Other Network Equipment

Cablenet 24 Port Cat6 UTP 1u Easypunch Patch Panel

Cablenet 24 Port Cat6 UTP 1u Eco Patch Panel

Cablenet 25 Way 1u Voice Panel 3 Pair (1,2-3,6-4,5)

Cablenet 32 Way 2u Loaded BNC Panel Black

The Cablenet Cat5e UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.

The Cablenet Cat5e UTP 2u punch down patch panel with 48 ports in 2u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.

Cablenet 48 Port Cat6a 1u Unloaded Keystone Patch Panel

The Cablenet Cat6 UTP 1u high density punch down patch panel with 48 ports in just 1u. Incorporates a rear cable management tray and horizontal dual punch down blocks for LSA or 110.

Termination is easy with detachable upper and lower termination layers. The upper detachable punch down tray is for ports 1 - 24 and the lower section for ports 25 - 48. After termination the top section is simply placed onto the lower section and held in place by two screws.

Coloured markings on punch down blocks and rear labels for correct cable termination.

These 2u Cat6 unshielded UTP Through Coupler Panels are capable of data rates up to 1Gb/sec. They incorporate a removable rear cable management bar and come complete with cable ties. Installation is easy just plug in your patch leads - no punch down required.

The Cablenet Cat6 UTP 2u 48 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punchdown blocks on rear of panel at 180 degrees to the front ports. An integrated cable management bar and cable management rings at the rear of the patch panel allows routing of the cables to aid airflow.

Ports are labelled in banks of 8 and feature a slide in label and plastic cover.

Coloured markings on punch down blocks and rear labels for correct cable termination.

Cablenet 50 and 25 port RJ45 1u high density voice panel with punch down blocks at the rear for a maximum of 3 pairs (6 wires).

The Cablenet voice panel has been designed for both digital and analogue applications depending on phone system to be installed.

Typical wiring: Pair 4&5 Analogue Pair 3&6 Panasonic Digital Pair 1&2 BT Digital.

The Cablenet Cat5e UTP 1u 24 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punch down blocks on rear of panel at 180 degrees to the front. Cable management rings at the rear of the patch panel allows routing of the cables to aid airflow.

Each port has a provision for individual labelling.

Coloured markings on punch down blocks and rear labels for correct cable termination.

The Cablenet Cat6 UTP 1u 24 port patch panel offers Cat6 compliant performance and supports high speed protocols up to 1G Ethernet.
The panel is backwards compatible to all preceding cabling categories ensuring support of all IP applications designed to run over them.

The vertically mounted PCB provides easy termination using a Krone or 110 punch down tool and there are colour coded labels for both 568A and 568B wiring configurations.
The panel has individually numbered ports and a port labelling facility.
The rear cable management bar can be easily removed and fitted without the need for tools thus providing improved access to terminations.

OM3/4 Multimode Loaded Fibre Patch Panel to accept 12 fibres connecting to 6 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.…

OM3/4 Multimode Loaded Fibre Patch Panel to accept 48 fibres connecting to 24 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.…

OM3 Multimode Loaded Fibre Patch Panel to accept 96 fibres connecting to 24 LC quad adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.
…

OS2 Singlemode Loaded Fibre Patch Panel to accept 24 fibres connecting to 12 LC duplex adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs.…

OS2 Singlemode Loaded Fibre Patch Panel to accept 96 fibres connecting to 24 LC quad adaptors.

Capacity can be increased by removing the blanking plugs and replacing with the appropriate adaptor.

The Maxxam Loaded Fibre Patch Panels have been developed to help save time and money when on site. The panels are supplied with the adaptors installed in the front plate and the front plate subsequently mounted on to the panel chassis. The 19-inch mounting brackets are also fitted to the panel chassis so that the panel is ready to be mounted into the rack or cabinet. The panels are supplied with cable glands bunny clips and splice cassettes and any unused ports are fitted with blanking plugs. …

CNL OF PPan OM4 24 OF LC DX x12

-

The EFB Sfp1000Sx sfp transceiver in Silver is a high-quality networking device designed for use in computer networks. This transceiver is specifically designed for use with fiber optic cables, allowing for high-speed data transmission over long distances.The Silver casing of the transceiver gives it a sleek and modern look that will complement any networking setup. It is a reliable and durable device that is built to last, ensuring consistent performance in even the most demanding network environments.With a data transfer rate of 1 Gbps, this transceiver is perfect for high-bandwidth applications such as video streaming, data backup, and cloud computing. It is compatible with a wide range of …

Specifications:- SFP transceiver type: Optical fiber- Maximum data transfer range: 10000 Mbit/s- Interface type: SFP+- Single Mode Fiber (SMF) Compatible: Yes- Fiber optic connector: L.C.- Supported Cable Fiber Diameters: 9/125µm- Maximum transfer distance: 10000m- Wavelength: 1310nm- Digital Diagnostic Monitoring (DDM): Yes- Harmonization System (HS) Code: 85369010Characteristics:- Hot-Plug Compatibility: Yes- Compatible brand: CiscoEnvironmental conditions:- Operating temperature range: 0 - 70°CTechnical details:- Sustainability certificates: RoHS

The solution for the coverage of the wireless signal of the WiFi router in your home is the Engel PW3000 wireless repeater.By plugging the repeater into any 220V network outlet you will be able to amplify the WiFi signal, thus achieving optimal coverage and high speed.Specifications:- Integrated antennas.- Maximum security of the WLAN with WPA2, WPA and WEP (128/64).- Supports 2.4 GHz WLAN networks.- Compatible with 802.11g (54MB/s) and 802.11b (11MB/s).- WLAN 802.11n for high-speed wireless access.- Improves wireless coverage on all WLAN networks.

Kit includes antenna cable a flat bracket and a right angle bracket