Vises & Clamps

Replaceable jaw plates are available for all Mechanics, Fitters, multi-purpose and Engineers vices. They are hardened, CNC machined and supplied in pairs complete with screws or bolts and ready to fit. Replaceable jaw plates for No.5 vice. Jaw Width. 125mm (5 in).

Irwin Record No. T414 Drill Press Vice by Zoro Select

IRWIN Record Mechanic's Vice is rigid and robust. The body and sliding jaw are cast from close grained grey iron which is machined on all friction surfaces for a smooth, reliable action. Fitted with hardened steel jaws for extended life, they can be replaced when worn. The main steel screw has a two-start rolled acme thread for faster and smoother operation. It has a fused steel handle that will bend before the vice can be overstressed. A safety stop prevents the slide from being separated from the body. The most popular and widely used general purpose vice for light to medium-duty applications. A full line of replacement parts are available. The IRWIN Record No.1 Mechanic's Vice has the following …

IRWIN QUICK-GRIP Quick-Change Medium-Duty Bar Clamps can be converted from a clamp to a spreader in seconds, with a clamping hold load of 136kg. The lockable swivel jaw enables uneven surfaces to be clamped and it is fitted with square XP-style protective pads to protect the work surface from damage. Enhance your clamps with a wide range of QUICK-GRIP Clamp Accessories. This IRWIN QUICK-GRIP Quick-Change Medium-Duty Bar Clamp has the following specification Clamping Capacity 300mm (12in) Spreading Capacity 515mm (20in) Clamping Force 136kg Pack Quantity 2

The IRWIN® Quick-Grip® Hybrid Trigger Clamp combines the benefits of a one-handed bar clamp with the strength of a traditional F-clamp. Its 63.5mm throat depth allows you to clamp in hard to reach difficult areas. Glue resistant pads allow for easy clean up, they also help to prevent marking delicate work surfaces. Fitted with a rubber overmould grip for added comfort and control. Specification: Clamping Force: 136kg.1 x IRWIN® Quick-Grip® Hybrid Trigger Clamp 600mm.Additional Information:• Capacity (mm): 600• Clamping Force (kg): 136

The IRWIN® Quick-Grip® Hybrid Trigger Clamp combines the benefits of a one-handed bar clamp with the strength of a traditional F-clamp. Its 63.5mm throat depth allows you to clamp in hard to reach difficult areas. Glue resistant pads allow for easy clean up, they also help to prevent marking delicate work surfaces. Fitted with a rubber overmould grip for added comfort and control. Specification: Clamping Force: 136kg.1 x IRWIN® Quick-Grip® Hybrid Trigger Clamp 450mm.Additional Information:• Capacity (mm): 450• Clamping Force (kg): 136

The IRWIN® Quick-Grip® Hybrid Trigger Clamp combines the benefits of a one-handed bar clamp with the strength of a traditional F-clamp. Its 63.5mm throat depth allows you to clamp in hard to reach difficult areas. Glue resistant pads allow for easy clean up, they also help to prevent marking delicate work surfaces. Fitted with a rubber overmould grip for added comfort and control. Specification: Clamping Force: 136kg.1 x IRWIN® Quick-Grip® Hybrid Trigger Clamp 300mm.Additional Information:• Capacity (mm): 300• Clamping Force (kg): 136

The Hultafors CFP Screw Clamp has a steel rail forged in one piece, profiled, nickel and chrome plated. It also features a strong flat threaded, black phosphate screw with tilted pressure plate. The slim front anvil allows for increased access in narrow places, while the pivoting handle provides increased clamping pressure. Specification: Clamping Force: 700kg.This Hultafors CFP Screw Clamp has the following specifications: Clamping Capacity: 400mm (16in).Throat Depth: 175mm.Rail Dimensions: 27 x 13mm.Weight: 2600g.Additional Information:• Capacity (mm): 400• Throat Depth (mm): 175• Weight (kg): 2.6

The Hultafors CFP Screw Clamp has a steel rail forged in one piece, profiled, nickel and chrome plated. It also features a strong flat threaded, black phosphate screw with tilted pressure plate. The slim front anvil allows for increased access in narrow places, while the pivoting handle provides increased clamping pressure. Specification: Clamping Force: 700kg.This Hultafors CFP Screw Clamp has the following specifications: Clamping Capacity: 300mm (12in).Throat Depth: 140mm.Rail Dimensions: 25 x 12mm.Weight: 1950g.Additional Information:• Capacity (mm): 300• Throat Depth (mm): 140• Weight (kg): 1.95

The Hultafors CFP Screw Clamp has a steel rail forged in one piece, profiled, nickel and chrome plated. It also features a strong flat threaded, black phosphate screw with tilted pressure plate. The slim front anvil allows for increased access in narrow places, while the pivoting handle provides increased clamping pressure. Specification: Clamping Force: 700kg.This Hultafors CFP Screw Clamp has the following specifications: Clamping Capacity: 200mm (8in).Throat Depth: 100mm.Rail Dimensions: 19.5 x 9.5mm.Weight: 1050g.Additional Information:• Capacity (mm): 200• Throat Depth (mm): 100• Weight (kg): 1.05

• Suitable for installation of upholstery hog rings, commonly found on vehicles upholstery.• Cupped and spring loaded jaws hold hog rings in place during installation.• Features PVC dipped handles for added comfort.Suitable for installation of upholstery hog rings, commonly found on vehicle's upholstery. Cupped and spring loaded jaws hold hog rings in place during installation. Features PVC dipped handles for added comfort.• Suitable for installation of upholstery hog rings, commonly found on vehicles upholstery. • Cupped and spring loaded jaws hold hog rings in place during installation. • Features PVC dipped handles for added comfort. • Model No. HRP002Technical Specification:Length: 180mmNett Weig…

The Faithfull Hobbyists Clamp has a slim compact section design that is an advantage in a limited space. The high-quality cast body provides strength and durability. The handle, screw and swivel pad are plated to resist rust. Ideal for the craftsman or DIY enthusiast. Capacity 75mm (3in) Throat depth 32mm (1.1/4in)

The Faithfull Hobbyists Clamp has a slim compact section design that is an advantage in a limited space. The high-quality cast body provides strength and durability. The handle, screw and swivel pad are plated to resist rust. Ideal for the craftsman or DIY enthusiast. Capacity 51mm (2in) Throat depth 22mm (7/8in)

The Faithfull Hobbyists Clamp has a slim compact section design that is an advantage in a limited space. The high-quality cast body provides strength and durability. The handle, screw and swivel pad are plated to resist rust. Ideal for the craftsman or DIY enthusiast. Capacity 25mm (1in) Throat depth 16mm (5/8in)

This 6-panel monitor stand allows the connection of flat panel monitors through standard VESA mounting brackets. Our revolutionary hinge modules are designed to enable display monitors to be rotated swiveled and tilted. The engineering of the AMR6C is designed to meet high ergonomic expectation conserving space and not compromising the aesthetics of the design. The AMR6C is constructed with aluminum alloy to insure sturdiness and allow for the mounting of individual monitors that weight 6kg (13.2 Lbs). In addition to these features the device is also compatible with VESA 100100/75X75 and suitable for monitor sizes 15 to 24.

• Heavy lift capacity.• Red line indicator warns of any vacuum loss.• Release valve lever for quick removal.• Easy attachment on smooth, non-porous flat surfaces.• Complete corrosion resistant finish.• Cup: ø206mm.• Maximum Lift Capacity: 60kg (Horizontal).• Supplied in storage case.Heavy lift capacity. Red line indicator warns of any vacuum loss. Release valve lever for quick removal. Easy attachment on smooth, non-porous flat surfaces. Complete corrosion resistant finish. Supplied in storage case.• Heavy lift capacity. • Red line indicator warns of any vacuum loss. • Release valve lever for quick removal. • Easy attachment on smooth, non-porous flat surfaces. • Complete corrosion resista…

• Heavy lift capacity.• Red line indicator warns of any vacuum loss.• Release valve lever for quick removal.• Easy attachment on smooth, non-porous flat surfaces.• Complete corrosion resistant finish.• Cup ø: 206mm.• Maximum Lift Capacity: 80kg (Horizontal).• Supplied in storage case.Heavy lift capacity. Red line indicator warns of any vacuum loss. Release valve lever for quick removal. Easy attachment on smooth, non-porous flat surfaces. Complete corrosion resistant finish. Supplied in storage case.• Heavy lift capacity. • Red line indicator warns of any vacuum loss. • Release valve lever for quick removal. • Easy attachment on smooth, non-porous flat surfaces. • Complete corrosion res…

Expert Quality, single-handed versatile clamp for spreading and clamping. Ratchet action trigger with quick-release button, soft grip handles and jaws. Display packed.

Expert Quality, single-handed versatile clamp for spreading and clamping. Ratchet action trigger with quick-release button, soft grip handles and jaws. Display packed.

Expert Quality, single-handed versatile clamp for spreading and clamping. Ratchet action trigger with quick-release button, soft grip handles and jaws. Display packed.

Powder coated steel panels with 40mm wood laminate top. Features lockable cupboard with 6-pin tumbler lock and two keys. Supplied flat-packed. Features and Benefits • Powder coated steel panels with 40mm wood laminate top. • Features lockable cupboard with 6-pin tumbler lock and two keys. • Supplied flat-packed. • Table Size (W x D): 1372 x 508mm. • Working Height: 865mm. • Model No. AP2010 Specifications Model No AP2010 Brand: Sealey Nett Weight: 37.08kg Table Size (W x D): 1372 x 508mm Working Height: 865mm Capacity: 250kg

• Manufactured from 30mm thick heavy-duty composite material, with ribbed rubber feet for added stability.• Ideal for supporting large workpieces when cutting, drilling and sawing.• Rubber ring anti-slip grips for added workpiece stability.• Four composite hooks, two either side, allow for work material to be positioned.• Fully collapsible for easy storage and transportation.• Folded (W x D x H): 690 x 60 x 840mm.• Unfolded (W x D x H): 690 x 520 x 810mm.Manufactured from 30mm thick heavy-duty composite material, with ribbed rubber feet for added stability. Ideal for supporting large workpieces when cutting, drilling and sawing. Rubber ring anti-slip grips for added workpiece stability. Four composit…

Heavy duty cast iron bench vice with fixed base and replaceable jaws. Specifications • Jaw Width: 150mm Features and Benefits • Cast iron heavy duty bench vice • Fixed base with mounting holes • Powder coated for corrosion resistance • Hardened & tempered replaceable jaws

Heavy duty cast iron bench vice with fixed base and replaceable jaws. Specifications • Jaw Width: 100mm Features and Benefits • Cast iron heavy duty bench vice • Fixed base with mounting holes • Powder coated for corrosion resistance • Hardened & tempered replaceable jaws