Chains & Reciprocating Saw Blades

For cutting out damaged tile joints. Also for cutting slots in plaster, porous concrete and similar building materials and for cleaning and reworking deck joints. Not suited to very hard epoxy resin or cement joints. The cost-effective alternative to diamond tools.Segmented, ideal for working in corners and on edges without overcutting. Cutting width approx. 2.2 mm.Specifications:- Ø: 75 mm- Mount: SL

Specifications • Pitch: 3/8" • Chain Type 1: 099 • Chain Type 2: E • Gauge: 0.058 • Overall Length: 450mm/18" Features and Benefits • Makita saw chain 45cm/18" 68 D links • Mowers & outdoor power tools - accessories • Quality Makita accessories for power tools and garden tools

Fast Rip and Crosscuts - The Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood. Its high-quality precision-ground carbide teeth make the blade robust enough for rapid cutting while its base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy. Furthermore, the blade´s expansion slots lower vibration during use, which dampens noise and reduces heat development. Use this saw blade in all types of wood and wooden materials. It is compatible with hand-held and table saws. Speedline Wood Circular Saw Blade delivers fast rip and crosscuts in all types of wood Bore works with or without reduction rings to fit different sizes. Features a…

Bosch 2608900564 Expert T341HM 'Fiber Plaster' Jigsaw Blades - Long Life Cutting Abrasive Construction Materials The Bosch 2608900564 is a 3 Pack of T341HM Blades suited to cutting glass fibre reinforced plastics (5-50 mm), plasterboard, fibre cement boards (

Circular Saw Blade PrecisionFeatures:- Carbide Teeth For Precision And Durability.- Alternate Top Bevel (Atb) Tooth Geometry For Fine Cuts.- Expansion Slots For Low Vibration As Well As Noise And Heat Reduction.- Fits Standard Circular Saws From Most Brands.Specifications:- Blade Diameter Mm: 250- Bore Mm / Bore With Reduction Ring: 30- Cutting Width Mm: 3.2- Number Of Teeth: 48

The DeWalt Extreme Runtime series of accessories were designed primarily to deliver maximum efficiency when used in conjunction with Flexvolt cordless power tools. These blades are suitable for cutting wood, including wood with nails imbedded in it. Features & Benefits • Extreme Runtime Accessories optimised for FLEXVOLT Power Tools • Increased Efficiency for maximum Cordless Run Time • Full Tooth HSS • M42 HSS (+8% Cobalt) • 2X Life versus standard blades • Additional runtime / cuts per charge with Flexvolt battery & tool • Variable Tooth Design (increased Blade Efficiency, reduces tooth breakage) • Tough Coat reduces friction and heat build up for longer …

Features:Powerful Cuts In A Wide Range Of Materials:- Multi Material Circular Saw Blade delivers powerful cuts in a wide range of materials- Base blade made of dimensionally stable SK5 hardened steel (> 40 HRC) ensures accuracy- Expansion slots lower vibration during use, which dampens noise and reduces heat development- HLTCG (High-Low Triple Chip Ground) teeth make the blade robust for working with abrasive materials- The HLTCG (High-Low Triple Chip Ground) teeth make the Multi Material Circular Saw Blade robust for working with abrasive materials.- It is compatible with hand-held saws.Specifications:- Outer diameter mm: 150- Bore size mm: 20- Bore with reduction ring mm: 16- Width of cut (…

Maximum Battery Runtime - The Standard for Steel Circular Saw Blade maximises the cordless saw's battery runtime. Its extra-thin kerf reduces friction and material removal, consuming less power for effortlessly smooth sawing. High-quality carbide teeth support clean and precise results. It is suitable for cutting steel. The blade fits all common cordless handheld dry-cutters. The Standard for Steel Circular Saw Blade enables clean and precise results thanks to its high-quality carbide teeth. Bore works with or without reduction rings to fit different sizes. Features and Benefits • For Maximum Battery Runtime • Standard for Steel Circular Saw Blade for cordless handheld dry-cutters …

DeWALT XPC High performance wood cutting blade set with thicker bi-metal blades providing a unique blade solution for ultimate control and accuracy of cut, even on the tightest of corners. They feature a plunge point tip design for easy plunge cutting with no kick-back and extra long life bi-metal blades which provide up to twice the number of cuts of standard HCS blades. The XPC Jigsaw blades have a new optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. Supplied with a 2 sided plastic storage case for convenient storage. Features and Benefits: XPC high performance jigsaw blades are designed for optimum cutting control and accuracy with …

Discover top-tier saw blades engineered specifically for cordless saws. Ideal for wood cutting, these blades seamlessly fit with the most sought-after cordless circular saw models, ensuring optimal performance and durability, all backed by Makita's renowned quality. Features & Benefits • Ultra-thin, perfectly tensioned steel plates for true run • Extends battery life • Precision honed, high-grade carbide for easy, smooth cuts and long life • Tooth configurations to meet specific cutting, material and thickness applications Specifications • Blade Diameter: 136mm • Kerf: 1.5mm • Bore: 10mm • Tooth Count: 36 • Thickness: 1mm • Rake: 18° • …

Maximum Battery Runtime - The Standard for Steel Circular Saw Blade maximises the cordless saw's battery runtime. Its extra-thin kerf reduces friction and material removal, consuming less power for effortlessly smooth sawing. High-quality carbide teeth support clean and precise results. It is suitable for cutting steel. The blade fits all common cordless handheld dry-cutters. The Standard for Steel Circular Saw Blade enables clean and precise results thanks to its high-quality carbide teeth. Bore works with or without reduction rings to fit different sizes. Features and Benefits • For Maximum Battery Runtime • Standard for Steel Circular Saw Blade for cordless handheld dry-cutters …

DeWalt Extreme Runtime Metal Reciprocating Sabre Saw Blades. Features & Benefits • Designed for cordless tools to maximise battery life and runtime • Up to 2x runtime and 2x longer life, ideally suited for FlexVolt • High efficiency design to achieve more cuts per charge Specifications • Manufacturer Code: DT99554-QZ • Quantity: 5 • Length: 230mm

Maximum Battery Runtime - The Standard for Steel Circular Saw Blade maximises the cordless saw's battery runtime. Its extra-thin kerf reduces friction and material removal, consuming less power for effortlessly smooth sawing. High-quality carbide teeth support clean and precise results. It is suitable for cutting steel. The blade fits all common cordless handheld dry-cutters. The Standard for Steel Circular Saw Blade enables clean and precise results thanks to its high-quality carbide teeth. Bore works with or without reduction rings to fit different sizes. Features and Benefits • For Maximum Battery Runtime • Standard for Steel Circular Saw Blade for cordless handheld dry-cutters …

Standard saw blade for all wooden materials, building panels, soft plastics and coarse cut. Can be used with the Festool machines HKC 55 and HK 55 For all wooden materials, building panels, soft plastics, coarse cut 160mm diameter blade, cutting width 1.80mm Hole diameter 20mm Chip angle 25.00°, 18 teeth

Whether you´re working on buildings or vehicles, a multi-tool saw blade that cuts well in any material can make the job a lot easier. The EXPERT MultiMax integrates all of Bosch´s most advanced manufacturing techniques and offers your multi-tool unparalleled versatility.- Bosch Curved-Tec saw blades became a firm favorite due to their ability to make clean plunge cuts in materials and deliver high quality difficult cuts. With the Bosch EXPERT MultiMax saw blade for multi-tools you can make these plunge cuts in the most demanding materials, such as sheet metal, carbon fiber and red brick.Features:- Long service life when cutting sheet metal and abrasive materials- Exceptional durability thanks to…

For Maximum Battery Runtime: Standard For Steel Circular Saw Blade For Cordless Handheld Dry-Cutters Maximises Battery Runtime The Standard For Steel Circular Saw Blade Enables Clean And Precise Results Thanks To Its High-Quality Carbide Teeth. The Blade Fits All Common Cordless Handheld Dry-Cutters. Extra-Thin Kerf Reduces Power Consumption Bore Works With Or Without Reduction Rings To Fit Different Sizes. Specifications:- Outer Diameter Mm: 160- Bore Size Mm: 20- Width Of Cut (B1) Mm / Base Bl. Thickness (B2) Mm: 1.6/1.2- Number Of Teeth: 36- Tooth Shape: Hb- Max. Rotation Speed (Rpm): 4600- Cutting Result: Fine Cut- Hook Angle ° Α: 6- Relief Angle ° Β: 10

The Milwaukee bandsaw blades are designed for use with the M18 FUEL series cordless bandsaws and corded machines. These are suitable for cutting angle iron, galvanised pipe and even tougher steels such as cast iron and stainless steel. Specifications • Length: 1139.83mm • Max Material Capacity: 4 - 5mm • Teeth: 18TPI • Pack Quantity: 3

S 1211 K Special for Ice Reciprocating Saw Blade delivers fast cuts in special materialsFeatures:- Very large tooth pitch (8.5 mm) and side-set teeth enable rapid cutting- Stainless steel blade is corrosion resistant, allowing cuts in frozen materials- Fits all S-shank reciprocating saws.Specifications:- Tooth design: side set, milled- Tooth spacing [mm]: 8.5- Tooth pitch [TPI]: 3- Total length [mm]: 300- Total length [Inch]: 12- Width [mm]: 19- Thickness [mm]: 1.25- Blade material: HighAlloySteel- Blade material abbreviation: HAS- Body material: HAS- Max. cut capacity [mm]: 250- Areas of application: Frozen materials (

Milwaukee Fang Tip Demolition Reciprocating Saw Blades. The fang tip allows for faster plunge cutting and reaching into restricted areas. Nail guard protects the tooth during nail impacts for increased durability and lifetime. 1.25 mm thick blade body for good strength and blade life making it ideal for wood with nails or bolts. Aggressive 5 Tpi geometry removes more material per stroke for faster cutting. Sloped shape excellent for plunge cutting and reaching into restricted areas. Shatter resistant Bi-Metal construction allows the blade to bend and flex without breaking. Specifications • Blade Length: 300mm • Max. Cutting Capacity (Plastic Pipes): 10-250mm • Max. Cutting Capacity …

With their HCS ground teeth, these Bosch jigsaw blades will cut effortlessly in wooden materials The Bosch 2608633622 T101B HCS Jigsaw Blades come in a pack of 25. They have HCS, ground teeth and are suitable for cutting softwood, chipboard, wood core plywood and fibreboards (3-30 mm). Compatible following manufacturers: AEG, Atlas, Copco, Bosch, Dewalt, Elu, Festool, Hitachi, Makita, Metabo and Skil. Features: Type T 101 B Material HCS Ground teeth + Total length: 100mm Tooth spacing: 2.7mm Shank Single lug shank Length of teeth: 74mm Tooth design ground teeth and taper ground Specification: Weight: 0.3kg Specification Clean for Wood Cuts Softwood Boards: 3-30mm

Makita SPECIALIZED Efficut Circular Saw Blade for Wood Cutting. 25 tooth blade specifically designed for greater efficiency when cutting wood with a cordless circular saw. Features & Benefits • Up to 25% faster cutting speed Specifications • Bore: 30mm • Diameter: 190mm • Kerf: 1.45mm • Rake: 23° • Tooth Count: 24

Circular Saw Blade / 260 mm Blade Diameter / 30 mm Blade Bore

FEIN Genuine accessory now with Star lock mounting
Fully compatible with all machines past and present.
Up to 25% more work progress
Makes more even, smoother movements possible.
The unique special geometry fixing produces greater rigidity
FEIN Genuine accessory now with Star lock mounting
Fully compatible with all FEIN machines past and present.
Up to 25% more work progress
Makes more even, smoother movements possible.
The unique special geometry fixing produces greater rigidity

For cutting out damaged tile joints. Also for cutting slots in plaster, porous concrete and similar building materials and for cleaning and reworking deck joints. Not suited to very hard epoxy resin or cement joints. The cost-effective alternative to diamond tools.Extra thin version. Cutting width approx. 1.2 mm. Segmented, ideal for working in corners and on edges without overcutting.Specifications:- Ø: 90 mm- Mount: SLP