Paints & Enamels Crown Trade

Crown Trade Full Undercoat is a high VOC content finish. An oil based product that is applied by brush and is suitable for interior and exterior use. Touch dry in 4-6 hours and recoatable after 16-24 more→hours.Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.

Crown Trade Full Gloss is a high VOC content gloss finish. A washable oil based product that is applied by brush or roller and is suitable for interior and exterior use. Touch dry in 4-6 hours and rec more→oatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Crown Trade Full Gloss is a high VOC content gloss finish. A washable oil based product that is applied by brush or roller and is suitable for interior and exterior use. Touch dry in 4-6 hours and rec more→oatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Crown Trade Fastflow Quick Dry Primer Undercoat is a water-based primer undercoat with excellent coverage and quick drying properties, specially formulated for use with Crown Trade Fastflow Quick Dry more→Gloss, to achieve a smooth gloss finish.Suitable for interior and exterior joinery and correctly prepared metalwork. - Feels like a traditional undercoat - Quick Drying - Interior and Exterior use - Ideal basecoat for Crown Trade Fastflow Quick Dry Gloss

Crown Trade Fastflow Quick Dry Gloss is a water-based, durable gloss finish for use on suitably prepared interior and exterior joinery and metalwork.Fastflow Quick Dry Gloss has excellent opacity, and more→a high gloss finish, with the added benefit of staying whiter for longer, compared to traditional solvent-borne gloss. - Feels like a traditional gloss - Quick drying - Excellent flow - High sheen - Interior and Exterior Use - For best results apply two coats

Reduces risk of corrosion Suitable for interior and exterior use Excellent adhesion Rust inhibiting properties Solvent-based

Crown Trade Eggshell is a high VOC content eggshell finish. A Washable oil based product that is applied by brush or roller and is suitable for interior use. Touch dry in 4-6 hours and recoatable afte more→r 16-24 hours. Eggshell is a tough, durable mid sheen finish for wood and metal. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

Crown Trade Fastflow Quick Dry Satin is a water-based, durable satin finish for use on suitably prepared interior and exterior joinery and metalwork.Fastflow Quick Dry Satin has excellent opacity, and more→a Satin finish, with the added benefit of staying whiter for longer, compared to traditional solvent-borne satin. - Feels like a traditional Satin - Quick drying - Excellent flow - Interior and Exterior Use - For best results apply two coats

Crown Trade Satin Finish is a high VOC content satin finish. A washable oil based product that is applied by brush and is suitable for interior use. Touch dry in 4-6 hours and recoatable after 16-24 h more→ours. Satin is a tough, durable mid sheen finish for wood and metal. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

Crown Trade Acrylic Primer Undercoat is a low VOC content finish. A product which is thinned with water and is applied by brush and is suitable for interior and exterior use. Touch dry in 1 hour and r more→ecoatable after 4 hours.Do not apply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.

Excellent flow For interior and exterior use Non yellowing Quick drying Virtually solvent free

Crown Trade Matt Vinyl is a low VOC content matt finish. A wipeable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray and is suitable for interior use. T more→ouch dry in 1-2 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Wipeable products are suitable for light traffic areas where occasional cleaning is required. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Crown Trade Fastflow Quick Dry Eggshell White is a water based product which is suitable for use on correctly prepared interior and exterior metalwork and joinery. Breatheasy formulation offers low od more→our, quick drying and minimal disruption through decorating.99% solvent free, but provides a solvent based finish with all of the benefits of a water based system. Excellent flow properties and provides a contemporary eggshell finish. Touch dry in 1-2 hours and recoatable in 4-6 hours.

Crown Trade Matt Vinyl is a low VOC content matt finish. A wipeable product which is thinned with water and is applied by brush, roller, airless spray or HVLP Spray and is suitable for interior use. T more→ouch dry in 1-2 hours and recoatable after 4 hours. Matt emulsion is a decorative coating providing a flat finish for use on walls and ceilings. Wipeable products are suitable for light traffic areas where occasional cleaning is required. Can be applied to coated plaster surfaces without thinning. On new plaster, thin the first coat with water to manufacturers recommendations.

Crown Trade Full Gloss is a high VOC content gloss finish. A washable oil based product that is applied by brush or roller and is suitable for interior and exterior use. Touch dry in 4-6 hours and rec more→oatable after 16-24 hours. Gloss is a tough, durable high sheen finish for wood and metal, providing good resistance to knocking and scuffing. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer and undercoat.

Crown Trade Full Undercoat is a high VOC content finish. It is an oil based product that is applied by brush. It is suitable for interior and exterior use. It is touch dry in 4-6 hours and recoatable more→after 16-24 hours.

Crown Trade Full Undercoat is a high VOC content finish. It is an oil based product that is applied by brush. It is suitable for interior and exterior use. It is touch dry in 4-6 hours and recoatable more→after 16-24 hours.

Crown Trade Fastflow Quick Dry Gloss is a water-based, durable gloss finish for use on suitably prepared interior and exterior joinery and metalwork. Fastflow Quick Dry Gloss has excellent opacity, an more→d a high gloss finish, with the added benefit of staying whiter for longer, compared to traditional solvent-borne gloss. - Feels like a traditional gloss - Quick drying - Excellent flow - High sheen - Interior and Exterior Use - For best results apply two coats

Crown Trade Fastflow Quick Dry Primer Undercoat is a water-based primer undercoat with excellent coverage and quick drying properties, specially formulated for use with Crown Trade Fastflow Quick Dry more→Gloss, to achieve a smooth gloss finish.Suitable for interior and exterior joinery and correctly prepared metalwork. - Feels like a traditional undercoat - Quick Drying - Interior and Exterior use - Ideal basecoat for Crown Trade Fastflow Quick Dry Gloss

Crown Trade Wood Primer is a high VOC content finish. A product that is applied by brush and is suitable for interior or exterior use. Touch dry in 4-6 hours and recoatable after 16-24 hours. Do not a more→pply when air or substrate temperatures are likely to fall below 8°C or when the relative humidity is above 80% during application or the drying period.

Crown Trade Satin Finish is a high VOC content satin finish. A washable oil based product that is applied by brush and is suitable for interior use. Touch dry in 4-6 hours and recoatable after 16-24 h more→ours. Satin is a tough, durable mid sheen finish for wood and metal. Can be applied over most previously painted surfaces without an undercoat. On new surfaces apply over the top of a suitable primer.

Crown Trade Mid Sheen is a low VOC content mid sheen finish. A washable product which is thinned with water and is applied by brush, roller or spray and is suitable for interior use. Touch dry in 1-2 more→hours and recoatable after 4 hours. Soft Sheen emulsion is a decorative coating providing a low sheen finish for use on walls and ceilings.Washable products are ideal for medium traffic areas such as lounges and bedrooms.Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with soft sheen emulsion.

Crown Trade Silk Vinyl is a low VOC content mid sheen finish. A washable product which is thinned with water and is applied by brush, roller or spray and is suitable for interior use. Touch dry in 1-2 more→hours and recoatable after 4 hours. Soft Sheen emulsion is a decorative coating providing a low sheen finish for use on walls and ceilings.Washable products are ideal for medium traffic areas such as lounges and bedrooms.Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with soft sheen emulsion.

Crown Trade Silk Vinyl is a low VOC content mid sheen finish. A washable product which is thinned with water and is applied by brush, roller or spray and is suitable for interior use. Touch dry in 1-2 more→hours and recoatable after 4 hours. Soft Sheen emulsion is a decorative coating providing a low sheen finish for use on walls and ceilings.Washable products are ideal for medium traffic areas such as lounges and bedrooms.Can be applied to coated plaster surfaces without thinning. On new plaster, it is ideal to use a thinned first coat of matt emulsion or contract emulsion as a priming coat, prior to finishing with soft sheen emulsion.