Cooling Systems Accessories Aqua Computer

Aqua computer is one of the specialists among the manufacturers of high-quality water cooling systems and offers a wide range of own development and at the same time modifies the products of other manufacturers in order to perfectly match them with the requirements in the water cooling segment. High quality with German production, elegant design and high degree of innovation are the main requirements. For example , aqua computer offers a black connection cable for connecting the Splitty4's RGB LED hub to a corresponding 4-pin RGBpx-compatible device. The cable is 10 cm long. Technical details:- Length: 10 cm- Colour: Black- Connection: 4 Pin RGBpx- Compatibility: aqua computer Splitty4

Splitty9 is a universal ninefold splitter and can be used for 3-pin fans, 4-pin PWM fans or as an aquabus splitter. When used with a fan output, the white connector marked with the word "input" is connected to a fan output using the supplied cable. Power supply and PWM signal (if available) are provided to all nine black connectors, additionally the speed signal received from the connector marked "rpm" is forwarded to the fan output.When used as aquabus splitter, the white connector marked with the word "input" is connected to the aquabus connector of an aquaero using the supplied cable. By setting the jumper to the "aquabus" position, all four aquabus signal lines are forwarded to all black …

This temperature sensor has a G1 / 4 thread and can be used with any hoses with suitable connectors. The sensor has a 60cm connection cable and a two-pin plug. • Connection thread: G1/4"• Nickel-plated brass body• Delrin seal• Compatible with:-Aquaero 3.07,-Aquaero 4:00-Aquastream Ultra XT-Aquaduct variants with external sensor input (360 XT, 720 XT)-Sensor inputs of various motherboards

This temperature sensor has one G1 / 4 internal and external thread and is extremely space-saving, as it can be mounted directly on a CPU cooler or a radiator. The sensor has a 60cm connection cable and a two-pin plug.Specifications:• Connection thread G1 / 4• Nickel-plated brass body• Delrin seal• Compatible with:-Aquaero 3.07, aquaero 4:00-Aquastream Ultra XT-Aquaduct variants with external sensor input (360 XT, 720 XT)-Various motherboards with sensor inputs

Mounted on an aquaero 6 controller, this passive heat sink improves heat dissipation and thereby increases the maximum power output of the fan channels. For optional active cooling, the aquaero 5 water block (art. no. 53093) can be installed on top of the passive heat sink. Passive heat sink and Real Time Clock module (art. no. 53127) can be installed simultaneously, additional mounting material is included in delivery of the passive heat sink. Scope of delivery:Aluminum heat sink for aquaero 6Thermally conductive padMounting materialCompatible with:aquaero 6 PRO (53145)aquaero 6 XT (53146)Please note: aquaero 6 and water block are not included in delivery! If using the water block that has …

The ULTITOP D5 is a very compact pump adapter for D5 pumps from aqua computer. It is made of very resistant acetal . During the development of the ULTITOP D5 , care was taken to ensure optimum flow behavior with this pump adapter . The mounting bracket provided with decouplers made of silicone prevents the transmission of vibrations to the housing. The result is a very quiet operation. The ULTITOP D5 is shipped from the factory with an anodized aluminum mounting ring and a matching gasket. A D5 pump is not included and must be purchased separately. Stainless steel plates with matching threads are inserted into the decouplers for assembly. With the help of a single screw, the bracket can be detached …

The QUADRO is an innovative four-channel RGB controller for controlling LED strips of RGBpx series of Aqua computer and also a PWM controller for also four fans . In addition, four temperature sensors can be connected . The QUADRO is connected via USB 2.0 header to a correspondingly equipped motherboard. The configuration then takes place via the aquasuite software.Features- Programmable four-channel fan control- Four fan outputs with up to 25 watts per channel and speed monitoring- All fan outputs with 4-pin plug and PWM signal adjustable- Four temperature sensor inputs- RGBpx LED output for LED strips and fans with individually addressable LEDs- USB 2.0 interface- Aquabus interfaceControl …

- Compensation tank from aqua computer with a capacity of 110 ml- Made of durable borosilicate glass and acetal- With removable stainless steel filter in the base- Mounting hardware included for wall and floor mountingThe features of the ULTITUBE D5 50 reservoir in detailThe ULTITUBE 50 reservoir from aqua computer is equipped with a borosilicate glass tube . In contrast to the frequently used plexiglass, borosilicate glass is very hard and scratch-resistant . It also has excellent chemical and thermal resistance and only expands very slightly when heated.Both ends of the glass tube are firmly connected to metal rings made of black anodized aluminum that do not come into contact with the cooling …

Expansion tank with 230 ml capacity from aqua computer. The reservoir is compatible with D5 pumps from different manufacturers and made of resistant borosilicate glass and offers many well thought-out features. With the universal mounting bracket, the reservoir can be mounted vertically and horizontally.The features of the ULTITUBE D5 100 expansion tank for D5 pumps at a glance:- Expansion tank from aqua computer with 230 ml capacity- For D5 pumps from all manufacturers- Resistant borosilicate glass and acetal- Removable stainless steel filter in the base- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 100 expansion tank for D5 pumps in detailThe …

Expansion tank with 230 ml capacity from aqua computer. The reservoir is compatible with D5 pumps from different manufacturers and made of resistant borosilicate glass and offers many well thought-out features. With the universal mounting bracket, the reservoir can be mounted vertically or horizontally.The features of the ULTITUBE D5 100 PRO reservoir for D5 pumps at a glance:- Expansion tank from aqua computer with 230 ml capacity- For D5 pumps from all manufacturers- Resistant borosilicate glass and acetal- Removable stainless steel filter in the base- Integrated pressure compensation membrane in the lid- RGB LED lighting through RGBpx ring- Fastening material for vertical and horizontal mounting …

Aqua Computer is one of the specialists among the manufacturers of high-quality water cooling systems and offers an extensive assortment of its own development and at the same time modifies the products of other manufacturers in order to perfectly match them with the requirements in the water cooling segment. High quality with German manufacturing, elegant design and a high degree of innovation are essential requirements.Features:- Optimized Laing D5 ball motor for optimum smoothness- Detachable control unit for easy access to the connections- Integrated OLED display and control buttons for direct operation- PWM fan and RGBpx slots- SATA power connector and USB 2.0 interface for softwarePowerful …

The aquaero is an absolutely autonomous working microprocessor-controlled device with USB 2.0 interface. All speed parameters and sensor values can be set and visualized in an user-friendly menu or through an even easier to use PC-software. The key features of the aquaero 6 include:· Programmable four channel fan controller· USB 2.0 and aquabus interface· Four fan outputs with up to 30 Watt of power per channel· All fan outputs with 4-Pin plug, switchable between voltage and PWM control· Versatile control options· Eight temperature sensor inputs· Flow sensor input· Three LED outputs· Potential-free switch· Two additional power outputs· Extensive alarm options· Acoustical alarm· Speed signal …

LEAKSHIELD actively prevents leaks and continuously monitors the coolant loop for even very small leaks. Designed specifically for reservoirs of the ULTITUBE series, LEAKSHIELD replaces the top lid of the reservoir. In addition to leak prevention, LEAKSHIELD can check the system for leaks even before filling the system, enable easy filling by a suction line, as well as monitor the fill level of the reservoir.Leak preventionLEAKSHIELD generates a negative pressure in the whole coolant loop, therefore in case of a leak, coolant cannot exit the system, but ambient air is sucked into the system. In order to ensure that there is a negative pressure everywhere in the system, the amount of negative …

Expansion tank with 350 milliliter capacity from aqua computer. The reservoir comes with a D5 PWM pump and is made of resistant borosilicate glass. With the universal mounting bracket, the reservoir combo can be mounted on the vertically as well as horizontally.The features of the ULTITUBE D5 100 expansion tank with D5 PWM pump at a glance:- Expansion tank from aqua computer with a capacity of 230 ml- D5 PWM pump included- Made of resistant borosilicate glass and acetal- With removable stainless steel filter in the base- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 100 expansion tank with D5 PWM pump in detailThe ULTITUBE D5 100 expansion tank …

Expansion tank with 350 milliliter capacity from aqua computer. The reservoir comes with a D5 PWM pump and is made of resistant borosilicate glass. With the universal mounting bracket, the reservoir combo can be mounted on the vertically as well as horizontally.The features of the ULTITUBE D5 150 expansion tank with D5 PWM pump at a glance:- Expansion tank from aqua computer with a capacity of 350 ml- D5 PWM pump included- Made of resistant borosilicate glass and acetal- With removable stainless steel filter in the base- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 150 expansion tank with D5 PWM pump in detailThe ULTITUBE D5 150 expansion tank …

Expansion tank with 470 milliliter capacity from aqua computer. The reservoir comes with a D5 PWM pump and is made of resistant borosilicate glass. With the universal mounting bracket, the reservoir combo can be mounted on the vertically as well as horizontally.The features of the ULTITUBE D5 200 expansion tank with D5 PWM pump at a glance:- Expansion tank from aqua computer with a capacity of 470 ml- D5 PWM pump included- Made of resistant borosilicate glass and acetal- With removable stainless steel filter in the base- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 200 expansion tank with D5 PWM pump in detailThe ULTITUBE D5 200 expansion tank …

Expansion tank with 350 milliliter capacity from aqua computer. The reservoir comes with a D5-NEXT pump and is made of resistant borosilicate glass. With the universal mounting bracket, the reservoir can be mounted vertically and horizontally.The features of the ULTITUBE D5 150 PRO reservoir with D5-NEXT pump at a glance:- Expansion tank from aqua computer with 350 ml capacity- D5-NEXT pump included- Made of resistant borosilicate glass and acetal- Removable stainless steel filter in the base- Integrated pressure compensation membrane in the lid- RGB LED lighting through RGBpx ring- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 150 PRO reservoir …

Expansion tank with 470 milliliter capacity from aqua computer. The reservoir comes with a D5-NEXT pump and is made of resistant borosilicate glass. With the universal mounting bracket, the reservoir can be mounted vertically and horizontally.The features of the ULTITUBE D5 200 PRO reservoir with D5-NEXT pump at a glance:- Expansion tank from aqua computer with 470 ml capacity- D5-NEXT pump included- Made of resistant borosilicate glass and acetal- Removable stainless steel filter in the base- Integrated pressure compensation membrane in the lid- RGB LED lighting through RGBpx ring- Fastening material for vertical and horizontal mounting includedThe features of the ULTITUBE D5 200 PRO reservoir …

All reservoirs of the ULTITUBE series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremely hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Black anodized aluminum rings are securely bonded to both ends of the glass tube, and the rings do not get into contact with the coolant. Base and lid of the ULTITUBE series reservoirs are made from resilient acetal and screwed to the glass tube. After unscrewing the lid, a large opening ensures easy filling.At the bottom of the …

All reservoirs of the ULTITUBE series are equipped with a borosilicate glass tube. In contrast to acrylic glass, which is often used for tube reservoirs, borosilicate glass is extremely hard and scratch-resistant, features superb thermal and chemical resistance and a very low thermal expansion. The glass tube has an outer diameter of 65 mm and a wall thickness of 5 mm. Black anodized aluminum rings are securely bonded to both ends of the glass tube, and the rings do not get into contact with the coolant. Base and lid of the ULTITUBE series reservoirs are made from resilient acetal and screwed to the glass tube. After unscrewing the lid, a large opening ensures easy filling.At the bottom of the …

ULTITUBE D5 200 PRO LEAKSHIELD reservoir - Expansion tank from aqua computer with a capacity of 470 ml - Made of durable borosilicate glass and acetal - With removable stainless steel filter in the base - LEAKSHIELD protects your system from leaks - A powerful D5-NEXT pump with OLED display fuels your water cooling - With RGB LED lighting through RGBpx ring - Mounting hardware included for wall and floor mounting The ULTITUBE D5 200 PRO LEAKSHIELD reservoir in detail A reservoir that protects your system. Thanks to its negative pressure, the ULTITUBE D5 200 PRO with LEAKSHIELD ensures that no liquid from your water cooling system drips onto your hardware. It also continuously monitors the …