Hi-Fi Racks & Mounts

AMM Suspension Bracket The AMM Suspension Bracket is designed for use with Bose AMM108 or the Bose AMM112 loudspeaker. The Suspension Bracket is designed to provide single point suspension for the loudspeakers and mounts along the center of gravity so the loudspeaker hangs level. The bracket has multiple single-point suspension attachment points to allow incremental angle adjustment from 40 degrees (AMM108) or 35 degrees (AMM112) of downtilt and ranging to 30 degrees (AMM108) or 25 degrees (AMM112) of uptilt. The bracket fits the M10 threaded attachment points on the top of loudspeaker is shipped with required fasteners for attaching the bracket to the loudspeaker and is not designed for …

ArenaMatch AMUBRKT U-Bracket Kit The ArenaMatch AMUBRKT U-bracket allows for versatile mounting of a single ArenaMatch loudspeaker with full 360? rotation to accommodate any installed pitch angle. The structural rigidity of the bracket allows either two-point attachment to flat surfaces such as walls or ceilings or single- point attachment via the center mounting hole to secondary support structures such as third-party lighting-pole mounting kits. Bose ArenaMatch array rigging accessories are designed for use with ArenaMatch DeltaQ Array loudspeakers (AM10 AM20 and AM40) only. All accessory kits are shipped in pairs and includes all required fasteners.

Use the ShowMatch Array Frame (SMAF) to create overhead suspended arrays that contain subwoofer modules or to create ground stack arrays that use any combination of subwoofer modules mid/high modules or both.

Reducer flange for TV pin ø 28 mm for use on all common stands with tube diameter of 35 mm. The sleeve is simply put on and fixed with a clamping screw. For lighting crossbars and individual spotlights. Made in: Germany Length: 25 cm Colour: Black Material: Steel

Placement: Attaches to rectangular forklift support braces 1.5" to 2.5" wide Tilt: Yes - Clevis up to 90 fore / Yes - Clam Shells up to 160 Swivel: Motion Attachment - 360 / Entire arm - 360

KIT

Table monitor stand. Features: The height adjustment is variable between 167 and 254 mm. 4 rubber pads each for floor and tray provide for stability and noise filtration. The recommended max. load is 15 kg. The support area (tray) dimensions are 150 x 170 mm. Material: steel. Colour: Grey. Material: Steel Height Adjustable: Yes Colour: Grey Package Quantity (pcs): 1 Package Contents: Isolation Pads;Manual Panel Surface: 214 mm x 214 mm Net Weight (kg): 3.41 Minimum Height: 167 mm Original Colour by Producer: Grey;Grey Maximum Height: 254 mm Load Capacity: 15 kg Made in: Germany

Elegant floor stand with large, flat cast-iron round base for near-field monitors and loudspeakers. The solid steel construction impresses with its stability and holds speakers and monitors securely in the desired position. The 205 x 245 mm support plate is simply screwed onto the 3/8" threaded connection. It can also be used to mount speakers and monitors directly, as well as mounting plates from Genelec and other manufacturers. For optimal listening height, 50 mm steps can be set between 950 and 1450 mm. The slim clamp with safety hook is easy and comfortable to use. A load capacity of 35 kg is possible when the load is centred. Four threaded spikes and four self-adhesive rubber studs are …

Steel stand for monitors with 3-leg base, stable and solid. Height adjustable (680 mm to 1140 mm) with a non-scratching locking screw and additional safety pin, internal cable routing possible. The dimensions of the base for the monitor are 245 x 205 mm, weight capacity is up to 35 kg, weight of the stand is 5,35 kg. Colour: Black. Type: Stand Weight: 5,1 kg Made in: Germany Maximum Height: 1132 mm Load Capacity: 35 kg Material: Steel Colour: Black Minimum Height: 677 mm Package Quantity (pcs): 1

Separate weight plate to increase stability, for speaker stands with M20 base plate. The plate has a diameter of 325 mm and a thickness of 8 mm. There is an additional bore hole for a cable bushing. Self-adhesive rubber buffers ensure non-slip, low-noise operation. The weight is 5 kg. The weight plate can be mounted easily without any tools. Several plates can also be stacked onto each other. Height (mm): 8.0 Weight: 4,9 kg Diameter (mm): 325.0 Made in: Germany Colour: Black Material: Steel Compatible with: Stand

Extra high steel tube combination for use with various base plates with M20 threaded bushings. The extension tube has a diameter of 35 mm to accommodate speaker cabinets with flange adapter.The height is fixed with a safety hook and secured by a clamping screw for a vibration-free and firm fit.The slim design of the clamp allows space-saving transport and ensures a stylish appearance.The usable height is between 1,400 and 2,400 mm and is adjusted in 5 steps of 200 mm. The integrated M10 threaded bushing allows the attachment of a truss or the direct mounting of lights. Maximum Height: 2400 mm Weight: 3,7 kg Minimum Height: 1400 mm Load Capacity: 18 kg Diameter (mm): 35.0 Made in: Germany Colour: …

Robust and useful loudspeaker ceiling mount with 250 mm distance and internal cable management. The swivel area is +/-45 °. Within the parameters - the settings range from 0 to 45°. The clamping bracket is for loudspeakers with a vertical mounting template from 70 to 76.2 mm. For other attachment possibilities additional adapter brackets are available. A mounting bracket with side and central cable management makes mounting to the ceiling easier. Finish: White Original Colour by Producer: White Colour: White Made in: Germany

The practical wall and ceiling mount with 3/8" threaded connector has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the maximum load increases to 10 kg. The wall distance has been reduced to 160 mm. Specifications: Adjustment: swivel ball joint assembly. Angle of inclination: 0° to 90°. Type: black, with 3/8" threaded connector, without bearing plate. Material: steel. Max. load capacity: 10 kg. Mounting: attaches to walls and ceilings. Swivel: 360 º. Wall clearance: 160…

The practical wall and ceiling mount for smaller loudspeakers has been upgraded. A new feature is a cable outlet, which now provides an internal cable guide for hidden installations. Thanks to two special threaded pins and the Allen wrench / hexagon key included in the delivery, the universal joint can be positioned and set exactly. As such the maximum load increases to 10 kg. The wall distance has been reduced to 160 mm. Specifications: Adjustment: swivel ball joint assembly. Angle of inclination: 0° to 90°. Bearing plate: 95 x 80 mm. Material: steel. Max. load capacity: 10 kg. Mounting: attaches to walls and ceilings. Swivel: 360 º. Wall clearance: 160 mm. Wall plate: 95 x 95 mm. Weight: 0.6…

An easy-to-carry speaker stand made of high quality aluminum. 2-piece folding design. Fiberglass-reinforced fittings and an additional safety pin ensure stable support for the speakers. The height and feet adjust by an easy-to-use clamping lever. Material: aluminum. Height: from 1,270 to 1,930 mm. Max. load capacity: 50 kg. Tube end(s): diameter 35 mm. Weight: 2,34 kg. Colour: anodized aluminum. Adapter sleeve 21326 included. Colour: Silver Made in: Germany

Short steel tube for connecting satellite systems. Top with unique, patented expanding mandrel for a tight and backlash-free fit of the speaker. The plastic expansion jaws ensure a low-resonance connection between speaker and tube. Easy handling by means of clamping ring. Bottom with M20 threaded bolt for screwing into K&M mounting plate 24116. Material: Steel Weight: 0,63 kg Diameter (mm): 35.0 Load Capacity: 35 kg Height (mm): 245.0

Steel adapter sleeve attaches to speaker stands with tubing diameter of 35 mm, mounts with a locking screw. Integrated unique patented expanding mandrel system which provides a tight and firm fit for the speaker. The moveable plastic splints separate the speaker from the stand creating a vibration-free connection. Ring Lock System. Material: steel. Height: 270 mm. Tube end(s): »Ring Lock« diameter 35 to 37 mm. Weight: 0,66 kg. Colour: Black. Made in: Germany

Unshakable and sturdy! This high quality, height adjustable distance rod is a guarantee for a secure, stable and quiet connection to satellite systems. The height is adjusted by an easy-to-use spring-loaded bolt and locking screw. The distance rod is connected to the subwoofer using the M20 threaded bolt. The unique patented expanding mandrel system provides a stable, tight and firm fit for satellite speakers. The movable plastic splints provide for a vibration-free connection between the rod and the speaker. Connecting the speaker is easy and is done using the handy ring lock - which is simply placed in position and screwed on. Diameter (mm): 37.0 Load Capacity: 35 kg Height Adjustable: Yes Maximum …

Speaker tilt connector with 15° inclination attachable to speaker stands and distance rods with a tube diameter of 35 mm. The depth of the tube intake is approx. 100 mm. Due to the off-centre positioning in connection with the 15° inclination, the center of gravity of the speaker cabinet moves back to the centre and consequently provides more stability and steadiness for the stand or distance rod. The depth can be adjusted up to 50 mm. The speaker mounting bolt has a diameter of 35 mm and a height of 84 mm. Solid steel construction with robust powder coating. Convenient clamping screw for mounting on the speaker stand. Height (mm): 205.0 Load Capacity: 25 kg Diameter (mm): 35.0 Colour: …

Suspension hardware and loudspeaker cosmetic cover designed for hanging FreeSpace 3BF bass loudspeaker from open ceilings. Kit includes: cover suspension cables and eye screws. Loudspeakers must be purchased separately.

Designed for mounting FreeSpace 3BF bass loudspeaker in new-construction hard-deck ceilings.

Hama 00118000 speaker mount Wall White