Other for Fishing Delphin

A luxurious cradle with a scissor opening system that offers an ideal protection for your catch while on the bank. This type of structure makes the cradle stable and easy to store. It’s made from pipes with a diameter of 20 mm to increase stability and durability of the product.The cradle itself is made of rubber material that doesn’t absorb water or odours. Plus, it dries quickly and it’s easy to clean. The bottom part of the cradle is covered with a soft mesh with reinforcing straps.The upper part of the cradle has a rubber-covered lid with a mesh. The lid is attached via a velcro zip. This way, your catch won’t get away from the cradle while you prepare your camera or scales. The lid is d…

The goal was clear when designing this product - to bring to market a tray at an unbeatable price, which can easily handle even the largest fish. The result? Delphin EazySAFE! Base of the tray is a very strong iron construction with a pipe diameter of up to 22 mm. Thanks to this, the tray has an excellent stability and there is no risk of it overturning or being damaged when handling the catch. The rubberized surface material used has several advantages. It is enough to wipe it dry and it is not necessary to wait long for it to dry after fishing. In addition, it is very easy to wash and does not absorb unpleasant odours that may occur in your car. The whole tub is very strong and during extreme …

A compact feeder rod support with three telescopic feet, designed in a REAXE style, typical for our new series of Delphin feeder products. Construction of the stand is made of aluminum without the use of any plastic parts. Such a design minimizes the possibility of damage, resp. breakage of the parts and guarantees a very low weight. Excellent stability of the stand is ensured by three telescopic legs, preventing its arbitrary from overturning during shots or wind. The legs are finished with sharp points allowing them to be pushed into the ground allowing the stand to achieve even higher strength. Thanks to the telescopic legs, it can be suitably adapted to an uneven terrain. In the middle of …

This weighting bag is a precisely made gem that is a must for every angler and every carp fishing accessory. Its basic element is its solid top part made of aluminium tubes. Thanks to its ingenious mechanism it is possible simply spread these tubes so they don´t take too much space during transport. There are four floats placed on these tubes which together with pierced parts of the bag make it possible for you to keep the fish inside or release the fish back to water. Undoubtedly, GOLEM also has 2.5m long anchoring line finished by a thread so the bag can also be anchored on the shore. There is a zip along the whole length of the bag so it can be closed perfectly. Due to the long, textile …

A visually impressive handle from the SYMBOL series, characterised by an excellent price / quality ratio. It is made of a slim structured carbon with sufficient strength to subtract the largest carp. The individual parts of the handle fit together perfectly and the solid mandrel joint will keep them together securely in all circumstances. The handle is covered with a rubber, anti-slip layer at the gripping points, which is pleasant to the touch and allows comfortable handling. For a thorough connection to the head, a minimalist stainless steel connector is used, which is connected to the handle by means of a reinforced glued thread. The Delphin SYMBOL NXT handle fits perfectly with the SYMBOL …

Delphin OPENER NEO 60 x 50 cm with dimensions is a compact landing with telescopic handle. Dimensions of the net´s opening are 60 cm x 50 cm. The net of the head is lined with a floating edging. The spreader block case and the grip are made of durable plastic. The net´s frame and handle are made of aluminium. The net is made of mesh size of 1 cm x 1,5 cm. The length of the handle is 80 cm and it can be easily folded down by using a red lever found on spreader block. Transport length is 82 cm. The full length of this landing net is 140 cm. The long telescopic handle is equipped with an ergonomic grip made of plastic. Suitable for all types of species. Material: PVC;Aluminium Designed …

A square-shaped landing net head from REAXE series with a light but sturdy black aluminium frame. The mesh is green with quality stitching. The fabric is soft and therefore gentler towards the fish than rubber or nylon mesh. Plus, it’s covered with black fabric all over the frame on the bottom side to increase durability. The design matches the green and black colour of our REAXE series. It’s ideal to combine it with REAXE handles, but it’s suitable for the majority of standard handles available on the market. Technical information:Rubber coating: NoMesh size: 8 mm x 8 mm Series: REAXE Colour: Green;Black Designed in: Czech Republic Size: 60 x 50 cm Variant: Landing Net Head Material: …

A floating oval landing net head from REAXE series with a light but sturdy black aluminium frame. The net of the FloateR FoldROUND is covered in rubber; it doesn’t absorb water and dries quickly. Plus, it’s covered with a green fabric all over the frame on the bottom side to increase durability. Since the head floats on the surface, you can leave it there until you wear the fish down and lead it towards the landing net. The design matches the green and black colour of our REAXE series. The frame is foldable in half and it won’t take as much space as standard landing net heads. It’s ideal to combine it with REAXE handles, but it’s suitable for the majority of standard …

After the undeniable success of the rodpods from the RPX range, their compact mini version is coming to the market. The RPX Stalk is a rodpod with very compact and practical dimensions that you will love from the first moment. It has all the excellent features that are characteristic of the RPX rodpods. The mini version will delight fans and devotees of the ''UK'' style. Despite its small size it will surprise you with its versatility and stability as it will easily accommodate not just stalker rods but also normal length rods. Its perfect BlackWay style design is the result of combining sandblasting technology and subsequent oxidation of the aluminium body into an effective matt black surface.…

Sophisticated multifunctional pliers that can easily handle opening rings, pressing crimping clamps or cutting various lines and cords. In addition, they have long enough jaws to remove hooks from the mouths of predatory fish. They are made of stainless steel and there is an anti-slip rubber surface on both handles, thanks to which they hold perfectly in the hand. SpinSET pliers come with a practical black case that can be easily attached to the belt. They also have a drawstring with a carabiner at the end. Practical pliers designed for even the most demanding fans of the spinner, this is the Delphin SpinSET. Technical parameters: Total length: 16.5 cm Made in: China Length: 16,5 cm Type …

Delphin TeleSAFE+ is based on a very popular model EAZYSAFE. It contains two major improvements in comparison with its predecessor.The first improvement is adjustable telescopic feet that allow you to install the cradle even in an uneven terrain for better stability under any circumstances.Another useful feature is covered joints in the middle part of the frame that keep safe both the angler and the fish.The base of the cradle TeleSAFE+ is a 22 mm solid metal construction. The rubber coating also has several advantages. It is very easy to clean and it dries quickly, all you need to do is to wipe it. Plus, it doesn’t absorb any odours, so you can safely transport it in your car. The cradle …