Turntable Cartridges Audio-Technica

The Audio Technica ATN81CP is a replacement stylus for the AT81CP P-mounted Moving Magnet Cartridge. The simple robust structure of the 0.6mil conical bonded stylus tip offers a balance between being budget-friendly and having higher durability. Handled correctly the result is an approximate lifetime of 300 to 500 hours of play. Having a replacement stylus on hand ensures none stop enjoyment of your record collection with a quick and easy swap-out process.

Replacement stylus for AT91R cartridge.0.6 mil conical replacement stylus for these cartridges: AT91R and CN5625AL
Тype: Replacement Stylus
Material: Plastic
Application: Hi-Fi
Package Quantity (pcs): 1
Colour: Red
Made in: Japan
Suitable for Brand: Audio-Technica
Shape: Conical
Suitable for: AT91R
Variant: ATN91R

The AUDIO TECHNICA AT-81CP Record Player Needle Cartridge Black is a high-quality, versatile cartridge designed specifically for use with turntables. It offers exceptional audio performance and is suitable for both casual listeners and avid vinyl enthusiasts.With its sleek black design, the AT-81CP cartridge enhances the visual appeal of any turntable setup. It is easy to install and compatible with a wide range of turntable models, making it a versatile choice for vinyl lovers.Featuring a conical stylus, the AT-81CP cartridge ensures precise tracking of the record's grooves, resulting in high-fidelity sound reproduction. It delivers excellent frequency response and low distortion, capturing …

ATN85EP Replacement stylus for AT85EP cartridge. Replacement stylus for AT85EP, Elliptical bonded stylus and Tracking force: 1.0 to 1.5 g (1.25 g standard)
Тype: Replacement Stylus
Material: Plastic
Made in: Japan
Application: Hi-Fi
Colour: White
Suitable for: AT85EP
Suitable for Brand: Audio-Technica
Shape: Elliptical
Tracking Force: 1g - 1,5g
Variant: ATN85EP
Tracking force recommended: 1,25g

Universal 1/2" mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Made in: China
Colour: Black
Original Colour by Producer: Black;Black

Universal 1/2" mount headshell for 4-pin turntable cartridges. It features an ultra-lightweight (9 g) aluminum die-cast body to keep vibration to a minimum and a finger lift to enable precise stylus placement. The headshell is also equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
Colour: Silver
Original Colour by Producer: Silver;Silver
Made in: China

The universal AT-HS4BK headshell in silver designed for use with straight 4-pin tonearms. The AT-HS4BK model features an ultra-lightweight (8.5 g) aluminum die-cast body to keep vibration to a minimum. The advantage is a very simple and accurate placement of the stylus. The headshell is also equipped with color-coded lead wires and comes with mounting screws.
Colour: Grey
Made in: China
Material: Aluminium
Тype: Headshell
Weight (g): 8.5

This 0.3 x 0.7 mil elliptical cartridge fits P-mount turntables. It features precision engineering and many other features found in the more expensive Audio-Technica cartridges.
Channel balance at 1 kHz: 2 dB
Channel separation at 1 kHz: 20 dB
Suitable for Brand: Technics;Linear Tracking T4P Turntables;Hitachi;Pioneer
Recommended load capacitance: 100 - 200 pF
Weight (g): 0.0
Voltage: 3,5 mV
Stylus tip radius: 0,3 x 0,7 mil
Tracking force recommended: 1,25 g
Tracking Force: 1 - 1,5 g
Package Contents: Cartridge Installation Screw;Nut
Application: Hi-Fi
Recommended load resistance: 47 kOhm
Variant: AT85EP
Frequency Range: 20 Hz - 20 kHz
Colour: White;Black
Weight: 6 g
Tracking angle: 20°
Shape: E…

Adjustable headshell manufactured from aluminium, complete with gold plated terminal quad wire. The AT-LT13A has an adjustable overhang, as well as internal headhsell threads to avoid the use of nuts when fitting cartridges.
Made in: China
Colour: Black

Even the finest diamond stylus becomes worn after an extended period of play.The styli for the VM cartridges are no different. But it is easy to replace the stylus and continue to use your cartridge. The new VM cartridges have 7 styli and 3 types of bodies to choose from. Not only is it not necessary to buy an entirely new cartridge but you can also enjoy the experience of upgrading your stylus or trying a new cartridge/stylus combination.

A replacement stylus for AT-XP5 cartridge.
Shape: Elliptical
Frequency Range: 20 Hz - 18 kHz
Made in: Japan

Dual moving magnet stereo cartridge. The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.
Тype: Cartridge;VM Stereo Dual Magnet
Shape: Conical
Frequency Range: 20 Hz - 18 kHz
Tracking force recommended: 3g
Tracking angle: 20°
Tracking Force: 2g - 4g
Mounting: 1/2"
Recommended load resistance: 47 kOhm
Made in: Japan
Channel separation at 1 kHz: 20
Voltage: 5.5 mV
Recommended load capacitance: 100-200 pF
Impedance (Ohm): 6700.0
Weight (g): 6.2…

The replacement stylus for VM520EB. 0,3 x 0,7 mil Elliptical Bonded stylus.
Tracking Force: 1,8g - 2,2g
Suitable for: VM520EB
Variant: VMN20EB
Made in: Japan
Suitable for Brand: Audio-Technica
Package Quantity (pcs): 1
Shape: Elliptical
Tracking force recommended: 2 g
Application: Hi-Fi
Тype: Replacement Stylus
Colour: Blue
Material: Plastic

Combo kit includes the AT-VM95C dual moving magnet cartridge premounted on the AT-HS6BK headshell.
Made in: China
Colour: Blue;Black
Тype: Cartridge;VM Stereo Dual Magnet
Mounting: 1/2"
Recommended load resistance: 47 kOhm
Tracking force recommended: 2 g
Frequency Range: 20 Hz - 20 kHz
Tracking angle: 23°
Shape: Conical
Weight (g): 15.5
Impedance (Ohm): 3300.0
Recommended load capacitance: 100-200 pF
Voltage: 4 mV
Tracking Force: 1,8g - 2,2g

Replacement cartridge with half-inch mount that is specially designed for the needs of DJs and features a highly-rigid polyphenylene sulfide (PPS)/glass fibre body and a tracking force of 2 to 4 grams (3 grams standard). It also offers a powerful output level of 5.5 mV, and its 0.3 x 0.7 mil elliptical bonded stylus tip tracks the record groove with high accuracy for outstanding audio reproduction. Durable carbon fibre-reinforced ABS cantilever and nylon wire suspension further ensure precise tracking and channel separation (20 dB at 1 kHz). The cartridge is also specifically designed to provide maximum visibility of the stylus tip. Frequency response: 20 Hz-18 kHz. Recommended load impedance: …

TechniHard adjustable headshell with AT6101 quad wire. With a mass of 18 g, the AT-LP18/OCC cell holder is used to adjust the cell advance and its azimuth. With its threaded end, it does not require the use of nuts when mounting the cell.
Colour: Silver
Made in: China

Adjustable overhang and adjustable azimuth (tilt)
Threaded headshell avoiding in use of nuts when fitting cartridge
7 pairs of installation screws (3mm, 5mm, 6mm, 8mm, 10mm, 12 mm and 14mm)
1 hexagon wrench (for overhanging and tilt adjustment)

The VM510CB conical stylus cartridge is the entry-level 500 Series. It is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. Includes mounting hardware.
Tracking Force: 1,8g - 2,2g
Channel balance at 1 kHz: 1,5 dB
Suitable for Brand: Ordinary Turntable Brands
Weight: 6,4 g
Stylus tip radius: 0,6 mil
Recommended load capacitance: 100 - 200 pF
Compliance: 8 x 10-6 cm (100Hz)
Suitable for: Turntables
Weight (g): 0.0
Channel separation …

The AT-LH11H is a universal ½"-mount aluminum headshell that weighs only 11 grams – the lightest in the LH series – allowing it to be used with a wider range of cartridges on more turntables and tonearms than the other models.With its non-threaded through-holes, the AT-LH11H is ideal for mounting cartridges with threaded mounting holes, such as the AT-OC9X, AT-ART9X, and VM95 Series cartridges. Like all LH models, this headshell has a hard anodized finish that reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. The headshell includes cartridge installation …

The AT-LH13H is a 13-gram universal headshell designed for 4-pin turntable cartridges with threaded bodies, such as the AT-OC9X Series and VM95 Series. This aluminum headshell with hard anodized finish reduces unwanted vibration and is equipped with OFC lead wires. It also features an adjustable cylinder and comes with installation screws, plastic washers, and a hexagonal wrench.
Package Contents: Plastic Washer;Hexagonal Wrench;Cartridge Installation Screw
Compatible with: VM95 cartridge series;AT-OC9x cartridge series
Weight: 13 g
Variant: 13 g
Original Colour by Producer: Black
Made in: China
Тype: Headshell
Suitable for Brand: Audio-Technica
Colour: Black
Material: Aluminium
Weight (g): 1…

The AT-LH18H is a 18-gram universal ½"-mount headshell optimised to accommodate 4-pin turntable cartridges with threaded bodies such as the AT-OC9X Series and VM95 Series cartridges. This aluminium headshell with hard anodised finish reduces unwanted vibration and comes equipped with OFC (oxygen-free copper) lead wires. It also features an adjustable cylinder that enables precise azimuth and overhang settings. Includes cartridge installation screws plastic washers and a hexagonal wrench. 

Elliptical Nude replacement stylus from VM95 series.
Colour: Orange
Application: Hi-Fi
Suitable for Brand: Audio-Technica
Made in: China
Shape: Elliptical
Тype: Replacement Stylus
Material: Plastic
Suitable for: VM95NEN

The VM520EB is part of the 500 Series in Audio-Technica’s new VM cartridge line – a line that harks back to A-T’s early days as a manufacturer primarily of high-end phono cartridges, while also incorporating today’s advanced technology. Like all VM cartridges, the VM520EB is equipped with dual magnets that are positioned to match the left and right channels in the stereo record groove for outstanding channel separation and extended frequency response. The cartridge’s 0.3 x 0.7 mil elliptical bonded stylus tracks the record groove with high accuracy for outstanding audio reproduction.
Recommended load capacitance: 100 - 200 pF
Channel balance at 1 kHz: 1,5 dB
Compliance: 8 x 10-6 cm (100Hz)…

Set includes AT-VM95SP cartridge from VM95 series mounted on AT-HS6BK headshell.
VM95 Series - Styli compatibility: Every cartridge diamond stylus becomes worn after a period of play. Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus. Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus. The six models of VM95 Series …