Bike Lights Exposure

The Exposure Zip Tie Handlebar Mount is quick and easy to use and can be stored in your bag for later use on the trails, there's no need to faff around with the sizing because the zip ties get the per more→fect fit every time.Zip Tie Multi-purpose bracket made from injection moulded plastic, complete with two zip ties.Product Compatibility:AxisDiabloDiablo SYNCJoystickLink DBLink Plus DBSirius DBZenith

The pinnacle of helmet mounted lights, the rider-requested Exposure Zenith Mk3 Light has now reached even higher levels. Upgraded to 2200 lumens, with a long reaching, wider, diffused beam for more th more→an an hour. Combined with TAP technology, the rapid mode change technology, the rider can use the 2200 lumens when plummeting down a steep, fast descent or tackling a technical trail and then TAP to lower the lumens when on the flat or a climb to increase the run time.Exposure Zenith Mk3 Light Highlights1 - 24 Hours Runtime2200 LumensWeight 150g

Replacement elasticated headband and torch bracket for the Verso and RAW Pro head torches.The Exposure Verso Headband is 32mm wide and produces maximum support, eliminating the need for an overhead st more→rap. The brackets hold the low-weight head torch and battery close to the head for a stable, secure fit. A silicone strip lines the centre of the band offering increased holding performance and acting as a sweat wick, driving the sweat towards the back of the head.About Exposure LightsExposure Lights have always been designed to get the maximum light from the minimum-sized unit. Using superb brackets, Exposure Lights now include handlebar and helmet mounts, attaching quickly, safely and securely

The Exposure USB Charger Cable is the easiest way to charge your bike light when you are not near any mains; this cable allows you to power up the Exposure light from any USB power source, including y more→our laptop or computer! Different USB ports can vary in output which means times will vary depending on the device used to charge. The USB charger may take longer to charge your Exposure bike light than the mains charger but it is handy and compact so it can go anywhere with you and easily fit in to your pocket. Once you unplug your light from the cable and turn the light on you will be able to tell by the colour of the LED whether it is fully charged or not. About Exposure Lights Exposure

The Exposure Twin Helmet Mount has been designed to work with Trace/TraceR and Flash/Flare lights. This mount will fit most helmet types and is supplied with a short and long bolt to accommodate varyi more→ng shell thicknesses.Exposure Twin Helmet Mount SpecificationsProduct Compatibility: Trace DB,TraceR DB,TraceR ReAKT

The Exposure TraceR QR Bracket is a QR Seat post mount bracket for TraceR or RedEye MK2. Fastens using a silicon band, allows fitment to almost all seat post sizes.Product Compatibility:TraceR DBTraceR ReAKT

The Exposure TraceR MK3 ReAKT Peloton Rear Light packs technology and performance into a super compact rear light. ReAKT (Ambient Kinetic Technology) is the latest innovation automatically adapting th more→e light to conditions, flaring up to 120 lumens under braking or entering brighter environments, the addition of PELOTON mode, causes the TraceR to dim when the light from the rider behind is detected, the TraceR can still be seen. This light also features Optimised Mode Selector with 3 brightness levels, and side illumination.REAKTRear lighting that flares up automatically under braking. It can also intelligently adapt to the surrounding ambient light conditions to maintain maximum contrast and

The Exposure TraceR Kamm/D-Shaped Seatpost Bracket allows fitment of your TraceR rear light to a KAMM/D-Shaped Seatpost.

The Exposure TraceR/Flare Saddle Rail Bracket is designed to be used with the Flare and TraceR, this product will fit any standard rail design saddle.Product Compatibility:TraceR DBTraceR ReAKTFlare

The Exposure TraceR/Blaze Aero Seatpost Band and Shim consists of a band and wedge, this works with the the TraceR and Blaze seatpost mounts.

The Exposure TraceR Aero Seatpost Bracket allows you to fit your TraceR to all aero seatposts.

The Exposure TraceR DayBright Rear Light is the answer for the cyclist who needs a super compact rear light, with USB-C convenience and superb build quality. The TraceR features Exposure's DayBright p more→ulse pattern to cut through the distractions of busy roads, Optimised Mode Selector with 3 brightness levels, side illumination and Fuel Gauge making it clear when you need to recharge. The TraceR ensures you stay visible, both day and night, in the urban jungle and on rural roads.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.ITMPatented circuitry

The Exposure Trace MK2 DayBright Front Light outputs 125 lumens, it's the light of choice for the cyclist who needs a super compact unit with USB convenience and superb build quality. Features the Day more→Bright pulse pattern to cut through the distractions of busy roads, Optimised Mode Selector with 3 brightness levels, side illumination and Fuel Gauge making it clear when you need to recharge. The Trace ensures you stay visible, both day and night, in the urban jungle.OMSVarious programs in the lights can easily be selected to offer a choice of run times and modes so you can find the right one for your ride, be it an all-night adventure or an intense blast.ITMPatented circuitry within the light

The Exposure Trace MK3 and TraceR Light Set is a premium, extremely lightweight front and rear light set for urban commuting or daytime visibility. Now including the Trace MK2 which has gained more th more→an a 10% increase in power. Both Trace & TraceR feature; USB charging for convenience, a choice of 6 burn times, DayBright pulse pattern and side illumination for 360 ° visibility making this an attractive package.Exposure Trace MK2 and TraceR Light Set FeaturesBe Seen Be Safe - Bespoke pulse pattern designed for daylight use which is more conspicuous than a regular pulse and visible from over a kilometre away, even in the brightest conditions. DayBright mode will get you noticed. Be Seen Be

The Exposure Trace Action Mount Clip is an ABS Adaptor allowing you to fit Trace and TraceR lights to action camera brackets such as GoPro, AEE, Sony and many others, giving you a flexible mounting so more→lution.Product compatibility: Trace, Trace DayBright, TraceR, TraceR Daybright, TraceR ReAKT

The Exposure Toro Mk14 Light gives you 3600 Lumens punching from the 3 spread beam LEDs single track. Gravel trails and bike-packing adventures have met their match. Lightweight and the ability to adj more→ust burn times between 2 and 36 hours make the TORO the perfect travelling companion. REFEX ++ to Automatically provide the perfect output for any change in speed or terrain.REFLEX: Reflex automatically adjusts the light to provide boosted output when riding hard and fast then intuitively dimming for the slower sections such as climbs. This is all to optimise battery capacity, to provide extra light when needed and save it when not required. Reflex achieves this by using data from 3D digital

The Exposure Sync Remote Switch is a high quality replacement remote switch allowing wireless light operations for up to 2 Sync lights (Sixpack Sync, Maxx-D Sync, Diablo Sync).Exposure Sync Remote Swi more→tch FeaturesWhat's in the box: Sync Remote Switch, Switch Mount, Mounting O-Rings (large and small)Product Compatibility: Six Pack SYNC, MaXx D SYNC, Diablo SYNC

The Exposure Support Cell is an additional add-on power supply that comes in a robust shell for lightweight durability. Exposure Support Cells extend the burn time on your Exposure lights through Smar more→t Port Technology, ideal if you’re competing in an endurance race or are just greedy for power.Each Support Cell comes with a Support Cell Connector which allows you to charge the battery from your Smart Charger. The parts needed for mounting are also included. The 1.7A support cell is only compatible with the Verso head torch.Exposure Support Cells SpecificationsExposure Support Cell 1.7ACable Length: 30cmWeight: 60gExposure Support Cell 8.7ACable Length: 30cm (+65cm extension

The Exposure Support Cell is an additional add-on power supply that comes in a robust shell for lightweight durability. Exposure Support Cells extend the burn time on your Exposure lights through Smar more→t Port Technology, ideal if you’re competing in an endurance race or are just greedy for power.Each Support Cell comes with a Support Cell Connector which allows you to charge the battery from your Smart Charger. The parts needed for mounting are also included. The 1.7A support cell is only compatible with the Verso head torch.Exposure Support Cells SpecificationsExposure Support Cell 1.7ACable Length: 30cmWeight: 60gExposure Support Cell 8.7ACable Length: 30cm (+65cm extension

The Exposure Verso Support Cell bracket with overhead strap has been designed in conjunction with the Verso light that has the attachment for the Support Cell. This allows you to easily mount the supp more→ort cell on to the light securely so you have more power for your Verso light.The Overhead strap uses a simple Velcro attachment which fits snugly around the Exposure Verso Support Cell and the bracket and is compatible with either the 1.7A or the 2.9A. This cheap accessory will save you time and hassle when it comes to the time when you need to use your Support Cell.About Exposure LightsExposure Lights have always been designed to get the maximum light from minimum sized unit and Cable Free

The Exposure Support Cell 3.4A is designed to extend the burn time on your Exposure lights through Smart Port Technology. Ideal if you’re competing in an endurance race or are just greedy for po more→wer.Each Support Cell comes with a Support Cell Connector which allows you to charge the battery from your Smart Charger. The parts needed for mounting are also included.Exposure Support Cell 3.4A SpecificationsCable Length: 30cmWeight: 75gCompatability: Equinox, Diablo, Axis, Joystick, Sirius, HT1000

The Exposure Strada Mk12 SB Light, with the Road Specific Beam Pattern and with an increased 1700 lumens; with the specific cut outs to allow side illumination, and reversible graphics to remind that more→the Strada can be mounted either way up without a change to beam pattern or technology. The included remote switch allows the rider to dim when an oncoming vehicle to reduce dazzling and keeping the rider in total control without taking hands off the bars. Exposure Strada Mk12 SB Light Highlights2 - 36 Hours Runtime1700 LumensWeight 230g

The Exposure Strada Mk12 Super Bright AKTiv Light is at the peak of the Exposure Lights Road range, featuring a Road-Specific Beam Pattern and elevated to 1700 measured lumens. When AKTiv is selected, more→the light will sense oncoming light sources and auto dim when a vehicle is approaching, no button or thinking required. Specific cut outs to allow side illumination to ensure the rider is visible through 240°. The reversible graphics are a reminder that the Strada can be mounted either way up without a change to beam pattern or technology. There is also a remote switch included which allows the rider to take control if desired.Exposure Strada Mk12 Super Bright AKTiv Light Highlights1700