Other Components Aqua Computer

HUBBY7 is an internal USB 2.0 hub with seven ports. The hub is designed to meet the requirements of Aqua Computers sensors and controllers and comes with some special features:Safety:Current monitoring of connected devices and automatic shutdown of the hub and error reporting to the operating system in case of overcurrent. Additional thermal monitoring and safety fuse to prevent damage to motherboard and connected devices.Flexibility:Power can by supplied to the hub either via USB connection to the motherboard or via SATA power connector. If power is supplied via USB, depending on motherboard configuration, power will also be supplied during standby of the PC, therefore enabling connected devices …

The kryoM.2 evo is a PCIe 3.0 x4 adapter for single sided M.2/M-Key NGFF PCIe SSDs and is compatible with the form factor 2280.Special features of the kryoM.2 evo:- Large passive heatsink for the top side of the SSD- Integrated heat sink for the rear side of the SSD- Configurable LED lighting and additional activity indicator- Silicone seal for SSD protection from environmental influences and homogeneous lighting- Impedance controlled PCIe Lanes for high signal quality, high data rates and prevention of data errors- PCIe plug with hard gold coating- Gold coated PCB- Slot bracket for optimized air flowDuring installation, the SSD is pressed between the large passive heat sink and rear heat sink …

The QUADRO is an innovative four-channel RGB controller for controlling LED strips of RGBpx series of Aqua computer and also a PWM controller for also four fans . In addition, four temperature sensors can be connected . The QUADRO is connected via USB 2.0 header to a correspondingly equipped motherboard. The configuration then takes place via the aquasuite software.Features- Programmable four-channel fan control- Four fan outputs with up to 25 watts per channel and speed monitoring- All fan outputs with 4-pin plug and PWM signal adjustable- Four temperature sensor inputs- RGBpx LED output for LED strips and fans with individually addressable LEDs- USB 2.0 interface- Aquabus interfaceControl …

This temperature sensor has one G1 / 4 internal and external thread and is extremely space-saving, as it can be mounted directly on a CPU cooler or a radiator. The sensor has a 60cm connection cable and a two-pin plug.Specifications: Connection thread G1 / 4 Nickel-plated brass body Delrin seal Compatible with:-Aquaero 3.07, aquaero 4:00-Aquastream Ultra XT-Aquaduct variants with external sensor input (360 XT, 720 XT)-Various motherboards with sensor inputs