Chimneys Clarke

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamel, and conforming precisely to all relevant quality standards.

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

Designed to connect, and firmly join the Clarke stoves listed below with the flue pipe. Made from quality vitreous enamel, and conforming precisely to all relevant quality standards.

This adjustable radiation shield may be extended to suit the joist height and is set at a diameter to fit between the outter flue casing and the joist box. Should be used in conjunction with a Ventilated Fire Stop. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

Designed to connect, and firmly join the Clarke stoves listed below with standard 5" flue pipe. Made from quality vitreous enamelled steel, and conforming precisely to all relevant quality standards.

This Storm Collar should be fitted above the flashing (Roof Plate) to prevent water entering between the outter skin of the flue and the flashing. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending on which stove you have purchased. Each stove product page has a link to which of the two stainless steel flue connectors you will require for your installation. All stainless steel twin wall flue systems are 6" (150mm) in diameter.

This Wall band is used to provide lateral support for a vertical flue, giving 50mm clearance from a non-combustable wall.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6" depending

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS4543 Parts 2 & 3 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

This adjustable Wall band is used to provide lateral support for a vertical flue, giving between 50mm -100mm clearance from a non-combustable wall.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

This adjustable Roof Plate (Flashing) is designed to be installed under your roof slates or tiles to help maintain a weatheproof seal around the flue. Should be used in conjunction with a Storm Collar to complete the installation.

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.

Flue cowls are designed to be fitted outside to chimney and flue tops to prevent rain, moisture and debris from falling into your fire or stove.

A top quality stainless steel, high temperature insulated twin wall flue pipe, guaranteed for 10 years against defects due to faulty manufacture. This stainless steel system consists of a 25mm high density insulated core surrounded by 316 grade inner liner is 0.5mm thick, (25% thicker than some products) and the 304 grade outer casing is 0.5mm thick. They are BSRIA approved to BS EN 1856 Parts 1 & 2 and HETAS approved for solid fuel burning. It is supplied with a bright Annealed Mirror Finish. PLEASE NOTE - We recommend a minimum of 1 metre vitreous flue pipe LINK is installed between the stove and stainless steel twin wall system. Your vitreous flue pipe will either be 5" or 6"

Designed for use with the Clarke stoves listed below. Made from steel with a quality vitreous enamel coating, and conforming precisely to all relevant quality standards.