Derailleurs Shimano

For a transmission that lasts, it's not much, but new rollers will prevent rattles and give you a better shift.Details :Specific mounting direction up and down.Compatible transmissions Shimano 10 speeds

For a transmission that lasts, it's not much, but new rollers will prevent noise and give you a better gear shift. Specific mounting direction up and down

Shimano Dura-Ace R9100 Rear Mech Outer Cable Housing 240mm The pleasure of using a well set up mechanical gear shifting system is not to be underestimated, and using the Dura-Ace R9100 Rear Mech Outer Cable Housing from Shimano is a large step towards achieving the perfect shift. 240mm in length, the housing is polymer lined and lubricated with low friction silicone grease to help make every shift accurate and light. For use with 1.2mm polymer-coated inner cable.

Gear shift cable set Shimano Optislick

Original roller of the brand Shimano, for assembly on derailleur SHIMANO 105 11 Speeds. The derailleur rollers ensure the tension and the guidance of the chain during the passage of your speeds. The roller and also called "Puley" It ensures the displacement of your chain, while the lower one named "String" its role and that in charge of the tension of the chain. In order to have a good precision and an optimal fluidity, the derailleur rollers must always be in good condition. They will be compatible with the rear derailleur range SHIMANO 105 R7000Technical characteristics of the roller kit Shimano 105 RD-R7000 Speeds :Type of use: RoadCompatible derailleur: RD-R7000-GS, RD-R7000-SSCompatible …

Derailleur pulleyorigine from Shimano, to be mounted on derailleur SHIMANO 105 11 Speeds. The derailleur rollers ensure the tension and the guidance of the chain during the passage of your speeds. The roller and also called "Puley" It ensures the movement of your chain, while the bottom named "String" its role and this responsible for the tension of the chain. In order to have a good precision and an optimal fluidity, the derailleur rollers must always be in good condition. They will be compatible with the rear derailleur ranges SHIMANO 105 R7000, SHIMANO 105 5800, SLX M7000, DEORE M6000, METREA U5000. Technical characteristics of the roller kit Shimano 105 RD-5800 11 Speeds: Type of use: RoadDerailleur …

Derailleur pulleyorigine from Shimano, for derailleur SHIMANO Deore/SLX 12 speeds. The derailleur rollers ensure the tension and the guidance of the chain during the passage of your speeds. The roller and also called "Puley" It ensures the movement of your chain, while the bottom one named "String" its role and that in charge of the tension of the chain. In order to have a good precision and an optimal fluidity, the derailleur rollers must always be in good condition. They will be compatible with the ranges of rear derailleurs SLX M7100, DEORE M6100.Technical characteristics of the roller kit Shimano Deore XT RD-M8100/M8120 12 Speeds:Type of use: RoadCompatible derailleur: RD-M7100-SGS, RD-M7120-SGS,…

Stainless steel gear shift cables and sleeves, end caps 4 pieces, SIS-SP40 waterproof end cap, waterproof end cap for rear derailleur, cable end caps 2 pieces Shimano SIS-OT-SP41

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

Cogs Shimano RD-6700 compatible rear derailleur Ultegra / XT /Saint.Details :Part Number: 468GFeatures:Reference Y5X998150 Speed 10

##Shimano EW-SD50 E-tube Di2 Electric Wire 150mm This EW-SD50 Di2 cable for Shimano E-tube is a genuine replacement part. 150mm in length, the cable will not require any cutting to fit. The connectors are reliable and water resistant for uninterrupted riding.

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

・Transmits interactive signals and power to each electronic component through plug & play connection ・Compact and waterproof connector ・Easy to insert into the frame ・Cable length 150 mm - 1,600 mm ・With cable clamp for integrated type cable passage (EW-SD50-I)

Shimano EW-SD50 E-tube Di2 Electric Wire The EW-SD50 E-tube Di2 Electric Wire is part of Shimano's electronic gear configuration that allows the removal of traditional mechanical cables in favour of electrical wires. This electronic format eliminates poor shifting caused by contaminants, corrosion, and stretching and provides effortless gear shifts. The latest Di2 gear systems use a fully removable individual cable system from the battery indicator junction box enabling fine-tuning with the correct cable length to each component for easy and tidy fitment. EW-SD50 wires are required to connect either the SM-JC40 external junction or the SM-JC41 internal junction to the rear mech, front mech,…

The Shimano SM-AD91MS front derailleur clamp is the ultimate part for demanding cyclists looking for performance and reliability. Manufactured by one of the most respected brands in the cycling industry, Shimano, this front derailleur clamp is specially designed to fit the Dura Ace range from Shimano. With its high-quality design and compatibility with Shimano drivetrains, this front derailleur clamp offers optimum performance, whatever the situation. Whether you're a professional cyclist taking part in intense competitions or a passionate amateur who just likes to ride, this front derailleur clamp will enable you to benefit from smooth, precise shifting. The Shimano SM-AD91MS front derailleur …

Shimano EW-JC302 SD300 2 Port Junction The EW-JC302 2 Port Junction connects EW-SD300 wires in any Shimano electronic Di2 setup. It sits neatly inside the frame and is extremely reliable with water-resistant connectors.

Power supply cable SHIMANO Di2EW-SD50.waterproof plug.transmits the interactive signals and supplies power to all the elements.

・Transmits interactive signals and power to each electronic component through plug & play connection ・Compact and waterproof connector ・Easy to insert into the frame ・Cable length 150 mm - 1,600 mm ・With cable clamp for integrated type cable passage (EW-SD50-I)

Compatible black connection cable Details :EW-SD50 External Passage Compatible CableIEWSD50L25 : 250mm Black EW-SD50 E-Tube For DI2IEWSD50L50 : 500mm Black EW-SD50 E-Tube For DI2IEWSD50L60 : 600mm Black EW-SD50 E-Tube For DI2IEWSD50L70 : 700mm Black EW-SD50 E-Tube For DI2IEWSD50L80 : 800mm Black EW-SD50 E-Tube For DI2IEWSD50L100 : 1000mm Black EW-SD50 E-Tube For DI2IEWSD50L120 : 1200mm Black EW-SD50 E-Tube For DI2SpecificationsPart number 2090318505 Length 1200 mm

・Transmits interactive signals and power to each electronic component through plug & play connection ・Compact and waterproof connector ・Easy to insert into the frame ・Cable length 150 mm - 1,600 mm ・With cable clamp for integrated type cable passage (EW-SD50-I)

Gear Cable Set / Derailleur / Compatible with Shimano / Plastic / Length 120 cm / Waterproof Plug

Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm A Shimano EW-SD50 E-tube Di2 Electric Wire 1000mm is required to connect the junction (either SM-JC40 external or SM-JC41 internal) to the rear mech, front mech, battery and to the handlebar battery indicator junction box. Reliable and secure water-resistant connectors. Please note: EW-SD50 individual wires are available in varying lengths, there is no need (or facility) to cut these cables.

・Transmits interactive signals and power to each electronic component through plug & play connection ・Compact and waterproof connector ・Easy to insert into the frame ・Cable length 150 mm - 1,600 mm ・With cable clamp for integrated type cable passage (EW-SD50-I)

・The more compact design makes the new electrical components smaller and lighter ・Potentially extending the future capabilities of Di2 systems