Taps & Dies Laser Tools

Genuine Laser Tools 3033 7/16" Spare Die

Genuine Laser Tools 3031 5/16" Spare Die

Genuine Laser Tools 3029 3/16" Spare Die

Genuine Laser Tools 3034 1/2" Spare Die

Genuine Laser Tools 3030 1/4" Spare Die

Genuine Laser Tools 3032 3/8" Spare Die

Thread tap chuck type socket with 3/8" drive.Adjustable to fit M4 to M14 thread taps (and equivalent imperial sizes).Also ideal for reamers and screw extractors with square shanks from 5mm up to 8mm a more→cross the flats.Stepped check collets design allows a wider range of square shanks to be covered.

Tap capacity M3-M10 (1/8"-3/8") Knurled adjustment. Length 300mm. 24 teeth Ratchet, forward and reverse. 3/8"D or 17mm wrench /socket or sliding T handle. Matt finish.

Ratchet tap wrench 3-6mm length 90mmRatchet tap wrenchSize range 3-6mmLength 90mmPlated finishHardened jaws (spares available)

Manufactured from Carbon Steel. Tap and die sizes include: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 and M12 x 1.75. Adjustable tap wrench presented in blow mould case for easy sele more→ction.16 pieceManufactured from Carbon SteelTap and die sizes include: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5, M12 x 1.75Adjustable tap wrenchDie wrench

Tap socket set in 3/8"D and 1/4"DMagneticSpecial square sockets for tapsManufactured from Chrome Vanadium4 x 1/4"D sockets: 1mm | 2mm | 3mm | 4mm; 4 x 3/8"D sockets: 5mm | 6mm | 7mm | 8mm. Supplied on more→a socket railIdeal for restricted access situations where you can't use a T-handle tap holder

Ratchet tap wrench 6-12mm length 110mmRatchet tap wrenchSize range 6-12mmLength 110mmPlated finishHardened jaws (spares available)

For use with 3/8"D & 1/4"D ratchets, ideal for restricted access where a T handle tap holder will not reach. For driving rethreading taps from M1.5 to M14 depending on shank square size. Sockets have more→special square profile to fit the tap shanks. 6 x 1/4" drive magnetic sockets: socket number to square size: # 1 (2.8mm), # 2 (3.4mm), #3 (4mm), #3.5 (4.5mm), #4 (4.6mm), #4.5 (5.4mm); length: 32mm. 4 x 3/8" drive magnetic sockets: socket number to square size: #5 (6.4mm), #6 (7.3mm), #7 (7mm), #8 (8.4mm); length: 40mm.

Manufactured from Alloy Steel with Titanium coated finish for extra cutting edge. This neat set comes with 6 metric taps and dies plus T-bar tap wrench for extra leverage. Supplied in a handy pop up d more→isplay case for easy selection. Sizes: 3 x 0.5NC, 4 x 0.7NC, 5 x 0.8NC, 6 x 1.0NC, 8 x 1.25NC, 10 x 1.5NC.Metric.Manufactured from Alloy Steel and Titanium coated.This neat set comes with 6 metric taps and dies plus T-bar.Metric sizes: 3 x 0.5NC, 4 x 0.7NC, 5 x 0.8NC, 6 x 1.0NC, 8 x 1.25NC, 10 x 1.5NC.Comes in a handy pop up display case for easy selection.

Part of the Laser Tools Tap and Die range supplied in blow mould case.A comprehensive accessory set for M3-M12 tapsRatchet wrench with innovative switching functionTap holder M3-M6 and M6-M12Die stock more→and 2 screw pitch gauges (SAE and Metric)Can be used with most taps and dies within its size range

Contents include: 17 Metric Taps, 17 Metric Dies, Tap Wrench, T-Type Tap Wrench, Die Wrench, Screw Pitch Gauge & Screwdriver.Tap and Die Sizes: 3 x 0.5, 3 x 0.6, 4 x 0.7, 4 x 0.75, 5 x 0.8, 5 x 0.9, 6 more→x 1.0, 7 x 1.0, 8 x 1.25, 9 x 1.0, 9 x 1.25, 10 x 1.25, 10 x 1.5, 11 x 1.5, 12 x 1.5, 12 x 1.75, 1/8 28BSP.M3 - M12 Tap Wrench and M3 - M6 T-Type Tap Wrench.25mm diameter Die Wrench.Screw pitch gauge and screwdriver.