Toolkits Park

The BBT-19.2 is used to remove and install external bearing crankset bottom brackets. Fits external bearing bottom brackets with 16 external notches and an outside diameter of approximately 44mm.Features:- 16-notch 44mm OD cupsFits:- Shimano® BB80, BB5700, XT® BB70, BB51, and previous external bearing threaded cups- External threaded types for Campagnolo®, Chris King®, FSA® MegaExo®, SRAM®/Truvativ® GXP®, Race Face® X-type, Surly®, Wheels®, Fulcrum®, Hope™ (non-BSA30) and others- 16-notch Bafang® BBSH, BBS02 Mid Drive motor lockrings

Shop quality hex wrenches with a ball end on the long arm (exc. 10mm) for hard to reach bolts and a straight end on the short arm for high torque applications.Features:- Includes 1.5, 2, 2.5, 3, 4, 5, 6, 8, and 10 mm sizes- Wrench tips are precision chamfered for a clean, tight fit- Made from through-hardened industrial quality steel

To Alleviate Poor Shifting And Uneven Drive Train Wear, Manufacturers Recommend Chain Replacement Before Rear Cog Replacement. Now You Can Quickly And Accurately Determine The Wear And Stretch Of Any Chain With The Park Tool Chain Checker. Simply Insert The Chain Checker'S Pins Into Two Links, Lightly Press The Swing Arm Gauge, And Then Check The Gauge Window For An Accurate Reading The Cc-2 Is Compatible With Most Single-Speed And Derailleur Chains. For 9 And 10-Speed Chains, Replace Chain At Or Just Before The 0.75% Reading. For 11 And 12-Speed Chain, Replace At Or Just Before The 0.5% Reading. For Single-Speed Chains, Replace Chain At Or Just Before The 1% Reading. Check With Manufacturer …

Capable of fitting 16-notch threaded bottom brackets with a major diameter (outside of notches) of 39-40mm and a minor diameter (inside of notches) of 37.6mm, including: -Shimano® XTR® BB93Specifications:- For 3/8 head wrenches- Shimano®- Dura -Ace® BB9000- Token®Also fits chainring locks for Shimano® STEPS square drive motors, models:- E6000- E6002- E6050

The PW-4 Professional Pedal Wrench is designed for heavy shop use. An oversized, asymmetrical head is made from Cro-Moly steel for superior strength and durability. While strong, the PW-4 is thin enough to access all wrench flats.Features:- Two 15mm wrench openings at 30 degree and 45 degree angles for best mechanical advantage, regardless of pedal position- Round vinyl dipped handle won't dig into the hand like flat wrenches- Extra long 14´´ handle provides the leverage to remove even the tightest pedals

The SBS-1.2 is a shop quality set of sockets, hex bits and Torx® compatible bits, selected specifically for common bike repair needs. Ideal for use with Park Tool Torque Wrenches, the SBS-1.2 3/8´´ drive bits and sockets are made from tough, chrome vanadium steel for lasting durability.Includes:- 3, 4, 5, 6, and 8mm hex bits- Long reach 5, 6 and 10mm hex bits- Long reach T25, T30 and T40 Torx® compatible bits- 8, 9, 10, 13, 14, 15mm and 1´´ sockets (The 1´´ socket fits various Park Tool Freewheel, Cassette Lockring, and Bottom Bracket tools)- All sockets and bits are 3/8´´ drive

The Cn-10 Cable And Housing Cutter Is A Shop Quality Cutter Designed Specifically For Use On All Bicycle Cables And Housing, Including Hard-To-Cut Index Housing.Cn-10 Features:- Cold Forged, Heat Treated Steel Handles For Strength- Precision Ground Cutting Jaws For A Clean Cut On Every Cable- Built In Crimper For Cable End Caps And Forming Hole For Reforming Housing Ends And Housing Ferrules- Wire Latch Holds Handles Together When Not In Use

A Great Shop Accessory Made To Hold A Wide Variety Of Axles, Spindles And Any Park Tool Freewheel Remover/Lockring Tool. Made From Precision Extruded Aluminum.Av-5 Features:- Top Retainer Legs And Magnets Hold The Inserts Securely In Place During Bench Vise Use- 5, 9, 10, 12, 14, 20, 25, 30, And 36mm Jaw Openings- Includes Jaw Opening For Safely Holding Hydraulic Tubing- Mini V-Block- 1´´ Hex, Compatible With Park Tool Freewheel Removers (Fr-1, Fr-2, Etc.)- 5 In. (127mm) Wide

A set of three unique, multi-purpose picks ideal for a wide variety of detail work.Features:- Aluminum handle with magnet- Picks are replaceable, cold formed, heat treated and polished high carbon steel.- Set includes 1-straight, 1-hook and 1-90 degree pick

Engineered for fit, function, and leverage, these L-shaped shop quality hex wrenches are a must have for every workshop.Features:- High-torque, industrial steel wrenches- Straight hex shaft on the short side, ball end on the long side- Comfortable, ergonomically designed nylon handles fit perfectly in your hand- Durable wall/pegboard mount tool holder allows easy access and organizationSpecifications:- Includes 2, 2.5, 3, 4, 5, 6, 8, and 10mm