Diving Accessories Dive Rite

The stainless steel assembly screws are used for attaching various accessories to a TransPac harness or to a hard backplate (such as lift bag pouches, suit inflation mounting systems and sidemount buttplates).Another common use is to secure the wing to the TransPac harness or hard backplate when rigged for a single tank--When the BCD is taken off a single tank (perhaps to swap tanks between dives), the cam straps alone are not enough to keep the wing neatly attached to the harness.Designed to fit through a 3/8 hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place.Sold as a set of two.

Transpak hose retainer with Dive Rite logo.

Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1 x 2 (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves.Size small (GM2050-5) fits 5.5-inch (127 mm) diameter tanks. Both size retainers come in black only. Made in the U.S.A.Features:- 4-inch wide (10 cm) band made of proprietary, stretch material.- Silicone strips placed inside keep band securely in place.- GM 2050-5 …

Dive Rite Inox Buckle

wing valve,size 16

Protect your exposure suit and pad your shoulders with our basic webbing harness shoulder pads.Neoprene sleeves weave onto any 2-inch webbing harness prior to full assemblyMade in the U.S.A.

Bcd Jackets Accessories And Parts Kit X 10 D-Ring Stainless Steel Low Profile 5Cm.

Diving Weight Systems Buckles Kit X 10 Plastic Quick Release Buckle 2´5Cm.

Preferred by divers who use scooters (DPVs) for extended periods of time due to the added comfort the 2-inch width provides.Used for fastening a harness and backplate securely to a divers body, the 2-inch crotch strap is used to reduce the likelihood of gear slipping upwards on the body in the water, resulting in the tank hitting the back of the head during a dive.Continuous piece of nylon webbing provides strength, yet is soft and wont dig into the body.Includes a neoprene sleeve to protect exposure suit from abrasion.Made in the U.S.A.* Two-inch nylon webbing crotch strap has 2,800 lbs tensile strength and is 42-inches long.* Stainless steel 304 welded scooter ring for attaching scooter leash.…

Keep regulator hoses lying flat and avoid kinking with our Deluxe Hose Retainers. Our wide, 4-inch (10 cm) retainer band is made of a proprietary, stretch material used in bandages. The material holds up to salt water and dries quickly. Silicone strips on the inside of the band grip the tank and keep the Deluxe Hose Retainer from rolling. A 1 x 2 (2.5cm x 5cm) nylon pull tab makes accessing the hose retainer easy, even when using gloves. Size large (GM2050-7) fits 7.25-inch (184 mm) and 8-inch (203 mm) diameter tanks.Features:- 4-inch wide (10 cm) band made of proprietary, stretch material.- Silicone strips placed inside keep band securely in place.- GM 2050-7 large fits tanks from size 7.25-inches …

12´´ corrugated hose for Dive Rite wings.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel Ring Bent 1´25Cm.

Dive Rite cam straps are available in several options. No matter what the application is, Dive Rite has a cam strap that will work for it. All cam straps are sold individually, and are made in the USA.The low-profile, 1.5 inch cam strap (BC2036-1.5) is a popular option for rigging sidemount or stage bottles. Using a low profile marine grade stainless steel roller cam buckle, the 1.5 inch wide strap is 36 inches (91.4cm) in length and is user adjustable to fit cylinders from 5 inches in diameter up to 8 inches (20.3cm) in diameter. Rubber non-slip pad prevents the cylinder from shifting once the cam strap is secured. Excess webbing is secures using hook-and-loop, which will also prevent the

Dive tanks - Straps, backpacks, cylinder bands.DIVE RITE Cam Standard Strap.Dive rite cam strap standard with rubber buckle 5 x 91.4 cm.

Our Right Angle Adapter attaches between the regulator second stage and its low pressure hose, routing the hose down the divers chest and/or under the arm.This increases comfort and streamlining.This low-profile adapter is not an omni-directional swivel and so it maintains its angle and will not allow the regulator to flop around.Placed on a 40-inch primary regulator hose in a single-tank regulator configuration, the Right Angle Adapter allows the hose to route down under the arm and up to the mouth, getting rid of the large hose ´arc´ that protrudes from the tank around the diver and hence, can become easily snagged.Sidemount divers use the Right Angle Adapter to route their hoses down

The Dive Rite Adjustable Bungee System (ABS) allows fast and easy customization to fit any sidemount diver. The bungee cord is weaved through a custom designed, laser cut Delrin plate providing an infinitely adjustable bungee. The bungee will support even the heaviest of steel tanks without slipping thanks to the unique weaving pattern. There are no knots to tie and no tools are required--just loosen the weave at the plate, adjust to the correct length, and re-tighten. Make quick work of fine tuning your sidemount system and easily adjust for different sized tanks or varying thicknesses of exposure protection. They are also ideal for instructors and rental programs that need to quickly size …

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel D-Ring 5Cm.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel D-Ring Bent Low Profile 5Cm.

Diving Weight Systems Accessories Kit X 10 Stainless Steel Serrated Fastener 5Cm.

Bcd Jackets Accessories And Parts Kit X 10 Stainless Steel D-Ring Bent 5Cm.

Our High Flow Angle Adapter attaches between the regulator second stage and its low pressure hose, routing the hose down the diver´s chest and/or under the arm. This increases comfort and streamlining. This low-profile adapter is not an omni-directional swivel and so it maintains its angle and will not allow the regulator to flop around. Placed on a 40-inch primary regulator hose in a single-tank regulator configuration, the High Flow Angled Adapter allows the hose to route down under the arm and up to the mouth, getting rid of the large hose ´´arc´´ that protrudes from the tank around the diver and hence, can become easily snagged. Sidemount divers use the Right Angle Adapter to route their…

The Intermediate Pressure Gauge is used to measure the intermediate pressure of any regulator. Perfect for field diagnostics, this small gauge plugs into any standard low pressure inflator hose. Compact and lightweight, the Intermediate Pressure Gauge fits easily in a tool bag or save-a-dive kit.Features:- Brass mechanism inside a plastic body with a chrome plated brass nipple- Graduated scales in imperial (10 psi increments) and metric units (0.5 kg/cm2 increments)- 1.75″ x 3.5″ (4.45cm x 8.9cm)- 2.6 oz (.07 kg

This versatile pocket holds up to 4lbs of weight, which is ideal for those traveling to warm water destinations or divers who add weight to tanks for trim purposes.With a small footprint of 3 inches x 4 inches (7.6cm x 10cm), you´ll hardly know it´s there.With two mounting options in one pocket, the Travel Weight Pocket is extremely versatile.A 2 inch velcro attachment allows for easy installation or removal.The 2 inch stainless slide can be used for a more permanent attachment.The locking slide attachment is also ideal for use on basic style webbing harnesses, where there is nothing to keep a pocket from sliding around.Sold individually.1680 denier ballistic nylon fabric is tear and abrasion re…

Traditional ´´oval´´ shape preferred by experienced and technical divers.Use with both the ´´Elbow´´ and the ´´RE- Rapid Exhaust´´ assembly systems.Compatible with most 1-inch diameter power inflators and BC Integrated second stages.22´´ lenth.We suggest using the corrugated hose clamp kits to complete your assembly.