Other for Fishing

AISI 630 steel tempered by a special process that maintains a large elastic memory with a hardness level between 44 and 46 HRC.Very strict control process (rod per rod previously.To machining) to check the perfect straightness of the rod.Aletilla in stainless steel of spring AISI 301 of 0,8mm of thickness.Mechanical resistance close to that of the rod itself.Lace.Of the howitzer reinforced with curved radius of mechanization that make almost impossible the breakage of the rod by this traditionally weak point.Polyvalent design for metal and Dyneema howitzers.|.Extraordinary breaking strength in the opening direction of the notch of 190Nw and 40 ° angle.Especially resistant and penetrating insulation t…

AISI 630 steel tempered by a special process that maintains a large elastic memory with a hardness level between 44 and 46 HRC.Very strict control process (rod per rod previously.To machining) to check the perfect straightness of the rod.Aletilla in stainless steel of spring AISI 301 of 0,8mm of thickness.Mechanical resistance close to that of the rod itself.Lace.Of the howitzer reinforced with curved radius of mechanization that make almost impossible the breakage of the rod by this traditionally weak point.Polyvalent design for metal and Dyneema howitzers.|.Extraordinary breaking strength in the opening direction of the notch of 190Nw and 40 ° angle.Especially resistant and penetrating insulation t…

AISI 630 steel tempered by a special process that maintains a large elastic memory with a hardness level between 44 and 46 HRC.Very strict control process (rod per rod previously.To machining) to check the perfect straightness of the rod.Aletilla in stainless steel of spring AISI 301 of 0,8mm of thickness.Mechanical resistance close to that of the rod itself.Lace.Of the howitzer reinforced with curved radius of mechanization that make almost impossible the breakage of the rod by this traditionally weak point.Polyvalent design for metal and Dyneema howitzers.|.Extraordinary breaking strength in the opening direction of the notch of 190Nw and 40 ° angle.Especially resistant and penetrating insulation t…

AISI 630 steel tempered by a special process that maintains a large elastic memory with a hardness level between 44 and 46 HRC.Very strict control process (rod per rod previously.To machining) to check the perfect straightness of the rod.Aletilla in stainless steel of spring AISI 301 of 0,8mm of thickness.Mechanical resistance close to that of the rod itself.Lace.Of the howitzer reinforced with curved radius of mechanization that make almost impossible the breakage of the rod by this traditionally weak point.Polyvalent design for metal and Dyneema howitzers.|.Extraordinary breaking strength in the opening direction of the notch of 190Nw and 40 ° angle.Especially resistant and penetrating insulation t…

AISI 630 steel tempered by a special process that maintains a large elastic memory with a hardness level between 44 and 46 HRC.Very strict control process (rod per rod previously.To machining) to check the perfect straightness of the rod.Aletilla in stainless steel of spring AISI 301 of 0,8mm of thickness.Mechanical resistance close to that of the rod itself.Lace.Of the howitzer reinforced with curved radius of mechanization that make almost impossible the breakage of the rod by this traditionally weak point.Polyvalent design for metal and Dyneema howitzers.|.Extraordinary breaking strength in the opening direction of the notch of 190Nw and 40 ° angle.Especially resistant and penetrating insulation t…

Rod made with finishing parameters and very restricted dimensions to obtain a maximum adaptation to all type of mechanisms.Mechanism made of stainless steel tools “hard metal” to avoid the pollution of the rod material and possible rust spots of the machined zones.AISI 630 steel is tempered by a special process of long duration and low temperature that maintains a great elastic memory with a hardness level between 44 and 46 Rockwell.Very strict control process done rod by rod, before machining, to control the perfect straightness of each rod.Flopper made of spring stainless steel spring AISI 301 of 0,8 mm of thickness. Mechanical resistance 1269 Nw / mm2 close to the one of the rod itself. T…

Rod Made With Finishing Parameters And Very Restricted Dimensions To Obtain A Maximum Adaptation To All Type Of Mechanisms.Mechanism Made Of Stainless Steel Tools Hard Metal To Avoid The Pollution Of The Rod Material And Possible Rust Spots Of The Machined Zones.Aisi 630 Steel Is Tempered By A Special Process Of Long Duration And Low Temperature That Maintains A Great Elastic Memory With A Hardness Level Between 44 And 46 Rockwell.Very Strict Control Process Done Rod By Rod, Before Machining, To Control The Perfect Straightness Of Each Rod.Flopper Made Of Spring Stainless Steel Spring Aisi 301 Of 0,8 Mm Of Thickness.Mechanical Resistance 1269 Nw/Mm2 Close To The One Of The Rod Itself.The Size …

Rod Made With Finishing Parameters And Very Restricted Dimensions To Obtain A Maximum Adaptation To All Type Of Mechanisms.Mechanism Made Of Stainless Steel Tools Hard Metal To Avoid The Pollution Of The Rod Material And Possible Rust Spots Of The Machined Zones.Aisi 630 Steel Is Tempered By A Special Process Of Long Duration And Low Temperature That Maintains A Great Elastic Memory With A Hardness Level Between 44 And 46 Rockwell.Very Strict Control Process Done Rod By Rod, Before Machining, To Control The Perfect Straightness Of Each Rod.Flopper Made Of Spring Stainless Steel Spring Aisi 301 Of 0,8 Mm Of Thickness.Mechanical Resistance 1269 Nw/Mm2 Close To The One Of The Rod Itself.The Size …

Rod Made With Finishing Parameters And Very Restricted Dimensions To Obtain A Maximum Adaptation To All Type Of Mechanisms.Mechanism Made Of Stainless Steel Tools Hard Metal To Avoid The Pollution Of The Rod Material And Possible Rust Spots Of The Machined Zones.Aisi 630 Steel Is Tempered By A Special Process Of Long Duration And Low Temperature That Maintains A Great Elastic Memory With A Hardness Level Between 44 And 46 Rockwell.Very Strict Control Process Done Rod By Rod, Before Machining, To Control The Perfect Straightness Of Each Rod.Flopper Made Of Spring Stainless Steel Spring Aisi 301 Of 0,8 Mm Of Thickness.Mechanical Resistance 1269 Nw/Mm2 Close To The One Of The Rod Itself.The Size …

Rod Made With Finishing Parameters And Very Restricted Dimensions To Obtain A Maximum Adaptation To All Type Of Mechanisms.Mechanism Made Of Stainless Steel Tools Hard Metal To Avoid The Pollution Of The Rod Material And Possible Rust Spots Of The Machined Zones.Aisi 630 Steel Is Tempered By A Special Process Of Long Duration And Low Temperature That Maintains A Great Elastic Memory With A Hardness Level Between 44 And 46 Rockwell.Very Strict Control Process Done Rod By Rod, Before Machining, To Control The Perfect Straightness Of Each Rod.Flopper Made Of Spring Stainless Steel Spring Aisi 301 Of 0,8 Mm Of Thickness.Mechanical Resistance 1269 Nw/Mm2 Close To The One Of The Rod Itself.The Size …

Rod Made With Finishing Parameters And Very Restricted Dimensions To Obtain A Maximum Adaptation To All Type Of Mechanisms.Mechanism Made Of Stainless Steel Tools Hard Metal To Avoid The Pollution Of The Rod Material And Possible Rust Spots Of The Machined Zones.Aisi 630 Steel Is Tempered By A Special Process Of Long Duration And Low Temperature That Maintains A Great Elastic Memory With A Hardness Level Between 44 And 46 Rockwell.Very Strict Control Process Done Rod By Rod, Before Machining, To Control The Perfect Straightness Of Each Rod.Flopper Made Of Spring Stainless Steel Spring Aisi 301 Of 0,8 Mm Of Thickness.Mechanical Resistance 1269 Nw/Mm2 Close To The One Of The Rod Itself.The Size …

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI 630 steel tempered through a special process that maintains a high elastic memory with a hardness level between 44 and 46 Rockwell.AISI 301 stainless steel spring winglet 0.8 mm thick.Mechanical resistance close to that of the rod itself.O-ring for sealing the standard winglet (red color).Extraordinary resistance to breakage in the opening direction of the notch of 190 Nw and 40º of angle.Completely nuanced bronze finish to avoid glare and with a personalized logo.Reinforced lugs with curved machining radius.Versatile design for metallic and Dyneema wishbones.Specially resistant and highly penetrating shell-shaped tip.Available diameters:Ø6.25 mm, Ø6.70 mm and Ø7.50 mm.Measurements:110, 115…

AISI Tempered Steel 302.Polyvalent hydrodynamic low studs metal howitzers or Dyneema.

As an angler you can rely on the Base-X landing net series from DAM at all times to be able to securely land the fish whenever you want to. The DAM Base-X telescopic landing net series consists of extremely reliable nets that are made of durable high grade materials and designed for quick and easy handling. Next to the improved locking system on the telescopic handle part, the nets feature the revolutionary quick-dry mesh. Available in two-piece telescopic handles, in the most common lengths and head sizes. So there is a DAM Base-X net for everyone. Designed in: Germany Dimensions: 50 x 50 x 40 cm Colour: Black Made in: China Material: Nylon Variant: Landing Net Transport Length: 63 cm Number …

The ribs of the DAM DETEK Inline Method Feeder are ideally suited to safely transport both method groundbait and soaked pellets to the fishing spot.Once at the bottom of the water, the DETEK Inline Method Feeder quickly releases its load, the fish can quickly find and suck in the groundbait and, of course, the hook bait.In connection with our Method Feeder Mold in the appropriate size, weights of the same size are always achieved, which enables precise casting.The aerodynamic design makes accurate throwing easier.Instead of the swivel, our DAM DETEK Quick Change Bead can also be used.

The ribs of the DAM DETEK Inline Method Feeder are ideally suited to safely transport both method groundbait and soaked pellets to the fishing spot.Once at the bottom of the water, the DETEK Inline Method Feeder quickly releases its load, the fish can quickly find and suck in the groundbait and, of course, the hook bait.In connection with our Method Feeder Mold in the appropriate size, weights of the same size are always achieved, which enables precise casting.The aerodynamic design makes accurate throwing easier.Instead of the swivel, our DAM DETEK Quick Change Bead can also be used.

Fully adjustableHeavy dutyDurable composite materialPerfect for deep sea fishing Designed in: United Kingdom Material: PVC Colour: White Original Colour by Producer: White Made in: China