Rounding cutters

1/4" Rounding 25 x 7mm Radius TCT Router Bit Contents 1 x TCT Router Bit, 1/4" Rounding, 25 x 7mm Radius

This Tungsten Carbide tipped cutter is similar to an ovolo cutter and provides a rounded profile along the edge of the material.It differs from ovolo cutters by producing a single step only. Shank: 1/ more→4in. Features: Produces a stepped rounded profile along the edge of the material TCT cutting edges TCT cutting edges Guide pin enables the cutter to follow intricate shapes Differs to Ovolo cutter by producing a single step only Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB41

Tungsten carbide cutting edges, suitable for DIY and professional use. Supplied with 2 bearings (9.5 & 12.7mm) to enable use as either ovolo or rounding over bits. The guide bearing can follow complex more→and intricate shapes and the cutters are suitable for use on softwoods, hardwoods, MDF and plywood. Shank: 1/4in. Features: With two bearings (9.5 and 12.7mm) to enable use as Ovolo or rounding over bit TCT TCT Specifications: Dimensions: H:12.0 x W:2.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB112

1/4 Rounding 38 x 14mm Radius TCT Router BitPTDDRPDIR75343"

Tungsten carbide cutting edges, suitable for DIY and professional use. Supplied with 2 bearings (9.5 & 12.7mm) to enable use as either ovolo or rounding over bits. The guide bearing can follow complex more→and intricate shapes and the cutters are suitable for use on softwoods, hardwoods, MDF and plywood. Shank: 1/4in. Features: With two bearings (9.5 and 12.7mm) to enable use as Ovolo or rounding over bit TCT TCT Specifications: Dimensions: H:12.0 x W:3.0 x D:5.5 cm Colour: Multi Guarantee:5 years Material: Tungsten Carbide Model Number: FAIRB111

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metri more→c: 9 • Cut Length Imperial: 23/64 • Overall Length Metric: 51.5 • Radius 1 Metric: 4.8

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metri more→c: 13.5 • Overall Length Metric: 57 • Radius 1 Metric: 6.3

The Trend CraftPro Round Over Cutter leaves perfect superfine round over detail for a contemporary eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutti more→ng edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers 'K' marked to ensure safe working practices. Supplied with two bearings for Round Over or Quirked Ovolo moulding for additional options for fine detailing on boxes and model making work.The Trend C074 x 1/4 TC Round Over Two Flute Cutter with a 1/8in imperial radius for matched …

For producing ovolo and rounding over edge moulds, using a side fence or back fence. Specifications • Shank Diameter: 1/4 • Dia Metric: 22.2 • Dia Imperial: 7/8 • Cut Length Metri more→c: 15 • Cut Length Imperial: 19/32 • Overall Length Metric: 58.5 • Radius 1 Metric: 9.5

The Trend CraftPro Bearing Guided Ovolo Round Over Cutter for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. With two carbide TCT cutting tips for more→cleaner cutting edges and fast clearance of waste in all timber and timber based materials.The 1/4in shank for easy control in smaller routers with 'K'mark to ensure safe working practices. A PTFE coating minimises heat and resin build up for increased cutter performance and longevity. The 1/4in radius for matched imperial replication work ideal for lighter round over and Ovolo detail or bullnosing on thinner stock.This Trend C076 x 1/4 TCT Bearing Guided Ovolo & Round Over has the following specification: …

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 1.6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timb more→er and timber based materials. Leaves perfect superfine round over detail for a contemporary eased edge arris profile on straight and curved edges. Two bearings supplied for round over or quirked Ovolo moulding for additional options for fine detailing on boxes and modelmaking work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications …

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 61 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 3.2 • Radius 1 Imperial: 1/8

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 3mm radius Two Flute Carbide tips. PTFE coating to minimise heat and resin build up for increased cutter performance and longevit more→y. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Two bearings supplied for round over or quirked Ovolo moulding for additional detailing options. 1/4in shank for smaller routers and easy control for hand held use. Leaves perfect fine round over detail for a contemporary eased edge profile on straight and curved edges. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials.…

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces and give more→s sharp corners. The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing. The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications • Shank Diameter: 1/4 • Dia Metric: 11.1 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 46 • Bearing Dia Metric: 4.8 • Radius 1 Metric: 3.…

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces and give more→s sharp corners. The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing. The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 46 • Bearing Dia Metric: 4.8 • …

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber more→and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 6mm radius ideal for lighter round over and Ovolo detail or bullnosing on thinner stock. 1/4in shank for smaller routers and easy control for hand held use. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to …

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 3/16in radius Two Flute Carbide tips. Bearing guided classic round over detail for edge detailing on curved and straight work wit more→h additional bearing for quirked Ovolo detail option. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 3/16in radius for matched imperial replication work, ideal for lighter roundover, Ovolo or bullnosing detail work on smaller furniture work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe …

The Trend CraftPro Round Over Cutter leaves perfect superfine round over detail for a contemporary eased edge arris profile on straight and curved edges. With two carbide TCT tips for cleaner cutti more→ng edges and fast clearance of waste in all timber and timber-based materials. A PTFE coating minimises heat and resin build-up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers 'K' marked to ensure safe working practices. Supplied with two bearings for Round Over or Quirked Ovolo moulding for additional options for fine detailing on boxes and model making work.The Trend C078 x 1/4 TC Round Over Two Flute Cutter will cut full bullnose profile for detailing …

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 62.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 6.3 • Radius 1 Imperial: 1/4

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/4 • Dia Metric: 18 • Dia2 Metric: 12 • Cut Length Metric: 10 • Ov more→erall Length Metric: 38.6 • Radius 1 Metric: 3

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11 • Overall Length Metric: 38 more→• Radius 1 Metric: 4

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16