Diamond Core Bits & Milling Cutters RUKO

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.The fine toothing is particularly suitable for cutting metals. It ensures smoot more→her running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.Specifications:- Ø: 52,0 mm- Material HSSE-Co 8- Cutting direction right hand cutting- Cutting depth 38,0 mm- Cutting angle work´s specification- Weight 0,1…

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.The Fine Toothing Is Particularly Suitable For Cutting Metals. It Ensures Smoot more→her Running And Reduces The Necessary Effort. The Reduction In Heat Development During Cutting Increases Tool Life, Especially In The Case Of Metals. Suitable For Alloyed And Non-Alloyed Steels (Up To 1.000 N/Mm² Strength), High Chromium Alloyed Steels Such As Stainless Steel, Steels Resistant To Rusts And Acids, Non-Ferrous And Light Metals.Specifications:- Ø: 54,0 Mm- Ø (Inch): 2 1/8 Inch- M + Pg: Pg 42- Material: Hsse-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Ang…

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.The Fine Toothing Is Particularly Suitable For Cutting Metals. It Ensures Smoot more→her Running And Reduces The Necessary Effort. The Reduction In Heat Development During Cutting Increases Tool Life, Especially In The Case Of Metals. Suitable For Alloyed And Non-Alloyed Steels (Up To 1.000 N/Mm² Strength), High Chromium Alloyed Steels Such As Stainless Steel, Steels Resistant To Rusts And Acids, Non-Ferrous And Light Metals.Specifications:- Ø: 57,0 Mm- Ø (Inch): 2 1/4 Inch- Material: Hsse-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Spec…

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.The fine toothing is particularly suitable for cutting metals. It ensures smoot more→her running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.Specifications:- Ø: 64,0 mm- Ø (inch): 2 1/2 inch- Tube dimensions: 2 inch- Material: HSSE-Co 8- Cutting direction: right hand cutting- Cutting depth: 38,0 m…

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.The fine toothing is particularly suitable for cutting metals. It ensures smoot more→her running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.Specifications:- Ø: 63,0 mm- Material: HSSE-Co 8- Cutting direction: right hand cutting- Cutting depth: 38,0 mm- Cutting angle: work´s specification- Weight: 0,1…

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.The fine toothing is particularly suitable for cutting metals. It ensures smoot more→her running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.Specifications:- Ø: 76,0 mm- Ø (inch): 3 inch- Tube dimensions: 2 1/2 inch- Material: HSSE-Co 8- Cutting direction: right hand cutting- Cutting depth: 38,0 m…

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.The fine toothing is particularly suitable for cutting metals. It ensures smoot more→her running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.Specifications:- Ø: 67,0 mm- Ø (inch): 2 5/8 inch- Material: HSSE-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Spec…

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.On Easily Cut Materials The Varied Toothing Ensures That The Cut Is More Even A more→nd Requires Less Effort. The Reduction In Vibrations And Heat Development During Cutting Achieves Up To Three Times The Tool Life. Suitable For Unalloyed Steel (Up To 700 N/Mm² Strength), Non-Ferrous And Light Metals, Plastics, Plasterboard And Light Building Boards, Fibreboard, Plywood And Wood.Specifications:- Ø: 102,0 Mm- Ø (Inch): 4 Inch- Material: Hss- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Specification- Weight: 0,34500 Kg

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.The Fine Toothing Is Particularly Suitable For Cutting Metals. It Ensures Smoot more→her Running And Reduces The Necessary Effort. The Reduction In Heat Development During Cutting Increases Tool Life, Especially In The Case Of Metals. Suitable For Alloyed And Non-Alloyed Steels (Up To 1.000 N/Mm² Strength), High Chromium Alloyed Steels Such As Stainless Steel, Steels Resistant To Rusts And Acids, Non-Ferrous And Light Metals.Specifications:- Ø: 70,0 Mm- Ø (Inch): 2 3/4 Inch- Material: Hsse-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Spec…

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.The Fine Toothing Is Particularly Suitable For Cutting Metals. It Ensures Smoot more→her Running And Reduces The Necessary Effort. The Reduction In Heat Development During Cutting Increases Tool Life, Especially In The Case Of Metals. Suitable For Alloyed And Non-Alloyed Steels (Up To 1.000 N/Mm² Strength), High Chromium Alloyed Steels Such As Stainless Steel, Steels Resistant To Rusts And Acids, Non-Ferrous And Light Metals.Specifications:- Ø: 89,0 Mm- Ø (Inch): 31/2 Inch- Material: Hsse-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 Mm- Cutting Angle: Work´S Spec…

The Ruko Bi-Metal Hole Saws Can Be Used In Hand And Pillar Drills. When Employing Pillar Drills, Use Manual Advance Only.The Fine Toothing Is Particularly Suitable For Cutting Metals. It Ensures Smoot more→her Running And Reduces The Necessary Effort. The Reduction In Heat Development During Cutting Increases Tool Life, Especially In The Case Of Metals. Suitable For Alloyed And Non-Alloyed Steels (Up To 1.000 N/Mm² Strength), High Chromium Alloyed Steels Such As Stainless Steel, Steels Resistant To Rusts And Acids, Non-Ferrous And Light Metals.Specifications:- Ø: 92,0 Mm- Ø (Inch): 3 5/8 Inch- Tube Dimensions: 3 Inch- Materia: Hsse-Co 8- Cutting Direction: Right Hand Cutting- Cutting Depth: 38,0 M…

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.The fine toothing is particularly suitable for cutting metals. It ensures smoot more→her running and reduces the necessary effort. The reduction in heat development during cutting increases tool life, especially in the case of metals. Suitable for alloyed and non-alloyed steels (up to 1.000 N/mm² strength), high chromium alloyed steels such as stainless steel, steels resistant to rusts and acids, non-ferrous and light metals.Specifications:- Ø: 102,0 mm- Ø (inch): 4 inch- Material: HSSE-Co 8- Cutting direction: right hand cutting- Cutting depth: 38,0 mm- Cutting angle: work´s spec…

Hollow Drill Bits Depth 30 Mm. Cbn (Polycrystalline Cubic Boron Nitride) Grinding. For Use In Magnetic Base Drill Presses And Foot Drills With Morse Taper Connection, Using Adapter 108 302 / 108 303. more→Direct Connection To Ruko Rs 10 Type Drills. Suitable For Drilling Steel Beams And Sheets, Cast Steel, Light Metals And Non-Ferrous. Great Cutting Power And Long Life. Presented In A Translucent Plastic Case With Hanger.Specifications:- Ø (Mm): 17 - Ø Stem (Mm): 19- Number Of Teeth: 5

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 18,0 mm- Total length L1: 63,0 mm- Shank Ø 19,0 mm for machines A10 / RU25 / RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm- Weight 0,09800 KG

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 19,0 mm- Total length L1: 63,0 mm- Shank Ø: 19,0 mm- machines: A10 / RU25 / RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm

Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.For use in magnetic-stand and pillar drilling machines wi more→th morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon direct shank such as the RUKO magnetic-stand A10 drill.Specifications: - Ø: 20,0 mm- Total length L1: 63,0 mm- Shank Ø: 19,0 mm- for machines: A10 / RU25 / RU40- Material: HSS- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm- Weight: 0,11200 KG

The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only.On easily cut materials the varied toothing ensures that the cut is more even a more→nd requires less effort. The reduction in vibrations and heat development during cutting achieves up to three times the tool life. Suitable for unalloyed steel (up to 700 N/mm² strength), non-ferrous and light metals, plastics, plasterboard and light building boards, fibreboard, plywood and wood.Specifications:- Ø: 121,0 mm- Ø (inch): 4 3/4 inch- Material: HSS- Cutting direction: right hand cutting- Cutting depth: 38,0 mm- Cutting angle: work´s specification- Weight: 0,49000 KG

Depth 55mm. Cbn Grinding. For Magnetic Base Drill Presses And Foot Drills With Morse Taper Connection, Using Adapter 108 302 / 108 303. (Ruko Drills Rs 20, Rs 30). Suitable For Drilling Beams And Shee more→ts Of Steel, Cast Steel, Light And Non-Ferrous Metals. Great Cutting Power And Long Life. Translucent Plastic Case With Hanger.Specifications: - Ø (Mm): 16- Ø Stem (Mm): 19- Number Of Teeth: 5

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Specifications: - Ø: 22,0 mm- Total length L1: 63,0 mm- Shank Ø: 19,0 mm- For machines :A10 / RU25 / RU40- Material: HSS- Surface: Bright- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm- Weight: 0,11400 Kg

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 24,0 mm- Total length L1: 63,0 mm- Shank: Ø 19,0 mm- for machines: A10 / RU25 / RU40- Material: HSS- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm- Weight: 0,11800 KG

Hollow Drill Bits Depth 30 Mm. Cbn (Polycrystalline Cubic Boron Nitride) Grinding. For Use In Magnetic Base Drill Presses And Foot Drills With Morse Taper Connection, Using Adapter 108 302 / 108 303. more→Direct Connection To Ruko Rs 10 Type Drills. Suitable For Drilling Steel Beams And Sheets, Cast Steel, Light Metals And Non-Ferrous. Great Cutting Power And Long Life. Presented In A Translucent Plastic Case With Hanger.Specifications:- Ø (Mm): 25 - Ø Stem (Mm): 19- Number Of Teeth: 6

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 26,0 mm- Total length L1: 63,0 mm- Shank: Ø 19,0 mm- For machines A10 / RU25 / RU40- Material HSS- Surface Bright- Cutting direction right hand cut- Shank Weldon shank- Cutting depth 30,0 mm- Weight: 0,12200 KG

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drills made of cobalt alloyed heavy-duty high speed steel with increased heat resistance. Ideal for drilling materials that are difficult to cut and for the highest demands. Suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), hot and cold-working steel and also for reinforced and case-hardened steel.Specifications:- Ø: 19,0 mm- Total length L1 63,0 mm- Shank Ø 19,0 mm- For machines: A10 / RU25 / RU40- Mat…

Core Drill Made Of Heavy-Duty High Speed Steel. Suitable For Steel (Such As T-Brackets, Large Sheets), Cast Iron, Non-Ferrous And Light Metals.For Use In Magnetic-Stand And Pillar Drilling Machines Wi more→th Morse Taper Retainer. In Connection With Ruko Arbor Holders No. 108 302 / 108 303, With Ruko Easylock No. 108 312 / 108 313 Or A Weldon Direct Shank Such As The Ruko Magnetic-Stand A10 Drill.Specifications:- Material: Hss- Surface: Bright- Cutting Direction: Right Hand Cut- Shank Weldon: Shank- Cutting: Depth 30,0 Mm- Total Length: L1 63,0 Mm- Shank Ø: 19,0 Mm- For Machines: A10 / Ru25 / Ru40