Car Bulbs

Bulb type: P21W Rated power [W]: 21 Voltage [V]: 12

Great Product

High light values (20.4 lux) for illuminating the boot. There is no glare due to the lower light values when illuminating the footwell. The use of LEDs leads to an indirect reduction in CO2 emissions. Length: 62mm - Width: 25mm - Height: 22.6mm ECE approved Electromagnetic Compatibility (EMC) Number of LEDs: 2

By combining energy-efficient LEDs and the use of precision optics, HELLA signal luminaires achieve a greater signalling effect with energy savings of over 90% compared with incandescent lamps These aesthetically pleasing luminaires are characterised by simple installation, long-term UV resistance, extremely low power consumption and robust multi-volt circuits The use of Grilamid, a revolutionary and high-performance plastic for the lens, is unique in the industry. The luminaires are tested according to HELLA standard 67101 and meet the requirements for buses, commercial vehicles, trucks and tractors over 6.5 tonnes The luminaires are completely sealed to IP 6K7 and IP 6K9K and are resistant …

Thanks to its innovative design, this rubber arm clearance light is highly resistant to vibration and shock The rubber arm always returns to the "0" position even in the event of impact, allowing the luminaire to remain stable even at higher speeds The luminaire head is specially protected against damage by rubber edging Compared to incandescent lamp versions, these LED versions are characterised by low power consumption and a longer service life Clear-glass lens made of shatterproof PMMA Lamp Type: LED - Number of LEDs: 4 - with pipe Light functions: 3 - with position light (LED)/with taillight (LED)/with side marker light (LED)

Thanks to its innovative design, this rubber arm clearance light is highly resistant to vibration and shock The rubber arm always returns to the "0" position even in the event of impact, allowing the luminaire to remain stable even at higher speeds The luminaire head is specially protected against damage by rubber edging Compared to incandescent lamp versions, these LED versions are characterised by low power consumption and a longer service life Clear-glass lens made of shatterproof PMMA Lamp Type: LED - Number of LEDs: 4 - with pipe Light functions: 3 - with position light (LED)/with taillight (LED)/with side marker light (LED)

Contents: pack of 2 Turn Lights as described

The new development enables maximum performance with minimalist design, because the beacon does not require a classic light dome The light is visible through a circular light band Despite its minimal light emission area, the beacon emits a clearly visible flashing warning signal and complies with European Directive ECE-R65 for use on public roads The LED technology, the materials used and the design ensure a very long service life and guarantee long-term functional reliability Further advantages are the protection against water and dust as well as the excellent electromagnetic compatibility (EMC) Lamp Type: LED - Number of LEDs: 32 - Power consumption: 38W With flashing warning signal …

Can be synchronised with two or more units Besides continuous light, four different flash patterns (single, double, triple and quadruple flash) can be set Tested and approved according to the European Directive for beacons (ECE-R65 ) Integrated day / night mode Slim version with an installation height of only 12.8 mm Lamp Type: LED - Number of LEDs: 3 - Power consumption: 14W With flashing warning signal - Lens Colour: Crystal clear - LED colour: Blue - Fastening Type: for horizontal fastening

Additional, directional front signal as a supplement to the beacon Ideal for covert operations Suction cups for quick attachment Lamp Type: LED - Number of LEDs: 3 - Power consumption: 10W With flashing warning signal - Lens Colour: Blue/Crystal clear Housing material: PC (Polycarbonate) - Housing Colour: Black - Diffusing Lens Material: PC (Polycarbonate)

The beacon with flashing light function has an impact-resistant polycarbonate light dome As the LEDs are maintenance-free, no additional spare parts are required The new KLX 1 LED beacon is dustproof to IP 67 and IP X9K protection classes, protected against temporary immersion in water and resistant to high-pressure cleaning Designed for use on industrial trucks, factory traffic etc. Service life is reduced to a minimum The beacon is equipped with reverse polarity protection. Even if the connecting cables are interchanged, there is no danger to the electronics Lamp Type: LED - Number of LEDs: 8 With flashing warning signal - Lens Colour: Red

The K-LED 2.0 R can switch between a rotating or flashing warning signal by programming A sensor measures the ambient brightness and controls the change between day / night level based on the measured values. This guarantees you the best possible warning effectiveness The beacon has been developed without moving parts and thus offers optimum protection against strong vibrations and shocks The K-LED 2.0 is characterised by a long service life The impact-resistant, extremely flat polycarbonate light dome guarantees particularly reliable protection against knocks, e.g. from branches Lamp Type: LED for indicator (LED)/With flashing warning signal - Lens Colour: Yellow - LED colour: White

The K-LED 2.0 F can switch between a rotating or flashing warning signal by switch or programming A sensor measures the ambient brightness and controls the change between day / night level based on the measured values. This guarantees you the best possible warning effectiveness The beacon has been developed without moving parts and thus offers optimum protection against strong vibrations and shocks The K-LED 2.0 is characterised by a long service life The impact-resistant, extremely flat polycarbonate light dome guarantees particularly reliable protection against knocks, e.g. from branches Lamp Type: LED - Number of LEDs: 20 - Power consumption: 30W With flashing warning signal - Lens …

The K-LED 2.0 F can switch between a rotating or flashing warning signal by switch or programming A sensor measures the ambient brightness and controls the change between day / night level based on the measured values. This guarantees you the best possible warning effectiveness The beacon has been developed without moving parts and thus offers optimum protection against strong vibrations and shocks The K-LED 2.0 is characterised by a long service life The impact-resistant, extremely flat polycarbonate light dome guarantees particularly reliable protection against knocks, e.g. from branches Lamp Type: LED - Number of LEDs: 20 With flashing warning signal - Lens Colour: Green - LED colour: …

& # x2022. S1 & # x2022. Wattage: 25/25 W & # x2022. Voltage: 12 V & # x2022. Base: BA20d

Innovative wide-area LED light guide for the taillight function, combined with reflector Thanks to particularly homogeneous illumination, the taillight function is particularly well visible in the dark over a large area - for greater road safety The luminaire is characterised by a long service life, low life cycle costs and high robustness Tested to IP 6K9K, this luminaire is protected against the ingress of dust and water when permanently submerged. Consequently, it also withstands high-pressure cleaning Overvoltage protection ensures that the luminaire is not damaged even during voltage peaks according to ISO 7637 Length: 300mm - Width: 130mm - Height: 40mm - Lamp Type: LED - Number of …

Uniform appearance of the lighting functions taillight and stoplight Economically attractive use of LED technology for continuous light functions Taillight and brake light with long service life Reverse polarity protection: Incorrect contact between poles ensures that the luminaire is not damaged Sealed to withstand high pressure cleaning: Tested according to HELLA standard 67101, IP 6K9K, protected against high pressure and steam jet cleaning High resistance to vibration: The luminaires are tested according to HELLA standard 67101 class 7 2 and are therefore approved for use with agricultural and construction machinery Length: 112mm - Height: 49mm - Lamp Type: LED - Number of LEDs: 30 …

Flexible design with the classic straight Shapeline Tech Design and the curved dynamic Shapeline Style Design Wide range of functions thanks to numerous LED lighting functions that can be combined in different, individual ways High recognition value thanks to unique yet consistent light signature LED technology ensures long service life and energy efficiency Simple and safe installation Length: 62mm - Width: 40mm - Height: 18mm - Lamp Type: LED - Number of LEDs: 1 - with overvoltage protection Light functions: 1 - with taillight (LED)

The new development enables maximum performance with minimalist design, because the beacon does not require a classic light dome The light is visible through a circular light band Despite its minimal light emission area, the beacon emits a clearly visible flashing warning signal and complies with European Directive ECE-R65 for use on public roads The LED technology, the materials used and the design ensure a very long service life and guarantee long-term functional reliability Further advantages are the protection against water and dust as well as the excellent electromagnetic compatibility (EMC) Lamp Type: LED - Number of LEDs: 32 - Power consumption: 13W With rotating warning signal …

The RotaLED Compact is the LED successor to the existing halogen beacon series Rotafix, Rotaflex and Rota Compact. These are 1:1 interchangeable Signal generation by means of electronic concept, without moving parts Compact design Impact-resistant polycarbonate light dome Dust-tight, resistant to high-pressure cleaners and protected against immersion to a depth of 1 m Lamp Type: LED - Number of LEDs: 16 - Power consumption: 7W With rotating warning signal/with indicator (LED) - Lens Colour: yellow (amber) - LED colour: White

Narrow roof beam with a height of only 49 mm (without bracket) Micro variant with a width of 255 mm and a depth of 165 mm Multivolt (10 - 30 V) Flashing or rotating light function Lamp Type: LED With rotating warning signal/With flashing warning signal - Lens Colour: Crystal clear - LED colour: Yellow - Fitting Position: mounting SAE approved - Prot.type (IP Code): 6X, X4K, X9K

The highly specular reflector ensures optimum luminous efficiency The fixed H1 bulb enables low-maintenance and robust operation Compact beacon for robust applications Lamp Type: H1 - Power consumption: 55W With rotating warning signal - Lens Colour: Yellow SAE approved - Prot.type (IP Code): IPX9K/IP5K4K Housing material: EPDM (ethylene propylene diene Monomer (M-class) rubber) - Housing Colour: Black - Diffusing Lens Material: PC (Polycarbonate)

Active thermal management: The use of thermally conductive materials and the special arrangement of the components means that the heat is carried away from the LEDs and their service life is extended An innovative electronic concept enables the lighting function without moving parts The impact-resistant and dirt-resistant light dome ensures an optimum warning effect at all times Previous models KL 700 Halogen or KL 7000 Halogen can easily be converted to the KL 7000 LED The beacon has low power consumption and a high light output ratio thanks to the rotating lighting function With rotating warning signal - Lens Colour: Red Prot.type (IP Code): IPX9K/IP5K4K

Halogen rotating beacon Generates a rotating warning signal by means of a highly polished parabolic reflector and incandescent lamp Protected against dust and splash water Lamp Type: H1 - Power consumption: 55W With rotating warning signal - Lens Colour: Blue Prot.type (IP Code): IPX9K/IP5K4K Housing material: PC (Polycarbonate) - Housing Colour: Black - Diffusing Lens Material: PMMA (Polymethylmethacrylate)