Pedals Garmin

Android Watch / 1.2 inch Display Size / GPS / Unisex / iOS Compatible / Android Compatible / Plastic

Garmin Rally RS100 Single Sided Power Meter Pedals (Shimano Cleats) Following a meticulous design phase and rigorous real-world testing, the Garmin Rally RS100 Single Sided Power Meter Pedals (Shimano Cleats) realise exceptional durability, accuracy and versatility, helping the dedicated rider train and race with greater effectiveness. Simple to install and swap between bikes, just as standard pedals are, the power measurement is easily calibrated via a connected bike computer or watch, granting reliable readings instantly. The power measurement instruments are sealed from the elements inside the left pedal spindle, and these measure the watts and cadence produced by the rider's left leg. …

Battery type: LR44/SR44 (x4) or CR1/3N (x2)Battery life: up to 120 hoursMaximum rider weight: 105 kgAccuracy: +/- 1Sensor calibrationAdjustable voltageMeasurement: on axisConnectivity: ANT+® and Bluetooth® Battery type: LR44/SR6Battery type: LR44/SR44 (x4)Battery life: up to 120 hours (with LR44 type battery)Weight: 451 gWaterproof: IXP7Maximum rider weight: 105 kgAccuracy: +/- 1.0Cleat type: SHIMANO SPDQ Factor: 53 mm (55 mm with 2 mm washer included)Distance from center of pedal axle to bottom surface of shoe: 13.5 mmSensor calibrationAdjustable voltageGarmin ConnectMeasurement: on axleConnectivity: ANT+® and Bluetooth®

Garmin Rally XC200 Double Sided Power Meter Pedals (Shimano SPD Cleats) Meticulously designed and then rigorously tested in the most demanding outdoor riding conditions, the Garmin Rally XC200 Double Sided Power Meter Pedals (Shimano SPD Cleats) deliver accuracy, durability and versatility to dedicated gravel, mountain bike and cyclocross riders. Garmin XC200 Highlights These power meter pedals have a simple setup procedure that includes standard installation onto the cranks and easy calibration. This easy installation allows for quick swapping between bikes without risking the precision of the power readings. The power measurement instruments are sealed inside the pedal spindles to grant …

Don't let pedal problems keep you from training.If you need to replace your left pedal body, simply use this replacement and get back on the road.Since there are no complex transmissions or wheel compromises and no external sensors to install with the Rally RS pedals, the pedal body is super easy to install without the help of a bike store.

Garmin Rally RK Pedal Body Conversion Kit (Look Keo Cleats) The Garmin Rally RK Pedal Body Conversion Kit can be easily installed onto Garmin Rally power meter pedal spindles and are compatible with Look Keo style cleats. They can be quickly installed using standard workshop tools, allowing the rider to replace their existing pedal bodies due to damage or a change of pedal platform preference. Includes 1 x Garmin Rally RK left pedal body 1 x Garmin Rally RK right pedal body 1 x pair of Garmin RK Look Keo style cleats and fixings ##VIMEO:759497455:560:315##

Garmin Rally XC Pedal Body Conversion Kit (Shimano SPD Cleats) The Garmin Rally XC Pedal Body Conversion Kit comprises left and right pedal bodies that install onto Garmin Rally power meter spindles. Installation is quick and easy and can be carried out with standard workshop tools. They are compatible with Shimano SPD off-road style cleats and are ideal for refreshing old, worn pedals or converting existing Rally road pedals for off-road riding. Includes 1 x Garmin Rally XC left pedal body compatible with Shimano SPD off-road cleats 1 x Garmin Rally XC right pedal body compatible with Shimano SPD off-road cleats 1 x pair of Garmin XC Shimano SPD off-road style cleats and fixings ##VIMEO:759497455:560:315##…

Garmin Rally RK100 Upgrade Pedal (Look Keo Cleats) The Garmin Rally RK100 Upgrade that is compatible with Look Keo cleats is a right side power measurement pedal that converts single-sided Rally RK100 power meter pedals into a dual-sided system. It seamlessly pairs with the existing left master power pedal to enable total power, cadence, left/right power balance and seated versus standing power to be accurately measured to within +/- 1%. Upgrading to a dual-sided system also means that platform centre offset and power phase metrics can be tracked, enabling the rider to make bike fit adjustments in line with personal biomechanics. Either 2 x LR44/SR44 batteries or 1 x CR1/3N battery power the …

Battery type: LR44/SR44 (x4) or CR1/3N (x2)Battery life: up to 120 hoursMaximum rider weight: 105 kgAccuracy: +/- 1Sensor calibrationAdjustable voltageMeasurement: on axisConnectivity: ANT+® and Bluetooth® Weight: 334 gWeight: 334 gWaterproof: IXP7Cleat type: KEOQ Factor: 53 mm (55 mm with the included 2 mm washer)Distance from center of pedal axle to bottom surface of shoe: 12.2 mm

Garmin Rally RS100 Upgrade Pedal (Shimano SPD SL Cleats) Converting existing, single-sided Garmin RS100 pedal systems to a dual-sided power meter, the Garmin Rally RS100 Upgrade right-sided power pedal, compatible with Shimano SPD SL Cleats, opens up a whole host of extra metrics to the dedicated road cyclist. Seamlessly pairing with the left-sided master pedal, this upgrade pedal allows total power, cadence, right/left balance, and seated versus standing power to be accurately measured within 1%. It also allows the possibility to track platform centre offset and power phase metrics, helping the rider dissect any bike fit or overuse injury issues. The power measurement electronics sealed …

Garmin Rally XC100 Upgrade Pedal (Shimano SPD Cleats) The Garmin Rally XC100 Upgrade Pedal, compatible with Shimano SPD cleats, is a right-sided power pedal that seamlessly pairs with the left master pedal of existing Rally XC100 systems, to create a dual-sided power meter. Linking this upgrade pedal to the existing master pedal allows total power, cadence, left/right balance and seated versus standing power to be measured within an accuracy of 1%. The dual-sided system also means that platform centre offset and power phase metrics can be tracked, helping the rider diagnose physical imbalances and bike fit issues. 2 x LR44/SR44 batteries or 1 x CR1/3N battery give up to 120 hours of use to…

Garmin Rally RS200 Double Sided Power Meter Pedals (Shimano Cleats) The Garmin Rally RS200 Double Sided Power Meter Pedals (Shimano Cleats) have been realised via a remarkably rigorous and meticulous design and testing regime, resulting in the durability, versatility and accuracy required by the most dedicated cyclists. Installation is the same as standard pedals, allowing for quick swapping between bikes, and the calibration procedure is quick and easy via the paired bike computer or watch, giving accurate measurements immediately.  The power measurement instruments are completely sealed from the elements inside the pedal spindles to afford actual dual-sided readings. These spindles measure t…

Garmin B Rally RK200 00