Cutting discs with 16 mm bore

Bosch Expert Diamond Metal 105mm 2608900531

Lasts up to 50x longer than a bonded cutting disc - Cutting metals such as steel and cast iron has traditionally been tough on angle grinder discs, and many workers are familiar with the chemical smel more→l of bonded discs burning away while they cut. With the EXPERT Diamond Metal Wheel, this smell can be consigned to the past – as can regular trips to the store to buy new metal discs. The EXPERT Diamond Metal Wheel uses Bosch Diamond Technology, which means optimum quality diamond grits fixed to a steel body. This super-hard edge lasts many times longer than even the best bonded discs, and can cut a wide variety of ferrous and non-ferrous metals with ease. It doesn’t shatter if dropped, produces no c…

Draper Metal , 100 x 1 x 16mm

from £1.00 up to £1.05

Compare prices₆→

Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

Draper Metal , 100 x 2.5 x 16mm

from £1.00 up to £1.07

Compare prices₆→

Flat cutting disc designed for fast straight cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, which h more→as been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

Draper DPC Metal , 100 x 2.5 x 16mm

from £1.00 up to £1.05

Compare prices₆→

Depressed Centre (DPC) cutting disc designed for cutting on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, whi more→ch has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine.

Draper DPC Metal Grinding Disc, 100 x 6 x 16mm

from £1.33 up to £1.49

Compare prices₆→

Depressed Centre (DPC) grinding disc designed for grinding on various metal working applications including steel, structural steel and sheet metal. Manufactured from premium quality aluminium oxide, w more→hich has been resin bonded and reinforced with fibreglass to improve the strength and performance of the disc. The bore has a stainless-steel ring to allow the cutting disc to be safely mounted onto the machine. Manufactured to EN12413 standards.

Draper Zirconium Oxide Flap Disc, 100 x 16mm, 40 Grit

from £1.39 up to £1.49

Compare prices₆→

These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.

Draper Zirconium Oxide Flap Disc, 100 x 16mm, 60 Grit

from £1.39 up to £1.46

Compare prices₂→

These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.

Draper Zirconium Oxide Flap Disc, 100 x 16mm, 80 Grit

from £1.39 up to £1.49

Compare prices₆→

These premium-quality resin-bonded zirconium oxide flap discs offer enhanced cutting performance and efficiency. They have a self-sharpening feature, which increases high stock removal and durability. more→The strong X-weight polyester-cotton backing allows flexible and fast cutting on medium to high-pressure grinding and finishing applications. The T-29 conical shape features 15–25 ° angled flaps, ideal for contoured and flat-edged work. Suitable for sanding, grinding, stock removal and weld preparation of metal, carbon steel, stainless steel, sheet metal, wood and plastic. Compatible with 100mm air angle grinders with a 16mm bore.

Faithfull Metal Cut Off Disc 100mm 3.2mm 16mm FAI1003M

from £0.95

Compare prices₃→

Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and are resin bonded to provide both safety and optimum cutting performance. Discs with a 1.2mm thi more→ckness permit fine cutting where necessary on stainless steel and high grade metals. They must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's …

Faithfull Depressed Centre Metal Cut Off Disc 100mm 3.2mm 16mm FAI1003MDC

from £0.95

Compare prices₃→

Depressed Centre Metal Cutting Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Discs wit more→h a 1.8mm thickness permit fine cutting where necessary on stainless steel and high grade metals. They have been developed to make angle grinders more versatile in use by allowing better access in some applications. Metal cutting discs must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure …

Faithfull Depressed Centre Metal Grinding Disc 100mm 5mm 16mm FAI1005MDG

from £1.49

Compare prices₃→

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

Faithfull Depressed Centre Metal Grinding Disc 100mm 6.5mm 16mm FAI1006MDG

from £1.49

Compare prices₃→

Depressed Centre Metal Grinding Discs are manufactured using Aluminium Oxide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in s more→tock removal applications on ferrous and non-ferrous metal. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. It is important to choose between a metal or stone cutting disc according to the material being cut, and to ensure that the correct wheel is properly mounted. SAFETY TIPS Read the manufacturer's instructions carefullyWear …

Faithfull Depressed Centre Stone 100mm 3.2mm 16mm FAI1003SDC

from £0.95

Compare prices₃→

Depressed Centre Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Depresse more→d centre cutting discs have been developed to make angle grinders more versatile in use by allowing better access in some applications. Stone cutting discs must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the …

Faithfull Depressed Centre Stone Grinding Disc 100mm 6mm 16mm FAI1006SDG

from £1.49

Compare prices₃→

Depressed Centre Stone Grinding Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Use in more→stock removal applications on stone and concrete. By presenting the disc to the workpiece at an angle of 45º, the most efficient results are achieved. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the …

Faithfull Porcelain Diamond Blade 105Mm FAIDB105CRP

from £10.95 up to £17.99

Compare prices₄→

Porcelain Series Diamond Blades for cutting ceramic, porcelain, granite, porcelain based paving and marble. Wet cutting is recommended for a longer blade life and dust suppression, but they can also b more→e used dry. The long-lasting, 10mm deep, continuous sintered rim enables fast and clean cuts. All blades have a centre core reinforcement plate that prevents the blade de-tensioning to increase blade life and reduce vibration. Conforms to EN 13236. Features: 10mm continuous sintered rim for fast, clean cuts Centre core reinforcement plate for reduced vibration Centre core reinforcement plate for reduced vibration Wet cutting for a longer blade life and dust suppression Conforms to EN 13236 Specifications: …

Faithfull Stone 100mm 3.2mm 16mm FAI1003S

from £0.95

Compare prices₃→

Flat Stone Cutting Discs are manufactured using Silicone Carbide abrasive grit with fibreglass reinforcing and resin bonded to provide both safety and optimum cutting performance. Stone cutting discs more→must never be used for grinding and must always be presented to the workpiece at an angle of 90º. For use with a variety of machines, mini-grinders to stationary cutting-off machines. Manufactured to EN 12413 standard. SAFETY TIPS Read the manufacturer's instructions carefullyWear goggles to guard against flying chips or dustInspect the condition of the wheel frequentlyAdjust the guard to deflect sparks and dustMaintain the revs and let the wheel do the work1 x Faithfull Cut Off Disc for Stone …

Makita Metal Cutting BandSaw Blade for LB1200F 2400mm 16mm 14tpi B-16695

from £83.95

Compare prices₅→

Makita Metal Cutting BandSaw Blade For LB1200F. Specifications • Blade Type: High Carbon Steel • Teeth per Inch: 14 • Speed: L • Size: 2240x16mm • Material: Nonferrous Metal / more→Cu / Ni / Ms / Zn • Model: LB1200F • Pack Quantity: 3

Makita Wood Cutting BandSaw Blade for LB1200F 2400mm 16mm 4tpi B-16667

from £62.00 up to £83.95

Compare prices₅→

Makita Wood Cutting BandSaw Blade For LB1200F. Specifications • Blade Type: High Carbon Steel • Material Guage: 165mm • TPI: 4 • Speed: H • Size: 2240x16mm • Material: Wo more→od / Cross Cut • Model: LB1200F • Pack Quantity: 3

Sealey Pack of 100 Ø100 x 1.2mm Ø16mm Bore

73.25Buy!
£

Electricalworld.com

Delivery: in United Kingdom

Report

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.• Pack of 100.Technical Specifica more→tionBore: ø16mmDisc Size: ø100 x 1.2mmNett Weight: 2kgPack Qty: 100Technical Specification:Bore: 16mm Disc Size: 100 x 1.2mm Pack Quantity: 100Dimensions: Length: 105mm x Height: 110mmWeight: 2.27KgWarranty: Consumable

Sealey Pack Of 50 Ø100 X 1.6Mm Ø16Mm Bore PTC/100CT

from £32.95 up to £40.99

Compare prices₆→

General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. Suitable for cutting stainless steel. Pack of 50. Features: • Genera more→l-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools • Suitable for cutting stainless steel • Pack of 50 Specifications: Guarantee:Consumable Model Number: PTC/100CT50

Sealey Pack Of 50 Ø100 X 3Mm Ø16Mm Bore PTC/100C50

from £37.95 up to £46.99

Compare prices₆→

General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. Pack of 50. Features: • General-purpose flat cutting disc recommende more→d for use with Sealey and other leading makes of grinding and cutting power tools • Pack of 50 Specifications: Guarantee:Consumable Model Number: PTC/100C50

Sealey Ø100 x 1.2mm Ø16mm Bore

from £0.95 up to £1.24

Compare prices₆→

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.General-purpose flat cutting disc more→recommended for use with Sealey and other leading makes of grinding and cutting power tools. Suitable for cutting stainless steel.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Suitable for cutting stainless steel. • Model No. PTC/100CETTechnical Specification:Bore: ø16mmDisc Size: ø100 x 1.2mmNett Weight: 0.02kgDimensions: Length: 100mm x Height: 15mmWeight: 0.216KgWarranty: Consumable

Sealey Ø100 x 1.2mm Ø16mm Bore Pack of 5

from £2.99 up to £4.43

Compare prices₆→

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.General-purpose flat cutting disc recommended for use with Sealey and ot more→her leading makes of grinding and cutting power tools. Suitable for cutting stainless steel.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Model No. PTC/100CET5Technical Specification:Bore: ø16mmDisc Size: ø100 x 1.2mmNett Weight: 0.11kgPack Qty: Pack of 5Dimensions: Length: 15mm x Height: 175mmWeight: 0.126KgWarranty: Consumable

Sealey Ø100 x 1.6mm Ø16mm Bore

from £1.05 up to £1.49

Compare prices₆→

• General-purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools.• Suitable for cutting stainless steel.General-purpose flat cutting disc more→recommended for use with Sealey and other leading makes of grinding and cutting power tools. Suitable for cutting stainless steel.• General purpose flat cutting disc recommended for use with Sealey and other leading makes of grinding and cutting power tools. • Suitable for cutting stainless steel. • Model No. PTC/100CTTechnical Specification:Bore: ø16mmDisc Size: ø100 x 1.6mmNett Weight: 0.03kgDimensions: Length: 18mm x Height: 100mmWeight: 0.03KgWarranty: Consumable