Pliers, Wire Cutters & Cable Cutters

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred precision-machined pivot pins not only allow a smooth one-handed operation and minimum play for ease of use, but increases the ease of cutting harder wires. Two part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC.

Exhaust pipe cutter pliers designed to cut single-wall pipes up to 83mm diameter. There are 15 steel cutting discs, and it takes just a 90 degree turn to make a complete cut, making this an ideal tool for working in confined spaces. Cutting oil is needed for effective use. Not to be used on stainless steel exhaust pipes.

Features:- Minimal cutting effort required - blades sharpened after heat treatment for maximum effectiveness- Offset pivot for max power- 60/62HRc High frequency hardened cutting edge for longer working life

FEATURES:- Sharp, ground cutting edges without facette- Cutting through even adjacent wires from 0.2 mm- Hinge with stainless steel rivet- 54 HRC Blade hardness- With opening limiter and opening spring

Expert quality XP1000®, manufactured from premium steel forged in Germany. Induction-hardened jaws provide ultimate effortless clean cutting and long-term performance. The off-centred, precision-machined pivot pins not only allow smooth one-handed operation with minimum play for ease of use, but also increase the ease of cutting harder wires. A two-part bi-material ergonomic soft grip handle allows maximum grip and user comfort, and horns prevent slipping onto live conductors. Tested to 10,000V, these pliers are suitable for working on live circuits of 1,000V AC and 1,500V DC. The handle also incorporates a tethered fixing solution to comply with Work at Height Regulations (lanyard Stock …

Expert Quality, manufactured from chrome nickel steel hardened and tempered with two hardened cutting zones - one for fine cable and the other for 6mm cable. Polished head with lacquered finish. Special non slip cushion - grip handles. Display packed.

These Roughneck Professional Bolt Cutters have Chrome Molybdenum steel jaws for quality and durability. Tubular steel handles offer strength while being lightweight. Compound action to increase leverage. Centre cut for general applications such as cutting chains, padlocks, bolts, nuts, rods and wire mesh. Easily adjustable jaws for quick re-alignment. Large double injected soft-grips for comfort.Size: 450mm (18in).Blade thickness: 8mm.Cutting tip length: 32mm.Max cutting diameter: 6mm.Additional Information:• Size (mm): 450• Size (in): 18• Cutting Capacity (mm): 8

78 61 140 SB Electronic Super Knips® XLAdditional 15 mm longer version: greater stability, greater cutting performance. Precision-ground cutting edges without bevel for precise and flush cutting of the finest wires, e.g. in electronics and fine mechanics. Precisely shaped tips cut wires close to a surface from Ø 0.2 mm. With opening spring and opening limiter for comfortable, ergonomic and fast working thanks to automatic opening and comfortable handle width. Extremely easy movement for fatigue-free work due to precise joint with stainless steel rivet. High load capacity, made of burnished special tool steel, cutting edges additionally induction-hardened to 64 HRC. self-service card/blister. C…

Milwaukee Heavy Duty Forged Steel Bolt Cutter designed with a strong and durable cutting edge. Comfort grip handles that will not peel or slide off and a blade adjustment screw ensures high performance and longer life. Specifications • Blade width: 13mm • Length: 350mm • Cutting capacity for HRC 31 materials: 8mm • Cutting capacity for HRC 48 materials: 5mm Features and Benefits • Forged steel blades for strong and durable cutting edge • Comfort grip handles will not peel or slide off • Blade adjustment screw ensures high performance and longer life • Lanyard holes

End Cutting Nippers for cutting wire, the cutting edge is at 90 degrees to the handle, allowing very close cropping of wire. Will cut piano wire and softer wire such as iron wire. Phosphated, anti-corrosion treated finish with handles coated in PVC.Length: 160mm (6 1/4 in).Cutting capacity: 2.0mm piano wire.Additional Information:• Length (mm): 160• Length (in): 6.1/4• Handle Type: PVC Dipped

99 14 300 SB High Leverage Concreters' Nipper25 % less effort required compared to conventional concreters' nippers of the same size. extra-slim form for tying deep mounted steel rods. To lace concrete reinforcing steel with binding wire from a roll. Wire is twisted and cut in a single pass. High-leverage joint, minimising strain, even when thick binding wires are used. The high damping of the cutting stroke on cutting through the binding wire reduces the strain on tendons and muscles. Cutting edges additionally hardened; cutting edge hardness approx. 61 HRC. self-service card/blister. Cutting capacities hard wire (diameter): Ø 2.0 mmCutting capacities medium hard wire (diameter): Ø 3.8 mmCutting ed…

• A quick and effective way of crimping battery terminals using either a hammer or vice.• Wide throat and spring controlled punch securely holds terminal in place for added security.• Compatible with battery terminals with a cross sectional area of 6, 10, 16, 25, 35 and 50mm².A quick and effective way of crimping battery terminals using either a hammer or vice. Wide throat and spring controlled punch securely holds terminal in place for added security. Compatible with battery terminals with a cross sectional area of 6, 10, 16, 25, 35 and 50mm².• A quick and effective way of crimping battery terminals using either a hammer or vice. • Wide throat and spring controlled punch securely h…

49 21 A11 SB Precision Circlip Pliersheavy duty in continuous operation: up to 10 times longer service life compared to turned tips. With inserted tips for reliable work. Large contact faces on the tips: no distortion of circlips, easy fitting. Bolted joint: precise, zero backlash operation of pliers. Internal opening spring, protected and captive. Non-slip plastic coating on the handles. angled tips. self-service card/blister. Size of shaft: Ø 10 – 25 mmTips (diameter): 1.3 mm

Bahco Side Cutting Pliers for cutting hard materials such as piano wire, copper wire and plastic insulated wire. They are made form high performance alloy steel and have two-component handles for comfort.1 x Bahco 2171G Side Cutting Pliers 180mm (7in)Additional Information:• Size (mm): 180• Size (in): 7• Handle Type: 2-Component

FEATURES:- Suitable for permanent use- Low power consumption and high cutting performance thanks to optimally matched cutting angle and transmission ratio- For all wire types including piano wire

Expert Twin Slip Joint Multigrip Pliers have ergonomic, bi-material handles for comfortable use. They feature a patented pushlock button and have 17 joint positions. The pliers have a black chromium finish and conform to ISO 8976 specifications. Specifications • Length: 311mm • Jaw Depth: 69mm • Weight: 304g

Lightweight and compact wire rope cutters for wire rope with 4.00 / 1960 Nmm. Features and benefits Double-mounted box joint design for high level of stability Cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC Convenient work thanks to opening spring Secured by locking device during transport Ball bearing steel

The Stanley FatMax® VDE Maxsteel Waterpump Pliers are made from a heat treated, high chrome steel forging for long life and with hand ground induction hardened blades. DIN /ASO/ANSI compliant. For gripping a variety of electrical fittings or assembly components. Approved for working around live circuits that do not exceed 1,000 volts. Compliant to EN60900, IEC/CE1900/VDE0680.Additional Information:• Length (mm): 255• Jaw Capacity (mm): 33

Knipex have used special tool steel construction with PVC dipped handles for added comfort, durability and most important added grip. The Knipex 46 31 series of external bent circlip pliers are constructed from chrome vanadium solid style forged top quality steel with precision non-slip tips for added strength and durability. They have 45 bent tips. Like most of the Knipex range of pliers, all components are oil hardened with polished heads. These circlip pliers have PVC dipped handles for added comfort, durability and, most importantly, added grip. Size 210mm Shaft size 40-100mm

48 11 J3 SB Precision Circlip Pliersheavy duty in continuous operation: up to 10 times longer service life compared to turned tips. With inserted tips for reliable work. Bolted joint: precise, zero backlash operation of pliers. Non-slip plastic coating on the handles. DIN 5256 C, straight tips. self-service card/blister. Size of bore: Ø 40 – 100 mmTips (diameter): Ø 2.3 mm

46 21 A31 SB Circlip PliersSolid style, forged. Non-slip, solid tips. DIN 5254 B; 90° angled tips. self-service card/blister. Size of shaft: Ø 40 – 100 mmTips (diameter): Ø 2.3 mm

FEATURES:- For versatile use- Precise processing and high-quality material- Inductively hardened cutting edges with a cutting hardness of approx. 62 HRC- Slim head shape for use in working areas that are difficult to access- Clean cut also at the cutting tips

Bahco End Cutter Fencing Pliers which are phosphated, anti-corrosion treated and have a cutting capacity on iron wire up to 2.5mm maximum. Made from chrome vanadium steel with plastic coated handles.Additional Information:• Length (mm): 225• Length (in): 8.3/4

48 21 J11 SB Precision Circlip Pliersheavy duty in continuous operation: up to 10 times longer service life compared to turned tips. With inserted tips for reliable work. Bolted joint: precise, zero backlash operation of pliers. Non-slip plastic coating on the handles. angled tips. self-service card/blister. Size of bore: Ø 12 – 25 mmTips (diameter): Ø 1.3 mm