PC adapters

05-50008-00...

05-50077-02...

SAS - Controller / Internal Slots 1 x SFF-8654

The P411W-32P adapter leverages Broadcom’s world-class board design, PEX88048 PCIe Gen 4.0 switch chip, and solid firmware expertise, to provide advanced features not available using traditional NVMe drive attach methods. Similar to Broadcom MegaRAID adapters and HBAs, the P411W-32P adapter is supplied with fully validated and supported firmware and standards based out of band manageability features.

H5-25573-00...

General informationVoltage Provided19VBrandAcerAdapter TypeAcerColourBlackPower Provided45Watt

General informationVoltage Provided19VBrandAcerAdapter TypeAcerColourBlackPower Provided65Watt

The HBA 1100 delivers enterprise resiliency with its broadly deployed Smart Storage stack. Based on the PM8222 8x12G SmartIOC 2100 SAS/SATA protocol controller the HBA 1100 Series provides a robust and stable solution that can handle the toughest system workloads and configurations. It offers over 40 percent power savings compared to previous generations and significant power advantages versus competing solutions. It is fully tools-compatible with existing and future Microsemi HBA RAID and expander solutions.N/AN/AOptimized for New Devices and New Use CasesN/AN/AThe HBA 1100 supports SMR HDDs and their specific command sets (ZAC/ZBC for SAS/SATA SMR drives) enabling cost-efficient solutions …

10-In-1 Usb-C Dock

9 In 1 Usb-C Multiport Dock

STATION SUPPORT DUAL DISPLAYPORT

If your new graphics card has more 6pin PCIe connector requirements than your own power supply has connections to offer, then an appropriate adapter is required in order to still achieve the required number of PCIe connectors.The most common which is often included with the graphics cards which is two Molex plugs to PCIe. However, there are other possibilities. In this variant, the power for the graphics card comes from a pair of SATA connectors that usually power SATA drives. Two 15-Pin SATA are converted to a 6pin PCIe. Particularly useful when no more connections are free.Specification- Connectors: 2 x 15-Pin SATA power (in), 1x 6pin PCIe (out)Cable length: approx. 15 cm

Single 4pin PSU molex to two 15pin SATA power connectors. Enables connection of two SATA devices to standard 4pin Molex of the PSU.- Provides 2 additional SATA power connectors- 4pin PSU molex to 2x 15pin SATA power- 30cm long

Convert PSU 4 pin ATX connector to 8 pin ATX connector 4-pin ATX 12V female to 8-pin (4+4) male power adapter cable with black sleeve.Length:15cm

USB 3.0 19-pin motherboard female connector to USB 2.0 9-pin male connector. Converts USB 3.0 motherboard connector to USB 2.0 connector.

This cable adapter converts a 6-Pin PCI-E connector to an 8-pin ATX12V CPU connector. It provides support for dual and quad processor motherboards from a standard ATX power supply.- 6-Pin PCI-E to 8-Pin ATX12V adapter- Updates PSU compatibility with dual and quad processors systems- Quality connectors for safe connection

Additional connector for 4pin peripheries, converts 15pin SATA PSU power to 4pin PSU Molex connector, designed for ITX and ATX power supplies without sufficient number of 4pin Molex power connectors, length: 15cm.

Mounting adapter allows for installing single 2.5" or 3.5" disk drive into into a 5.25" PC drive bay. Anti vibration pads eliminate HDD vibration and prevent structure born noise and resonance. Suitable for all SDD and HDD IDE PATA / SATA drives. Black coating. • 2.5" or 3.5" to 5.25" HDD conversion• Eliminates vibration noise and resonance• Black coating

• USB 3.0 19-Pin internal connector to 2 x USB 3.0 female port with PCI bracket• USB 3.0 female port backwards compatible with USB 2.0• SuperSpeed USB 3.0 connection• Length : 40cm