Grinders & Polishers

The R574 Best for Metal provides an exceptionally long lifetime when coarse sanding, deburring, removing welding seams and derusting metal surfaces. The abrasive surface is coated with high-quality zirconia alumina/semi-friable aluminium oxide grit that is robust and resistant to wear. The backing material is vulcanised rubber, providing stability for prolonged work The grit is bonded using fully synthetic resin for wear resistance in heavy-duty applications. The R574 Best for Metal is compatible with Angle Grinders and Drills • Exceptionally Long Lifetime • R574 Best for Metal has an exceptionally long lifetime on metal surfaces • The high-quality zirconia alumina/semi-friable …

Greater precision: The Activteq centring tip enables active cutting in concrete and a precise hole diameter
Minimising strain: Reduced vibration thanks to AWB brazing and hardening technology
Smooth operation: Toothed carbide metal plate for easier penetration of the material without sticking
For use in masonry, concrete and reinforced concrete
Suitable for all rotary hammers with SDS-plus sockets
Made in Germany

Diameter 115 mm
Fits angle grinders of all brands
High temperature resistant
Low vibration running

The cleaning disc is supported by a fibreglass carrier plate. The N377 Best for Metal Cleaning Disc delivers fast cleaning results on metal and masonry surfaces. It features a 3D open-structured fleece, enabling rapid material removal rates without clogging. Furthermore, the 3D fleece is coated in silicon carbide which renews its entire structure and creates sharp cutting edges: for efficient and consistent material extraction. It is intended for removing rust, paint and oxide layers off metal as well as lime deposits, moss and graffiti from stone, marble and concrete.optimum speed 5,000 rpm• Fast Cleaning Results• N377 Best for Metal Cleaning Disc for fast cleaning results on metal …

Side set
For pallet repair, wood with nails/metal (100 mm)
Sheet metals, pipes, aluminium profiles (3-12 mm)
Color: Blue
Total length: 150 mm
Made in Germany

Bosch Hand Protector Protective Bar
Hand Protector shields hands when using rubber backing pads
Compatible with all Bosch angle grinders in combination with an auxiliary handle
For full compatibility list, see product description
Scope of Delivery: 1x Bosh Hand Protector

Bosch offers the ideal accessories for virtually all applications
It is Bosch aim to develop appropriate accessories for more efficient working
The research and development departments at Bosch work to develop and optimize accessories in line with the needs of users
Power source type: Corded-electric

This robust belt and disc sander is powered by a 500W motor. The 100mm sanding belt can be positioned 0-90°, horizontally or vertically. The 200mm diameter disc is provided with its own worktable and mitre gauge. The disc worktable can pivot from 0-45 degrees for accurate angle sanding. The discs are easily changed through the ‘hoop & loop’ mechanism. The machine has a no volt switch for safety. To keep the workspace clean and safe, the sander has a dust exhaust, bag and clamp. It can also be attached to a vacuum for greater dust extraction. The machine is designed and manufactured for sanding wood and similar materials and should not be used to abrade or grind metal. Supplied …

This oscillating spindle and belt sander has a double configuration with fast, easy changing between spindle sander and belt sander. Dual rotating and vertically oscillating action for fast sanding and improved work rate with reduced chance of burn. The aluminium table tilts 0-45 degrees for easy chamfering and edge work. Maximum versatility and work rate with both intricate, shaped and standard workpieces. Powerful 450W induction motor. Vented throat plates and under-table dust extraction channel. Bench mounted or freestanding operation. Non-latching safety on/off no-volt switch with dust cover. On-board storage for all accessories. Supplied with 100 x 610mm 80 grit sanding belt, sleeves, drums,…

This robust belt and disc sander is powered by a 750W motor. The 200mm sanding belt can be positioned horizontally or vertically. The 200mm diameter disc is provided with its own worktable and mitre gauge. The disc worktable can pivot from 0-45 degrees for accurate angle sanding. The discs are easily changed through the ‘hoop and loop’ mechanism. The machine has a no volt switch for safety. To keep the workspace clean and safe, the sander has a dust filter bag and clamp. It also has a dust extraction outlet for connection to a vacuum. The machine is designed and manufactured for sanding wood and similar materials and should not be used to abrade or grind metal. Supplied with sanding …

Support column for use with 1500W Belt Linisher (Stock No. 98421)

This Belt Linisher has a robust construction and a 1500W induction motor. Flat grinding is fulfilled by using the sanding support base, which is made of graphite - an ideal surface for sanding. End grinding is dealt with via the contact wheel, which is fitted with a work rest. All of this can be carefully controlled using the single-knob tracking adjustment. The machine features a spring-loaded quick release belt and comes with a 100 x 1220mm sanding belt. Fitted with a 3" dust extraction outlet, transparent safety guard and removeable spark trap. Ideal for use in workshops for metal contact grinding, chamfering and deburring. Also suitable for sanding wood and plastics. Can either be bench …

This highly robust compact belt and disc sander with a cast iron base is powered by a 370W induction motor. The 100mm sanding belt can be positioned horizontally or vertically. There is a fast-tracking knob to adjust the front wheel of the sander and a quick release belt tensioning lever. The belts can be changed quickly and easily. The 150mm diameter disc is provided with its own worktable and adjustable mitre gauge. The disc worktable is made from diecast aluminium and can pivot from 0-45 degrees for accurate angle sanding. To help keep workspaces clean and safe, there is a built-in dust extraction port. For safety, there is a no-volt release magnetic switch. The machine is designed and manufactured …

Bench-mounted combined belt sander and 150mm disc sander. Long-life induction motor with sealed bearings. Double dust extraction ports. Dual-position, multi-angle table with mitre guide. Belt sander tilt angle can be adjusted 0 - 90°. Dust-protected sealed switch and rubber-coated mounting feet. Suitable for general sanding of various materials including metal, wood and plastic. 915 x 100mm sanding belt with 390mm length belt surface. No load speed: 1450/min (disc sander), 292m/min (belt sander). Includes 80-grit belt, 80-grit hook-and-loop sanding sheet, multi-angle table and mitre guide.

The Makita 9558NBR Angle Grinder is able to cut through masonry with its high power motor The 9558NBR is the successor to the proven 9558NB, the 'R' grinders have additional soft start and anti-restart functions. The high-performance motor provides enough power for masonry cutting but still has high heat resistance. It is armature coated with protective zigzag varnish and field coated with powder varnish to protect it from dust and wire breakage. The use of the type 55 motor allows the housing circumference to be smaller than the competitors. Features:
- Spindle lock
- High heat resistance
- Shaft lock for easy wheel changes
- Makita 9558NBR Angle Grinder 125mm
- Side switch position …

Application: treatment of surfaces even in hard-to-reach work spaces, for use with rust removal, paint removal, adhesive and sealant residues as well as for cleaning/processing surfaces, welded seams and so on
Optimised for spot repair
Roloc quick change system: combination with many sanding media, quick, tool-free easy change of the abrasives
Sanding disc diameter: 50 mm
Sanding disc thread: 1/4 inch – 20 UNF

Practical: due to its handy size with 3 mm / 6 mm sanding discs, the compressed air rod grinder is ideal for working with workpieces even in confined spaces
The mini grinder with an output of 0 - 60000 rpm uses an air connection inlet of 12.91 mm with a recommended hose diameter of 5 mm
Quiet: the multifunctional tool with a power of 224 watts impresses with a low sound power level at operating pressure of only 85.8 dB and a sound pressure level of 78.7 dB
Quality: Hazet is one of the leading manufacturers of quality tools for professional use and has more than 150 years of experience in development and production
Box contents: 1x Hazet 9032M-36 mini rod grinder | including coupling plug: …

Mirka ROS 525CV Central Vacuum comes equipped with a 2.5mm orbit and a 150mm Backing Pad, making it an excellent choice for fine sanding tasks
This Pneumatic Random Orbital Sander is suitable to connect with a dust extraction system, that way you are able to sand completely dust-free
The Mirka ROS range is a powerful and dependable tool for professional sanding that focuses on comfort and convenience with a compact, lightweight, and ergonomic design
With headquarters and production located in Finland and 18 subsidiaries located in Europe, Middle East, North and South America as well as Asia, Mirka is a globally expanding company exporting and selling products to over 100 countries
Mirka …

For general sanding applications around the workshop. Table tilt function 0 - 45° for easier working. Mitre gauge on table. Dust extraction facility. Powerful quiet induction motor. Supplied with one 305mm 80 grit self - adhesive sanding sheet. Fitted with a cable and approved plug. Display carton.

Compact straight die grinder kit perfectly designed for grinding and polishing metal components. Manufactured from lightweight Aluminium housing attached to an ergonomic soft grip handle, which provides comfort even when used for prolonged periods. Fitted with a lever block trigger for increased safety and an adjustable 4 - speed rear regulator. Attached with a 1/4" BSP airline connector which connects with the 360° rotating air inlet, helping prevent air - lines from kinking when in use all stored in a robust plastic carry case. The ergonomic design and lightweight housing assist in prevention of the cold - sink effect.

Die cast aluminium alloy body with easy-grip rubber handle, automatic trigger-release and vibration isolators. Positive lock paper clamps. Muffled rear exhaust helps reduce and control dust. Includes both UK and European 1/4" quick connectors. Sanding pad dimensions 90 x 170 x 12mm. No load speed 8000min-1. Air consumption 135L/min (4.75cfm).

Compact angle grinder Ø 125 mm. CG 15-125 BL Stainless Steel
Power consumption: 1500 W. Useful power: 1050 W. No load speed: 2,700 - 7,000 RPM. Grinding wheel diameter: 125 mm. Flexible tray diameter: 125 mm. Attachment tools: M 14. Cable with plug: 4 m. Weight according to EPTA: 2.3 kg
Compact angle grinder Ø 125 mm. CG 15-125 BL Stainless Steel. Compact and powerful 1500W angle grinder with variable speed and encapsulated FEIN PowerDrive brushless motor for processing stainless steel in dusty work environment.
Box contents: 1 protective cover, 1 quick release nut, 1 anti-vibration handle, 1 key, 1 additional protective cover specific for cutting jobs
Recognized worldwide for the professional qu…

Compact angle grinder Ø 125 mm. CG 15-125 BL
Power consumption: 1500 W. Useful power: 1050 W. No load speed: 3,500 - 9,000 RPM. Grinding wheel diameter: 125 mm. Flexible tray diameter: 125 mm. Attachment tools: M 14. Cable with plug: 4 m. Weight according to EPTA: 2.2 kg
Compact angle grinder Ø 125 mm. CG 15-125 BL. Compact and powerful 1500W angle grinder with encapsulated FEIN PowerDrive brushless motor for efficient grinding, cutting and deburring work in a dusty working environment.
Box contents: 1 protective cover, 1 quick release nut, 1 anti-vibration handle, 1 key, 1 additional protective cover specific for cutting jobs
Recognized worldwide for the professional quality of its "Made in…

FEIN 72221960000 angle Grinder wsg17-125prt 2202305060
Product range: Grinders
FEIN part number: 72221960000