Cooling Systems Accessories Barrow

Essential tool for Water cooling enthusiastsThis 24-pin jumper from Barrow is a must-have for all water cooling fans who care about the safety of their system. Once your custom loop has been assembled, your system still needs to be filled. For this, the pump requires power from the power supply unit. For safety reasons, the rest of your system should remain free of power.In order not to have to start the whole computer, you simply disconnect your mainboard from the power supply. The bridging plug from Barrow now comes on the connection of the power supply. If you now connect the pump to the power pack and press the power switch, your power pack will supply the pump with power. This is how you …

Finding the right place in the housing for the expansion tank (AGB) is complicated. Barrow offers you the option of using this bracket to attach a pump or reservoir directly to a 140 fan slot on a radiator. The bracket is mounted on the radiator and thus lies flat on top. For the AGB or the pump there are holes with a distance of 50 mm on the top.Technical details:- Dimensions: 140,6 x 1,5 x 140,6 mm (B x H x T)- Color: Black- Material: Stahl- Hole spacing (fan slot): 125 mm- Hole spacing (pump, AGB): 50 mmCompatibility:- 140mm fans- 140mm wide radiators

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 12 mm and an inner diameter of 8 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 12mm- Inner Diameter: 8mm- Length: 500 mm- Compatibility: Connections with 12 mm outside diameter

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 16 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 16 mm outer diameter (OD)

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 16 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color whiteConnections:- External thread: G1/4 inch- Hard tube: 16 mm outer diameter (OD)

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 14 mm and an inner diameter of 10 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 14mm- Inner Diameter: 10mm- Length: 500 mm- Compatibility: Connections with 14 mm outside diameter

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 14 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 14 mm outer diameter (OD)

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 12 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 12 mm outer diameter (OD)

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 500 mm- Compatibility: Connections with 16 mm outside diameter

With this Barrow tube cutter you can easily cut soft and hard tubes to fit. The hose cutter is suitable for straight and clean cuts without compromise. This tool makes it easier for you to build your new water-cooled system and brings you a step closer to your perfect gaming PC.Technical details:- Color white- Material: plastic (handle), steel (blade)- Compatibility: PVC and PETG tubes (soft/hard tubes)

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 1000 mm long tube has an outer diameter of 14 mm and an inner diameter of 10 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 14mm- Inner Diameter: 10mm- Length: 1000 mm- Compatibility: Connections with 14 mm outside diameter

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 1000 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 1000 mm- Compatibility: Connections with 16 mm outside diameter

Finding the right place in the housing for the expansion tank (AGB) is complicated. Barrow offers you the option of using this bracket to attach a pump or reservoir directly to a 140 fan slot on a radiator. The bracket is mounted on the fan, but thanks to its trapezoidal shape it leaves enough space. For the AGB or the pump there are holes with a distance of 50 mm on the top.Technical details:- Dimensions: 137,1 x 23 x 136 mm (B x H x T)- Color: Black- Material: Stahl- Hole spacing (fan slot): 125 mm- Hole spacing (pump, AGB): 50 mmCompatibility:- 140mm fans- 140mm wide radiators

Barrow 's copper hard tubes are real metal hard tubes for particularly noticeable water cooling circuits . They are made of particularly thermally conductive, nickel-plated copper. With these tubes you tickle the extra bit of cooling performance out of your custom loop and with style! The black chrome look of these tubes gives your system a particularly elegant look.The 490 mm long tube has an outer diameter of 14 mm and an inner diameter of 12 mm .Technical details:- Material: copper- Color: Black / Chrome (nickel alloy)- Outer Diameter: 14mm- Inner Diameter: 12mm- Length: 490mm- Compatibility: Connections with 14 mm outside diameter

Deburring your freshly cut tubes is easy with the Barrow Hardtube deburrer . Without deburring, plastic parts from sawing could end up in your loop. In addition, the ends are very sharp after sawing the tubes and can damage the rubber seals of the connections. To deburr the ends, all you have to do is take the tool, place it on one end and twist it back and forth a few times. Finished.Technical details- Color: Black- Material: plastic, metal- Compatibility: hard tubesScope of delivery:- 1x Barrow Hardtube deburrer - black

The Barrow Multi-Link 90 degree adapter is used to connect a 12mm OD tube . Two rubber rings ensure sealing . At the other end, this adapter has the usual G1/4 inch external thread for mounting on coolers, radiators or other parts.This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour Silver- Angle: 90°- Connection: 1x Ø 12 mm- Thread: G1/4 inch

The Barrow Multi-Link 90 degree adapter is used to connect a 12mm OD tube . Two rubber rings ensure sealing . At the other end, this adapter has the usual G1/4 inch external thread for mounting on coolers, radiators or other parts.This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour Black- Angle: 90°- Connection: 1x Ø 12 mm- Thread: G1/4 inch

The Barrow Multi-Link Adapter at a 90 degree angle connects two tubes with an outer diameter of 12mm . Two rubber rings ensure sealing .This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour: Silver- Store: 90°- Connection: 2x Ø 12mm

The Barrow Multi-Link 90 degree adapter is used to connect a 12mm OD tube . Two rubber rings ensure sealing . At the other end, this adapter has the usual G1/4 inch external thread for mounting on coolers, radiators or other parts.This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour white- Angle: 90°- Connection: 1x Ø 12 mm- Thread: G1/4 inch

The Barrow Multi-Link Adapter at a 90 degree angle connects two tubes with an outer diameter of 12mm . Two rubber rings ensure sealing .This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour: Black- Store: 90°- Connection: 2x Ø 12mm

Barrow 's copper hard tubes are real metal hard tubes for particularly noticeable water cooling circuits . They are made of particularly thermally conductive, nickel-plated copper. With these tubes you tickle the extra bit of cooling performance out of your custom loop and with style! The black chrome look of these tubes gives your system a particularly elegant look.The 490 mm long tube has an outer diameter of 12 mm and an inner diameter of 10 mm .Technical details:- Material: copper- Color: Chrome (nickel alloy)- Outer Diameter: 12mm- Inner Diameter: 10mm- Length: 490mm- Compatibility: Connections with 12 mm outside diameter

The Barrow Multi-Link 90 degree adapter is used to connect a 14mm OD tube . Two rubber rings ensure sealing . At the other end, this adapter has the usual G1/4 inch external thread for mounting on coolers, radiators or other parts.This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour Silver- Angle: 90°- Connection: 1x Ø 14 mm- Thread: G1/4 inch

The Barrow Multi-Link 90 degree adapter is used to connect a 14mm OD tube . Two rubber rings ensure sealing . At the other end, this adapter has the usual G1/4 inch external thread for mounting on coolers, radiators or other parts.This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour Black- Angle: 90°- Connection: 1x Ø 14 mm- Thread: G1/4 inch

The Barrow Multi-Link 90 degree adapter is used to connect a 14mm OD tube . Two rubber rings ensure sealing . At the other end, this adapter has the usual G1/4 inch external thread for mounting on coolers, radiators or other parts.This adapter enables you to have a particularly clean and straight tubing and a convenient installation of your water cooling system. Bending hard tubes can sometimes be a difficult task. Use this adapter instead of a 90 degree bend and save time, material and nerves.Technical details:- Material: brass, nickel-plated- Colour white- Angle: 90°- Connection: 1x Ø 14 mm- Thread: G1/4 inch