Nails, Screws, Fasteners DeWALT

Part of a range of clips, washers and ties that has been specifically designed for a wide veriety of on-site applications including the fixing of cable conduit, lathing, steel brackets and wooden battens. Specifications • Catalogue Number: DDF6755004 • Description: Perfoband x 10 metres • Diameter: 12mm • Fits DCN80: yes

Part of a range of clips, washers and ties that has been specifically designed for a wide veriety of on-site applications including the fixing of cable conduit, lathing, steel brackets and wooden battens. Specifications • Catalogue Number: DDF6755005 • Description: Perfoband x 10 metres • Diameter: 17mm • Fits DCN80: yes

The DeWalt adhesive anchors range offers high performance, stress free fixing into brickwork, block work and concrete Best suited for high load applications, the resulting bond between stud and resin is often stronger than the base material itself. The low expansion and splitting forces when the anchor is prestressed or loaded allow small edge distances and spacings This makes them ideal for close to edge fixing, close spacing and use in concrete of unknown quality or low compressive strength Each DeWalt adhesive anchor is specifically formulated to provide a unique set of properties to suit various applications. Load capacities will depend on base material strength and integrity, stud or rebar …

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX35Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 30mm • Compatible with: DPSX38 • Quantity: 500

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 32mm • Finish: Galvanised • Pack Quantity: 2500

Galvanized brad nails. Specifications • Catalogue Number: DNBT1815GZ • Description: Galvanized 18 Gauge brad nails • Diameter: 1.25mm • Length: 15mm • Finish: Galvanized • Quantity: Box of 5000 • Compatible with: DPN1850, DC608

Galvanized brad nails. Specifications • Catalogue Number: DNBT1820GZ • Description: Galvanized 18 Gauge brad nails • Diameter: 1.25mm • Length: 20mm • Finish: Galvanized • Quantity: Box of 5000 • Compatible with: DPN1850, DC608

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX35Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 35mm • Compatible with: DPSX38 • Quantity: 500

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX12Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 12mm • Compatible with: DPSX38 • Quantity: 500

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 38mm • Finish: Galvanised • Pack Quantity: 2500

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX15Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 15mm • Compatible with: DPSX38 • Quantity: 500

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX19Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 19mm • Compatible with: DPSX38 • Quantity: 500

Galvanized brad nails. Specifications • Catalogue Number: DNTB1825GZ • Description: Galvanized 18 Gauge brad nails • Diameter: 1.25mm • Length: 25mm • Finish: Galvanized • Quantity: Box of 5000 • Compatible with: DPN1850, DC608

Dewalt DRS18100 Insulated Crown Cable Staples For DCN701 25mm (Pack Of 540)  The Dewalt DRS18100 staples are designed to be used in conjunction with the DCN701 for fastening low voltage wires. They are plastic insulated and extremely user-friendly as they can also be manually driven with a hammer into tight, hard to reach areas. Features:
- Designed for use in the Dewalt DCN701 cordless cable stapler
- They are UL listed (406A) for common Romex (NM Sheathed Cable), and MC (Metal Clad) cable applications
- The staple crown is plastic insulated and they adhere to the National Electrical Code
- Can also be driven manually using a hammer for tight space applications
- Also suitable for u…

The AC100-PRO is a two-component vinylester adhesive anchor and is approved for almost all applications and base materials. It provides consistent performance in uncracked and cracked concrete with a wide range of hole diameters and embedment depths as well as flexible fixture thicknesses and a simple installation process. The AC100-PRO is approved for a temperature range of up to 120°C and can even be used in water filled holes. It also provides a fast curing time and high load capacity making it the ideal adhesive anchor for use on-site. Features & Benefits • ETAG 001 approved (ETA Option 1) for use in cracked and uncracked concrete • Approved for water filled drill holes (Option …

The AC100-PRO is a two-component vinylester adhesive anchor and is approved for almost all applications and base materials. It provides consistent performance in uncracked and cracked concrete with a wide range of hole diameters and embedment depths as well as flexible fixture thicknesses and a simple installation process. The AC100-PRO is approved for a temperature range of up to 120°C and can even be used in water filled holes. It also provides a fast curing time and high load capacity making it the ideal adhesive anchor for use on-site. Features & Benefits • ETAG 001 approved (ETA Option 1) for use in cracked and uncracked concrete • Approved for water filled drill holes (Option …

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 45mm • Finish: Galvanised • Pack Quantity: 2500

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX22Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 22mm • Compatible with: DPSX38 • Quantity: 500

Galvanized brad nails. Specifications • Catalogue Number: DNBT1830GZ • Description: Galvanized 18 Gauge Brad Nails • Diameter: 1.25mm • Length: 30mm • Finish: Galvanized • Quantity: Box of 5000 • Compatible with: DPN1850, DC608

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 50mm • Finish: Galvanised • Pack Quantity: 2500

Galvanised narrow crown finishing staples. Specifications • Catalogue Number: DSTSX25Z • Description: Galvanised SX Staple • Staple Crown Width: 5.6mm • Length: 25mm • Compatible with: DPSX38 • Quantity: 500

These DeWalt 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Features & Benefits • Suitable for a wide range of applications • Made from inspected high-quality steel • Galvanised nails reduce the likelihood of rust or staining Specifications • Size: 57mm • Finish: Galvanised • Pack Quantity: 2500

Galvanized brad nails. Specifications • Catalogue Number: DNBT1835GZ • Description: Galvanized 18 Gauge Brad Nails • Diameter: 1.25mm • Length: 35mm • Finish: Galvanized • Quantity: Box of 5000 • Compatible with: DPN1850, DC608

The Dewalt DNBA1638-GZ Brad Finish Nails are nails you can rely onThe DEWALT 16 Gauge Galvanised 20° Finish Nails have been designed for use with the DEWALT 16 gauge nailers, ensuring fewer jamming or fitment issues. Features:  
- Contains 2500 angle brad nails  
- High-quality steel to ensure reliability in performance 
- Galvanised Second Fix Nails reduce the likelihood of rust or staining Specification:  
- Weight: 1.5kg
- Length: 38mm 
- Finish: Galvanised
- Gauge: 1.6 (16GA)
- Box Quantity: 2500 
- Type: 20° Angled Nails