Other Network Equipment NETGEAR

The M4300 Stackable L3 Managed Switch Series comes with 40G 10G and 1G models in a variety of form factors including PoE+ full provisioning. SDN-ready withN/AOpenFlow 1.3 M4300 Switch Series delivers IPv4/IPv6 rich services for mid-enterprise edge and SMB core with mixed stacking between 40- 10- and 1-Gigabit models.N/ALayer 3 feature set includes static and policy-based routing RIP VRRP OSPF and PIM dynamic routing. M4300 is ideal for server aggregation wireless access unifiedN/Acommunications and Video-over-IP.

The M4300 Stackable L3 Managed Switch Series comes with 40G, 10G and 1G models in a variety of form factors including PoE+ full provisioning. SDN-ready withOpenFlow 1.3, M4300 Switch Series delivers IPv4/IPv6 rich services for mid-enterprise edge and SMB core with mixed stacking between 40-, 10- and 1-Gigabit models.Layer 3 feature set includes static and policy-based routing, RIP, VRRP, OSPF, and PIM dynamic routing. M4300 is ideal for server aggregation, wireless access, unifiedcommunications and Video-over-IP.Specifications:Network:- Ethernet interface type: 10 Gigabit Ethernet- Ethernet LAN data rates: 1000,10000 Mbit/sOptical fiber: - Fiber optic connector: SFP+Data transmission: - Bandwidth: …

The M4300 Stackable L3 Managed Switch Series comes with 40G 10G and 1G models in a variety of form factors including PoE+ full provisioning. SDN-ready withN/AOpenFlow 1.3 M4300 Switch Series delivers IPv4/IPv6 rich services for mid-enterprise edge and SMB core with mixed stacking between 40- 10- and 1-Gigabit models.N/ALayer 3 feature set includes static and policy-based routing RIP VRRP OSPF and PIM dynamic routing. M4300 is ideal for server aggregation wireless access unifiedN/Acommunications and Video-over-IP.

Network Accessory

The NETGEAR 10GBASE-T SFP+ Transceiver (AXM765) delivers 10G copper connectivity with CAT6a or CAT7 cabling up to 30 meters (98.5 feet) when inserted in a switch SFP+ fiber module slot. The AXM765 fits into SFP+ interfaces of M4300, M5300, M6100, M7100 and M7300 Managed Switches, as well as select Smart Managed Pro and Plus Switches. Compatible with the IEEE 802.3an/bz standard, AXM765 delivers Multi-Gigabit copper connectivity with CAT5e or CAT6 cabling up to 100 meters (92.8 feet) when inserted in Multi-Gigabit SFP+ fiber module slot, or Gigabit copper connectivity when inserted in Gigabit SFP fiber module slot.

NETGEAR ProSafe 10 Gigabit SFP+ transceivers fit into M5300, M7100 and M7300 series standard SFP+ interfaces, providing hot-swappable installation and removal. Select Smart switches and Plus switches will also connect 10 Gigabit SFP+ transceivers.Features:- 10 Gigabit Ethernet short range fiber connectivity- LC duplex connector- Fits into SFP+ interfaces of M5300, M7100 and M7300 series Managed Switches- Fits into SFP+ interfaces of select Smart and Plus Switches- Drives 10 Gigabit Ethernet up to 550 m (1,804 ft) distances with 50/125µm OM4 multimode fiber cables- Drives 10 Gigabit Ethernet up to 300 m (984 ft) distances with 50/125µm OM3 multimode fiber cables- Drives 10 Gigabit Ethernet up…

Netgear 10 Gigabit SR SFP+ Module. Maximum data transfer rate: 10000 Mbit/s, Maximum transfer distance: 300 m, Cabling technology: 10Gbase-SRFeatures:- Adds 10 Gigabit Ethernet ´´short-reach´´ LC fiber connectivity to the standard SFP+ interfaces- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxS- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743Specifications:- Maximum data transfer rate: 10000 Mbit/s- Maximum transfer distance: 300 m- Cabling technology: 10Gbase-SR

Specifications:- Additional PSU for M4300-28G and M4300-52G- C14 connector- 110V-240V AC power input- Up to 150W output power at 110/220V AC

Specifications:Performance:- Compatibility: M4300-8X8F, M4300-12X12F, M4300-24X24FPower: - Total power: 250 W- AC input voltage: 100 - 240 V- AC input frequency: 50 - 60 Hz

Additional PSU for M4300-28G-PoE+ (GSM4328PA) and M4300-52G-PoE+ (GSM4352PA)- C14 connector- 110V-240V AC power input- Up to 575W output power at 110/220V AC

Omnidirectional Mimo AntennaOmnidirectional Mimo AntennaBoost Performance Indoors Or In Fringe Network Areas By Plugging This Antenna Into Your 3G/4G/5G Modem Or Mobile Hotspot With Ts-9 Or Sma Connectors. This Antenna Is Designed To Improve Reception And Extend Coverage When In Buildings Vehicles Or Remote Sites Where Network Coverage Is Sparse. Simple Installation No Software Required.

The ProSAFE® GBIC Module is a LC duplex connector and meets SFP GBIC standard for use with any SFP GBIC compliant slot.Features:- Gigabit Ethernet short-reach fiber connectivity- LC duplex connector- Fits into SFP interfaces of all Fully Managed Switches- Fits into SFP interfaces of all Smart Switches- Fits into SFP interfaces of JGS524F- Drives Gigabit Ethernet up to 1,000 m distances with 50/125µm laser-optimized OM4 multimode fiber cables- Drives Gigabit Ethernet up to 550 m distances with 50/125µm laser-optimized OM3 multimode fiber cables- Drives Gigabit Ethernet up to 275 m distances with 62.5/125ìm OM1 multimode fiber cables

AddOn Networks AGM731F-AO network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

The NETGEAR ProSafe 10GBASE-LRM SFP+ Transceiver Silver is a high-performance networking device designed for reliable and fast data transmission. It is specifically built to support 10 Gigabit Ethernet connections, ensuring optimal network performance for demanding applications.This transceiver is equipped with a Small Form-factor Pluggable Plus (SFP+) interface, allowing for easy installation and compatibility with a wide range of network equipment. With its compact size and lightweight design, it can be effortlessly integrated into any networking setup.The ProSafe 10GBASE-LRM SFP+ Transceiver Silver is engineered to provide long-range connectivity, offering a link length of up to 220m over …

This GBIC is built to insert into any one of the two built-in 10 GE SFP+ interfaces of GSM7328Sv2 and GSM7352Sv2, and into the 10GE SFP+ interface of AX743 adapter module for GSM73xxS/GSM73xxSv2. Once inserted (hot-swappable), the AXM761 10GBASE-LR SFP+ (LC connector) drives 10 Gigabit Ethernet up to 10 km distances with 9/125µm SMF single mode fiber cables, or up to 33 m distances with 62.5/125µm OM1 multimode fiber cables.

- Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfacesN/A- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxSN/A- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743

AXM764 is NETGEAR 10GBASE-LR Lite SFP+ Transceiver a new class of SMF 10G transmitter with LC duplex connector. While not a standard yet 10GBASE-LR LITE has a specified reach of 2 km (1.24 mile) over standard 9/125m single mode fiber. 10GBASE-LR LITE isnt a replacement for standard 10GBASE-LR optics: it is just relevant alternative for shorter reach SMF applications.

These reliable and flexible cables offer ultra-low latency for Servers, Storage and Switches short 10 Gigabit uplinks, and come in 1m and 3m lengths.Features:10G Network cabling:- AXC763, is a 3-meter Passive Direct Attach Cable (DAC) SFP+ cable for 10G network cabling between SFP+ devices (network switches, servers, storage).DAC family with options:- The family of DAC cables includes the AXC761, AXC763, AXC765, AXC767 and AXC7610 Passive or Active versions in 1-meter, 3-meter, 5-meter, 7-meter and 10-meter lengths. AXC7615 and AXC7620 Active Optical DAC offer even longer 15-meter and 20-meter reach. - SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable in …

Technical Specifications:- Direct Attach Sfp+ Copper Cable (10gsfp+Cu)- Sfp+ Connector On Both Sides- Drives 10 Gigabit Ethernet (1 M Distance)- Cable Length: 1 M- Connector 1: Sfp+- Connector 2: Sfp+