade which can be rotated to 45°, 90° and 135°. It can also be rotated 270° allowing you to use the opposite side of the stock where there is no slit that, for example, thin sheet metal parts can slide into. In addition, there are markings for 22.5°, 67.5° and 75°/15°. If you rotate the blade 270° you get a rounded corner instead so you can work in uneven corners. The stock is made of fully anodized aluminum with a 19mm thick handle. Its high strength stainless steel blade is 45mm wide and 1mm thick. This accommodates work with standard stud dimensions and a center line makes it easy to quickly mark out both …

Suitable for measuring angles or transferring angles from a point of measurement to a work-piece. Made of anodised aluminium for improved durability against corrosion. Alpha x read on the left side of the scale, Beta x on the right and can also be used to read angles between 20° and 160°.Additional Information:• Square Type: Folding Square• Size (mm): 300

The Hultafors Adjustable Plasterer's Square has millimetre and degree graduations that can be set in 4 fixed positions (22.5, 45, 67.5, 90). There is an additional 21 angles marked on the scale. The stock and blade are made from anodized aluminium. They can be folded together, making it easy to store and transport, and also be switched between right and left position. Specification Blade Length 900mm (35.1/2in).

Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5°, 45°, 67.5° and 90°). It also has an additional 21 angles marked on its scale. The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be switched between right and left position. Blade Length: 1200mm (47.1/4in)Weight: 1150g.Additional Information:• Size (mm): 1200• Blade Material: Aluminium

The Hultafors DPL Digital Pocket Level is smart and compact. It combines the functions of a spirit level, an inclinometer and a protractor in one device. The auto-rotating, backlit display and v-grooved magnetic base allows for use in many environments. Display measure values are switchable between °, %, mm/m and in/ft.Combine it with our Hultafors Measures app, via bluetooth, to show the full potential of this small spirit level. Supplied with a belt pouch for protection and transportation. Tolerance of 0.05° at 0° and 90°, 0.2° between 1° and 89°.Additional Information:• Length (cm): 8• No. Vials: 0