Other Transmission Components Shimano

Shimano FD-TZ500 6-speed MTB front derailleur down swing top pull 31.8mm 66-69 42TGreat value front derailleur that delivers accurate and low-friction shiftingCompatible with 6-speed drivetrainsDown s more→wing (conventional) design is light action and compatibleFor use on MTB style bikes with 66 to 69 degree seat tube to chainstay angleDeveloped to work with 42 tooth outer chainring

Easy connection "Can be mounted without tools "Not reusable・Compatible with current chains for 11-speed tranSMissions・Quick assembly tools "TL-CN10

Shimano Quick Link for 12-Speed Chains 2 Pack The Quick Link two-pack is for use with Shimano’s Hyperglide+ 12-speed chains. Easy to install or remove without the use of tools, the pack provides two more→non-reusable links for trailside repairs.

The shimano dura-ace di2 r9150 front derailleur adapter for 34.9 mm clamp has an elaborate system called system supremacy. Each component improves the qualities of the others to guarantee excellent re more→sults. Advantages of system supremacy:new hub arm design for optimal power transferprecise and simple front derailleur set with lighter and more intuitive shift operation shimano shadow rd construction for stable shifting resultsperfectly balanced hydraulic braking system for racing with better heat dissipationice technologies freeza

Shimano RD-TY300 6/7-speed rear derailleur with mounting bracketShimano TY300 6 / 7-speed rear derailleur (bracket attachment)SIS rear index shiftingSGS cage can handle wide range gearing and 34 tooth more→sprockets13 tooth pulleys offer long service life and less noise

Less maintenance due to suitable structure "Dual-tension rear derailleur・Cable guide roller to provide high resistance to cable tension・More than 20% lighter than RD-FT30 (DATT: -70 g, ROAD crankset: more→-90 g, BMX crankset: -80 g) (mainly due to the cable guide roller)・Sufficiently low profile and enough space from the ground to prevent the rear derailleur from touching obstacles・Redesigned appearance (RD-FT55)・Interchangeable with the 7/6 speed MTB system from SHIMANO・Only for front use "Compatible with 11 dts large sprocket (total capacity of 17 dts)

Adaptable for mountain bikes and VTCStraight shifter8 indexed gears

##Shimano EW-SD50 E-tube Di2 electric wire, 250mm The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and st more→retching, but provides effortless gear shifts. The Shimano EW-SD50 E-tube Di2 electric wire, 250mm connects the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. The water resistant connectors are reliable and secure and come in variable lengths as it is not possible to cut them to fit.

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of more→electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of more→electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of more→electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Shimano EW-AD305 SD300 to SD50 Conversion Adapter The EW-AD305 SD300 to SD50 Conversion Adapter allows the older Shimano Di2 SD50 E-Tube wires to be connected to the newer, slimmer EW-SD300 wires. It more→provides a secure and reliable connection that is stable and water-resistant.

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Featu more→res:E-tube steps ep8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-sd300 wires use a slim 3.45 mm diameter plug, they can be connected to ew-sd50 wires with the use of ew-ad305 adapterEW-sd300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Featu more→res:E-tube steps ep8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-sd300 wires use a slim 3.45 mm diameter plug, they can be connected to ew-sd50 wires with the use of ew-ad305 adapterEW-sd300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors

Shimano EW-SD300 E-tube Di2 Electric Wire 150mm - 250mm For use with Shimano Di2 electronic groupsets, the EW-SD300 E-tube Di2 Electric Wire 150mm - 250mm provides a reliable signal transfer between more→components. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.

Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm A Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm is required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, more→front mech, battery and to the handlebar battery indicator junction box. Reliable and secure water-resistant connectors. Please note: EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables.

Down Swing designFastener Type: L-Tape (34.9mm with 31.8mm and 28.6mm adapter)Pull type: Double pullPackaging: Individually wrapped

Shimano EW-JC302 SD300 2 Port Junction The EW-JC302 2 Port Junction connects EW-SD300 wires in any Shimano electronic Di2 setup. It sits neatly inside the frame and is extremely reliable with water-r more→esistant connectors.

Shimano EW-JC200 E-tube Di2 2 Port Junction Keep your wires in check with the Shimano EW-JC200 E-tube Di2 2 Port Junction. Designed to sit inside the frame tubing, this reliable and water-resistant more→unit is designed for all Shimano Di2 electronic wired systems. Please note, does not come with cables.

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Featu more→res:E-tube steps ep8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-sd300 wires use a slim 3.45 mm diameter plug, they can be connected to ew-sd50 wires with the use of ew-ad305 adapterEW-sd300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Featu more→res:E-tube steps ep8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-sd300 wires use a slim 3.45 mm diameter plug, they can be connected to ew-sd50 wires with the use of ew-ad305 adapterEW-sd300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Featu more→res:E-tube steps ep8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-sd300 wires use a slim 3.45 mm diameter plug, they can be connected to ew-sd50 wires with the use of ew-ad305 adapterEW-sd300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors

The removal of traditional mechanical cables in favour of electrical wires not only eliminates poor shifting caused by contaminates, corrosion and stretching, but provides effortless gear shifts.Featu more→res:E-tube steps ep8 uses a fully removable individual cable system enabling fine tuning with the correct cable length to each component for easy and tidy fitmentEW-sd300 wires use a slim 3.45 mm diameter plug, they can be connected to ew-sd50 wires with the use of ew-ad305 adapterEW-sd300 individual wires are available in varying lengths, there is no need (or facility) to cut these cablesReliable and secure water resistant connectors

Shimano EW-SD300 E-tube Di2 Electric Wire 300mm - 450mm The EW-SD300 E-tube Di2 Electric Wire 300mm - 450mm from Shimano is used to connect the components within an electronic drivetrain together. 3. more→45mm diameter plugs provide a reliable, water-resistant connection. Please select the most appropriate length, these cables cannot be trimmed to length. Image for illustration purposes only, not indicative of actual length.