Car Pumps & Compressors Draper

Pistol-grip tyre inflator fitted with a clip-on connector that's compatible with most vehicles including; cars, commercial vehicles, motorbikes and trailers. The easy to read 65mm analogue gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 12 bar (170psi). Supplied with a 1/4" BSP male adaptor.

This 12V analogue tyre inflator is designed primarily for the rapid inflation of car, bicycle, motorcycle and small commercial vehicle tyres. It’s also supplied with a range of adaptors (three) to make it suitable for the inflation of balls, toys and other inflatable products. It features a built-in LED worklight and has a three metre power cord with 12V power plug and includes a spare fuse. Dial readings are in psi/bar, and the inflator has built-in compartments for the power cord, air hose and accessories.

Compatible with most vehicles and suitable for fault finding common issues with; air conditioning, fuel, transmission, brake systems, turbo waste gates, valve stem oil seals, ignition and emissions. Dual reading pressure gauge 0 - 760mmHg/0 - 30inHg. Display packed.

Multi-use transfer pump, fitted with a leak-free quick-link feature. Suitable for transferring liquids such as; water, oil, petrol, diesel and antifreeze. Can also be used as an air pump for inflating; bicycle tyres, air beds, inflatable toys and balls. Supplied with pump, retaining clip, lock-on connector, needle valve adaptor, inflating adaptor, 2 x 1300mm fluid transfer hoses and a 400mm air pump hose.

High output, geared rotary pump suitable for low viscosity and non-corrosive fluids such as diesel, oil and anti-freeze from 205L drums. 1L of liquid dispensed per handle revolution. Constructed from cast aluminium and plated steel. Packed in two cartons.

Expert Quality, self-priming, manual fluid transfer pump. Designed to work with engine oils, coolants, transmission fluid, brake fluid, power steering fluid, diesel, water, antifreeze etc. (NOT petrol). Its simple and easy to use operation delivers 100ml per stroke. Manufactured with a removable neoprene rubber end cap and high quality brass cylinder body and plunger. Supplied with 1,000mm x 6mm (1/4") I.D. translucent plastic suction hose and 600mm x 12mm (1/2") discharge hose.

Draper quality 12volt DC Direct driven air compressor fitted with a composite muffler. The automatic shut-off and thermal overload protector enables the compressor to stop once the max PSI is reached. Supplied and fitted with an anti-settling base panel, copper coil motor, crocodile clips, tyre inflator with gauge (accuracy +/ - 3.5psi) a female PCL style coupling which has a 1/4" BSP thread, a heavy-duty carry bag and 3 piece nozzle adaptors.

Draper Digital In-line tyre inflator fitted with a clip-on connector compatible for most vehicles including; cars, commercial vehicles, motorbikes and trailers and the easy to read 65mm digital gauge is attached with a heavy-duty rubber cover for increased protection. Maximum inflation pressure 20 BAR (300psi). Supplied with a 1/4" BSP male adaptor. The pressure dial on this model is for guidance only and should be checked with a tyre pressure gauge to BS EN12645. Specifications Colour: Black Guarantee: 1 year Pressure range: 0-20bar/0-300psi Supply inlet: 1/4" BSP taper (F) Hose length: 0.45M #html-body [data-pb-style="60FF6AB227696"]{justify-content: flex-start; display: flex; flex-direction: …

Allows fast and simple tyre inflation. Specification: Pressure range:10-160psi Max air supply pressure;17.2bar/250psi Supply inlet :1/4"" BSP taper (F)Hose length: 0.6M (approx.) Inflator with twin open-ended Push on connectors Allows fast and simple tyre inflation Colour: Silver

Hand-held dual reading gauge with flexible 250mm long hose. Swivel angled tyre connection and air release valve. Large easy-to-read scale graduated 5 - 100psi in 1psi increments and 0.3 - 7bar in 0.1bar increments. Display packed.