Pliers

Reinforced type, for tough continuous operations Lay-on cutter box For flat and round material For medium-hard wire 1.6 mm Induction-hardened precision cutting edges, hardness 62 - 64 HRC GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed JC = chrome-plated, with 2-component handles TL = steel-grey, with blue dipped non-slip handles TL = steel-grey, with blue dipped non-slip handles

70 01 180 SB Diagonal CutterThe indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Narrow head style for use in confined areas. self-service card/blister. Cutting capacities soft wire (diameter): Ø 4.0 mmCutting capacities medium hard wire (diameter): Ø 3.0 mmCutting capacities hard wire (diameter): Ø 2.5 mm

Combination Pliers

Knipex 7806125 Electronic Super Knips VDE 1000V 125mm The Knipex 7806125 Electronic Super Knips are made from INOX tool steel with a polished head. The handles are VDE insulated to 1000V with multi-component grips. Very small pliers for the most detailed work. Features:
- Precision pliers for ultra fine cutting work, e. g. in electronics and fine mechanics
- Ground, very sharp cutting edges without bevel
- Shear cut with controlled micro cutting edge misalignment for the most precise cutting of even the thinnest of wires and for a long service life
- Precision shaped tips cut wires resting on a board from 0.2 mm dia.
- Joint with stainless steel rivet
- Extremely smooth movement …

The Bahco ERGO™ Side Cutting Pliers are made from high-performance steel, with a black anti-corrosion finish and edges which are induction hardened at 62 HRC. They have 2-component combination handles - thermoplastic surface on tough polypropylene which gives a superior grip. Progressive edges allow the cutting radius along the edge in order to cut hard material like piano wire close to the joint and soft materials like copper and plastic insulated wire at the tip. The screw joint provides excellent running and accurate alignment of the cutting edges. The distance from the joint to the centre of the cutting edges is reduced, giving greater leverage and increased cutting capacity. The round …

74 01 160 SB High Leverage Diagonal CutterFor very tough, continuous use. High cutting performance with minimum effort due to optimum coordination of the cutting edge angle and transmission ratio. Precision cutting edges additionally induction-hardened (cutting edge hardness approx. 64 HRC), for all sorts of wire including piano wire. self-service card/blister. Cutting capacities medium hard wire (diameter): Ø 3.4 mmCutting capacities hard wire (diameter): Ø 2.5 mmCutting capacities piano wire (diameter): Ø 2.0 mm

Circlip Pliers / 140 mm Length

The Knipex 99 14 250 SB concreters nippers offer high leverage transmission for the most demanding applications They require 25% less effort compared to conventional concreters' nippers of the same size and are zinc plated for excellent corrosion resistance and long life. They are typically suited to cutting different types of wire and do so with ease. Sold with hang tab packaging as shown in picture. Features:
- 25% less effort required compared to conventional concreters' nippers of the same size
- Extra-slim form for tying deep mounted steel rods
- To lace concrete reinforcing steel with binding wire from a roll
- Wire is twisted and cut in a single pass
- High-leverage joint, …

Electronic Super Knips are precision pliers for ultra fine work with a smooth movement for minimum operator fatigueThe Knipex 7861125SB (Carded) Electronic Super Knips are 125mm in length and have extremely sharp cutting edges made of induction hardened special tool steel. The cutting edges are ground without bevel for flush cutting and are induction hardened to approx. 64 HRC. Suited to accurately cutting fine wires, e.g. that are touching enclosures and components, thanks to precision tips. Great dexterity is needed when working on electronic components and in precision mechanics. Due to its frictionless handle spring, the Knipex Electronic Super Knips are so smooth-running that energy can …

Stanley MR55 All steel riveter with an easy spring-loaded handle, which ejects the rivet stem. It has 4 nosepieces and a wrench store in the handle for versatility and convenient storage and accepts 3, 4, and 5mm aluminium and steel rivets for a wide range of applications. Rugged steel construction for long-lasting durability.Additional Information:• Tool/Spares: Rivet Tool• Type: Fixed Head

Universal model with slimline head, ideal for confined spaces Induction-hardened precision cutting edges, hardness 62 - 64 HRC For flat and round material For medium-hard wire, 1.6 mm GEDORE special hardened and tempered steel, drop-forged, oil-hardened and annealed JC = chrome-plated, with 2-component handles TL = steel-grey, with blue dipped non-slip handles TL = steel-grey, with blue dipped non-slip handles

Bahco Side Cutting Pliers for cutting hard materials such as piano wire, copper wire and plastic insulated wire. They are made form high performance alloy steel and have two-component handles for comfort.Length: 160mm (6 1/4 in). Cutting capacity:2.5mm.Additional Information:• Size: 160mm (6.1/4in)• Handle: 2-Component

The Knipex 26 21 200 bent long nose side cutters have long flat round jaws that are highly loadable, with elastic precision points with blades for hard wire diameter up to 2.2mm and medium wire diameter up to 3.2 mm. The cutting edges are separately induction hardened for durabilty and longer working life and are hardend to approximately 61HRC. The jaws are angled at 40 and are ideal for use on electronic or tight to reach areas on computers, circuitry, or motor vehicles applications. Knipex have used a good quality special tool steel material that is oil hardened. Dipped handles. Length 200mm (8 in). Hard wire diameter 2.2 mm. Medium wire diameter 3.2 mm.

Circlip Pliers / 210 mm Length

Cable Shears / 165 mm Length

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 31 series of external bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45 bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Size 210mm Shaft size 40-100mm

Circlip Pliers / 140 mm Length

Diagonal cutting nippers, bi-material handles.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left}.tg .tg-0lax{text-align:left;vertical-align:top} Product Code Part Number L L1 Capacity (dia) A S Weight mm mm mm mm mm g 010820034 1082BM 140 140 20 1.6 25 11 160 010820036 1082BM 160 160 22 1.6 28 12 215

Circlip Pliers

The C.K 430008 Cable Snips Cutting Tool is ideal for the fast and efficient cutting of aluminium & Copper wires and plastic sheathed cables. Designed for fast and efficient cutting of aluminium & copper wires and plastic sheathed cables. Stainless steel razor sharp shearing blades for outstanding cutting performance. Spring assisted blade opening with safety closing catch for convenience. PVC coated handles for comfort and grip. Aluminium cutting capacity of 10mm Copper WIre cutting capacity of 10mm Overall length of 165mm This product can be used alongside the Automatic Wire Strippers for both flat and round cable.

Bahco Long Nose Pliers developed according to the scientific ERGO™ process. The handles allow the vast majority of users to apply the greatest possible force with the least possible effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. Have serrated jaws, and they have a black oxidised and anti-corrosion treated finish. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper and plastic insulated wire.1 x Bahco 2430G ERGO™ Long Nose Pliers 200mm (8in)Additional Information:• Type: Long Nose• Size: …

Top Cutter 180mmC.K Top Cutters 180mm~ High alloy steel, drop forged, hardened & tempered for strength & durability~ Induction hardened jaws for outstanding long term cutting performance~ Wipe clean PVC handles for added convenience~ Black lacquered for corrosion protection. ~ Cutting capacities wire: Hard: 2,5 mm / Medium hard: 3,2 mm / Soft: >4,0 mm~ Overall length: 180 mmTechnical DataSize: 180mm (7")Hard wire: 2.5mmMedium wire: 3.2mmSoft wire: >4.0mmTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoDimensions: …

70 02 140 SB Diagonal CutterThe indispensable diagonal cutter for all-round use. High-quality material and precise workmanship for long service life. Precision cutting edges for soft and hard wire. Clean cutting of thin copper wires, also at the cutting edge tips. Cutting edges additionally induction-hardened, cutting edge hardness approx. 62 HRC. Narrow head style for use in confined areas. with bevel. self-service card/blister. Cutting capacities soft wire (diameter): Ø 4.0 mmCutting capacities medium hard wire (diameter): Ø 2.5 mmCutting capacities hard wire (diameter): Ø 1.8 mm

• Heavy duty construction, drop forged alloy steel, hardened & tempered for exceptional strength & durability • Induction hardened specially profiled shearing blades for clean cutting • For a range of wire & cables including: bowden cable, steel wire, fencing wire; stranded wire rope, copper & aluminium cables, steel rods, etc • PVC coated handles for comfort and grip • Overall length: 190 mm Specifications: Size = 190mm Mild steel (standard) = 6mm High tensile steel (standard) = 4mm