PCI-E risers

Mount your GPU vertically with the CableMod PCIe 4.0 Riser Cable. With its all-black aesthetic, this riser cable takes full advantage of PCIe 4.0 technology and allows you to creatively mount your graphics card. Perfect for smaller builds and showing off RGB lighting, this technology makes it compatible with many of the PCIe 4.0 GPUs from Nvidia and AMD available. Segmented to allow heat to dissipate, this riser cable is manufactured from premium materials for amazing durability and signal quality.CableMod PCIe 4.0 Riser Cable at a Glance:300mm PCIe 4.0 riser cable for vertical GPU mountingPerfect for SFF builds and casesPure copper tinning process for minimal signal loss300mm long with a segmented …

Mount your GPU vertically with the CableMod Angle PCIe 4.0 Riser Cable. With its all-black aesthetic, this riser cable takes full advantage of PCIe 4.0 technology and allows you to creatively mount your graphics card. Perfect for smaller builds and showing off RGB lighting, this technology makes it compatible with many of the PCIe 4.0 GPUs from Nvidia and AMD available. Segmented to allow heat to dissipate, this riser cable is manufactured from premium materials for amazing durability and signal quality.CableMod Right Angle PCIe 4.0 Riser Cable at a Glance:220mm Right Angle PCIe 4.0 riser cable for vertical GPU mountingPerfect for SFF builds and casesPure copper tinning process for minimal signal …

CableMod's black vertical graphics card holder consists of a special PCI slot bezel and PCIe riser cable. It enables users to easily vertically mount a graphics card to any tower case with a free PCI slot and least seven further free slots above. The bundled riser cable connects the GPU to a PCIe slot on the motherboard. When its x16 slot is connected to a full x16 data line, the full bandwidth can be used for graphics. Two right-angle DisplayPort cables are also included.Important note: The total length of the graphics card is increased by 3.1 cm by using the vertical graphics card holder Specification: Colour: black Material: Powder coated steel Plug: PCIe …

CableMod's black vertical graphics card holder consists of a special PCI slot bezel and PCIe riser cable. It enables users to easily vertically mount a graphics card to any tower case with a free PCI slot and least seven further free slots above. The bundled riser cable connects the GPU to a PCIe slot on the motherboard. When its x16 slot is connected to a full x16 data line, the full bandwidth can be used for graphics. Two right-angle DisplayPort cables are also included.Important note: The total length of the graphics card is increased by 3.1 cm by using the vertical graphics card holder Specification: Colour: black Material: Powder coated steel Plug: PCIe …

Flex Your Graphics Card MuscleN/AThe Cooler Master Riser Cable PCIe 4.0 x16 - 300mm is designed for greater data transmission efficiency maximum flexibility and durability. High quality plastics grant increased cable flexibility and strength for the tightest PCI card installations while the heavy-duty shielding prevents electromagnetic interference from degrading signal quality. The multi-layer coated PCB provides the best-in-class cable flex moisture resistance and performance under high thermal loads.N/AN/APCIe 4.0 CompatibleN/AWhile Providing twice the bandwidth of PCIe 3.0 the Gen 4.0 riser cable remains backwards compatible with a maximum transfer rate of over 64Gb/s (bi-directional) and …

FeaturesCompatible chassis typeUniversalNumber of graphics cards supported1 pc(s)TypeGPU kitProduct colourBlackCompatible productsNorth, Focus 2, Define 7, Meshify 2, TorrentPCI Express slots quantity1PCI Express slots version4.0Riser cable includedYesRiser cable length19.5 cmWeight & dimensionsWidth124 mmDepth196 mmHeight144 mmWeight300 gPackage width168 mmPackage depth250 mmPackage height62 mmPackage weight360 gTechnical detailsCompatible chassis typeUniversalNumber of graphics cards suppo

This riser cable from the case specialists at Kolink allows the PCI-Express x16 slot on the motherboard to interface with a graphics card in a vertical orientation. The Kolink PCI Express 3.0 x16 to x16 riser cable is approximately 200 mm long. Due to its exceptional manufacturing quality and design, it is suitable for use in cases from all manufacturers.

This riser cable from the case design specialists at Kolink allows the PCI Express x16 slot on a motherboard to be connected to a graphics card installed vertically within a case. The Kolink PCI Express 3.0 x16 on x16 riser cable is approximately 300 mm long. It is suitable for use in cases from all manufacturers due to its high quality design.

With the Kolink PCIe Gen 4.0 Riser Cable, you can easily mount your GPU vertically within small form factor builds. This 300mm long cable is perfect for Micro-ATX cases that support this orientation. Thanks to its 180-degree connector, this riser cable is easy to install and offers great flexibility. Kolink PCIe Gen 4.0 Riser Cable at a Glance: PCIe 4.0 riser cable with 180-degree connector Flat ribbon cable 300mm long Utilises copper core wiring for reliable performance Maximum transfer speeds of 256G/bps Easy to install Perfect for SFF builds and vertically mounting GPUs Designed for SFF Builds The Kolink PCIe Gen 4.0 Riser Cable is the perfect addition to your SFF gaming PC. Allowing …

The Kolink PCIe Gen 4.0 Riser Cable is the perfect addition to your SFF gaming PC. Allowing you to vertically mount your graphics card, this is best used in a Mini-ITX case thanks to its 220mm length. With its 90-degree connector, this riser cable is easy to install.

Model PW-PCI-4-24X Color Black PCIe Riser Cable Gen 4.0 Cable Length 240mm Warranty 1 year

Vertical GPU mount accessory for the White O11D MINI case which includes a 200mm long PCIe Gen3 x16 riser cable. Allows display of your graphisc card with a simple installation and different configurations.

Vertical GPU mount accessory for the White O11D MINI case which includes a 200mm long PCIe Gen4 x16 riser cable. Allows display of your graphisc card with a simple installation and different configurations.

Vertical GPU mount accessory for the Black O11D MINI case which includes a 200mm long PCIe Gen3 x16 riser cable. Allows display of your graphisc card with a simple installation and different configurations.

The latest PCIe 4.0 supports transfer rates of 16GT/s bit rate. While providing double the bandwidth of PCIe 3.0, the Gen 4.0 riser cable remains backward compatible with a maximum transfer speed, offers great performance, and shows off the GPU at a great new angle Supports the O11D MINI, O11D & O11D XL

This upgrade kit, consisting of a riser cable and a PCI slot bracket, allows a graphics card to be installed a vertical orientation inside the Lian Li PC-O11 Dynamic XL (ROG Certified) Midi-Tower. To achieve this, the bottom five of a total of seven slot brackets on the Lian Li PC-O11 Dynamic XL will be removed and replaced by those included in the kit. Those wishing to install a second graphics card, also in a vertical orientation, will require a second riser cable which is also available from Lian Li.

Keeping up with the ever-changing technology, LIAN Li is offering a stable and flexible 600mm long PCI-e 4.0 riser cable that allows graphic cards to mount apart from the motherboard in many mid-tower PC cases.