Other Network Equipment

Omnidirectional Mimo AntennaOmnidirectional Mimo AntennaBoost Performance Indoors Or In Fringe Network Areas By Plugging This Antenna Into Your 3G/4G/5G Modem Or Mobile Hotspot With Ts-9 Or Sma Connectors. This Antenna Is Designed To Improve Reception And Extend Coverage When In Buildings Vehicles Or Remote Sites Where Network Coverage Is Sparse. Simple Installation No Software Required.

Use this GBIC Module to add fibre optic connectivity to the GSM7324.

KEY FEATURES
Fibre 1000BASE-LX SFP GBIC Module
Small size for high density fibre connections
Meets SFP GBIC standard for use with any SFP GBIC compliant slot
1000BASE-LX connectivity over 10Km
One LC connector
Works with 9 m single mode cabling

Adds 10 Gigabit Ethernet 'Long Reach Multimode' fiber connectivity. Fits into built-in 10GE SFP+ interfaces of GSM73xxS / GSM72xxPS as well as AX743 Module. Drive 10 Gigabit Ethernet up to 220m distances with legacy 62.5/125µm multimode fiber.

NETGEAR AXM765-20000S network transceiver module Fiber optic 10000 Mbit/s SFP+

Netgear (1m) Direct Attach Network Cable (Black)

AddOn Networks AGM731F-AO network transceiver module Fiber optic 1000 Mbit/s SFP 850 nm

ETHERNET PORT CONFIGURATION 5 Gigabit ports. PLUG-AND-PLAY Simple set up with no software to install or configuration needed and zero maintenance. FULL PERFORMANCE Non-blocking switching architecture for maximum throughput at wire speed. POWER-OVER-ETHERNET 4 PoE+ ports with 63W total power budget to power wireless AP, IP Cameras, IP Phones and much more PoE POWER AUTO-BALANCE AND ALLOCATION NETGEAR's unique PoE technology automatically balances the PoE power at the most granular level on each port, depending on the device needs. SILENT OPERATION The fanless design means zero added noise wherever its located, making it ideal for noise-sensitive environments. ENERGY EFFICIENT Designed …

Adds 10 Gigabit Ethernet short-reach LC fiber connectivity to the standard SFP+ interfaces. Fits into the two built-in 10 GE SFP+ interfaces of GSM7328S-200 and GSM7352S-200.

NETGEAR 10 Gigabit SR SFP+, 10pk network transceiver module 10000 Mbit/s SFP+

- Adds 10 Gigabit Ethernet "short-reach" LC fiber connectivity to the standard SFP+ interfacesN/A- Fits into the two built-in 10 GE SFP+ interfaces of GSM72xxPS / GSM73xxSN/A- Fits into the 10 GE SFP+ interface of SFP+ Adapter module AX743

NETGEAR ProSafe 10 Gigabit SFP+ transceivers fit into M5300 M7100 and M7300 series standard SFP+ interfaces providing hot-swappable installation and removal. Select Smart switches and Plus switches will also connect 10 Gigabit SFP+ transceivers.

• 10 Gigabit Ethernet “long range” fiber connectivity
• LC duplex connector
• Fits into SFP+ interfaces of M5300 M7100 and M7300 series Managed Switches
• Fits into SFP+ interfaces of select Smart and Plus Switches
• Drives 10 Gigabit Ethernet up to 10 km (6.2 miles) distances with 9/125?m single mode fiber cables
- Features
- Committed To Custom Yes
- Type SFP+
- Warranty 5 Year…

AXM764 is NETGEAR 10GBASE-LR Lite SFP+ Transceiver a new class of SMF 10G transmitter with LC duplex connector. While not a standard yet 10GBASE-LR LITE has a specified reach of 2 km (1.24 mile) over standard 9/125m single mode fiber. 10GBASE-LR LITE isnt a replacement for standard 10GBASE-LR optics: it is just relevant alternative for shorter reach SMF applications.

These reliable and flexible cables offer ultra-low latency for Servers, Storage and Switches short 10 Gigabit uplinks, and come in 1m and 3m lengths.Features:10G Network cabling:- AXC763, is a 3-meter Passive Direct Attach Cable (DAC) SFP+ cable for 10G network cabling between SFP+ devices (network switches, servers, storage).DAC family with options:- The family of DAC cables includes the AXC761, AXC763, AXC765, AXC767 and AXC7610 Passive or Active versions in 1-meter, 3-meter, 5-meter, 7-meter and 10-meter lengths. AXC7615 and AXC7620 Active Optical DAC offer even longer 15-meter and 20-meter reach. - SFP+ compatible connectors with a copper twin-axial cable, or a duplex fiber optic cable in …

Swing kick and spike your way to victory with Nintendo Switch Sports a collection of sports for Nintendo Switch that puts you right into the action!N/AN/ACompete in six sports with real-world movements that model your actions in the game. You can choose from:N/ATennis: rally by gently swinging the Joy-Con controller at the right time.N/AN/ABowling: roll the ball straight ahead or give it a little curve.N/AN/AChambara: Knock your opponent off the platform while attacking and defending.N/AN/AFootball: Use a gigantic ball to make dynamic plays. Enjoy matches with Joy-Con controllers to shoot and perform N/ADiving Headers. By attaching a Joy-Con controller to the Leg Strap accessory included with …

The Blok Stax 2G Hi-Fi Rack Builder is perfect for those looking to create a personalised and stylish hi-fi setup. Starting with the Blok Stax 2G Shelf Base you can then select from various Stax 2G shelves in numerous sizes that can hold both small and large hi-fi equipment. You even have the option to add up to two more shelves for a large audio system. Available in several finishes including black walnut and ash you can either mix and match different colour options or create a visually cohesive setup to enhance your home. With accumulative discounts added as you go save time and money when you shop at AV.com.

1U 12 Way Patch Panel - 12 x Cat6 Data ports

10 inch wide and is only suitable for our range of 10 inch SoHo Wall Cabinets.

The A/V patch panels complement A/V adapter inserts and offer a flexible patching solution.The A/V adapter inserts are ordered separately and quickly snap into blank patch panels.This modular capability allows custom configuration of panels to suit a variety of applications.Low cost blank inserts are available to fill unused ports and can be replaced with active couplers when the need arises.

These 1u Cat5e unshielded UTP Through Coupler Panels incorporates a removable rear cable management bar and come complete with cable ties. Installation is easy just plug in your patch leads - no punch down required.

The Cablenet Cat5e UTP 1u 16 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punch down blocks on rear of panel at 180 degrees to the front. Each of the sixteen cables can be individually secured to the rear of the patch panel with the integrated cable management bar.

Numbered ports and slide in labels beneath a Perspex cover in two groups of eight.

Coloured markings on punch down blocks and rear labels for correct cable termination.

Our BNC recessed Patch Panels are designed for easy front panel access.

The recessed design allows bulky cables to be connected in a cabinet safely without the door interfering with the bend radius.

Available as 16 way 32 way and 48 way
Loaded and unloaded options are available

1U 12 Way Patch Panel Unloaded Keystone - 12 x unloaded keystone apertures accepts ANY of the keystone jacks in our product range.

10 inch wide and is only suitable for our range of 10 inch SoHo Wall Cabinets.

These 1u Cat5e unshielded UTP Through Coupler Panels incorporates a removable rear cable management bar and come complete with cable ties. Installation is easy just plug in your patch leads - no punch down required.

The Cablenet Cat5e UTP 1u 24 port patch panels use a dual termination punch down block suitable for LSA or 110 tooling. 568B punch down blocks on rear of panel at 180 degrees to the front. Cable management is provided by the tray on which the IDC's are mounted with a tie down post secures the cables in the cabinet/rack.

Each port has a provision for individual labelling.

Coloured markings on punch down blocks and rear labels for correct cable termination.