Car Pumps & Compressors Sealey

Features:Electric 12V pump kit with battery clips
High flow pump unit with bypass valve, suitable for filling diesel vehicles in the field
Cast iron pump body with anti-corrosion finish
Includes integrated onoff switch, delivery hose with manual delivery nozzle, suction hose and filter
Specifications:Model No: TP98Voltage: 12VSpeed: 2000rpmCurrent: 35APower: 240WDuty Cycle: 30min/hrFlow Rate: 85ltr/minHeight: 300Width: 414Length: 404

Features:Self-priming, piston pump fitted with anti-drip nozzle and 2IN BSP adaptor and dip-tube
Suitable for oils, antifreeze, degreasants and other non-corrosive fluids
Unit will deliver 200ml per stroke but by using the two sleeves supplied, delivery can be limited to 40, 80 or 140ml per stroke
Will fit most containers and drums from 25-205ltr
Height: 431Width: 77Length: 82

Features:Steel barrelled, self-priming, lever pump
Supplied with 2IN BSP adaptor and dip-tube suitable for 50 to 205ltr drums
Suitable for oils, antifreeze, degreasants and other non-corrosive fluids
High flow unit delivers approximately 500ml per stroke
Supplied with two delivery nozzles, one standard swan neck and one acute angle with filter for removing impurities from fluids from fluids

Features:Self-priming lever pump fitted with anti-drip nozzle, 2IN BSP connector and dip-tube to suit 100 or 205ltr drums
Added filter in pump to prevent any unwanted large particles getting into fluid system
Specially constructed with Viton seals for transferring AdBlue
1IN x 2000mm Hose for hands-free applications
Approximately 330ml per stroke discharge

Features:Composite body and dial type gauge with rubber protector
Calibrated in bar/psi
Fitted with 500mm rubber hose and a twin push-on connector
Specifications:Model No: SA9312Range: 0-10bar(0-145psi)Maximum Air Supply: 12bar(175psi)Inlet Size: 14"BSPMinimum Air Supply: naHeight: 247Width: 142Length: 93

Heavy-duty extruded aluminium body and zinc head. Linear pressure scale, read in psi and bar. Fitted with 0.5m rubber hose with steel protection sleeve and twin push-on air connector. Features: • Heavy-duty extruded aluminium body and zinc head • Linear pressure scale, read in psi and bar • Range: 0-9.6bar(0-140psi) • 0.5m Rubber hose with steel protection sleeve • Fitted with twin push-on air connector • Hose Length: 350mm Specifications: Guarantee:1 Year Model Number: SA39

Features:Heavy-duty extruded aluminium body and zinc head
Linear pressure scale, dual calibrated in psi and bar
2
75mtr Hose for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres
Specifications:Model No: SA396Range: 0-9

Robust, high reliability and modern design which is lightweight and space-saving. Touchscreen technology with human touch recognition software. Electronic pressure set with additional 4-button memory function. Three modes, inflate, deflate and over pressure setting (OPS) – which allows operator to set the machine to automatically seat the bead on new tyres whilst getting on with alternative work. The inclusion of the nitrogen (N2) purge facility allows the unit to increase the effectiveness of this increasingly popular tyre service. Red flashing light, flashing screen and audio signal for end of cycle. Auto-start Inflation. Ceramic sensor gives guaranteed accuracy to ± 0.5% of full scale rea…

Compatible with many brands of tyre inflator fitted with a 1/4”BSP male connector on the end of the hose.
Suitable for Sealey Model No's SA39, SA371, SA372, SA374, SA375, SA397, SA399, SA37/93 and SA37/95.

Manufactured to comply with EN 12645.
Linear pressure scale, dual calibrated in psi and bar, with parallax correction.
Fitted with 2.5M hose with clip-on Connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres.
Range: 0-9.6Bar(0-140psi).
Supplied with a serial numbered calibration certificate.
2 year Warranty.

Manufactured to comply with EN 12645. Aluminium body with rubber bumper. Linear pressure scale, dual calibrated in psi and bar, with parallax correction. Fitted with 2.5m hose with clip-on air connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres. Supplied with a serial numbered calibration certificate. Features & Benefits: • Manufactured to comply with EN 12645. • Aluminium body with rubber bumper. • Linear pressure scale, dual calibrated in psi and bar, with parallax correction. • Fitted with 2.5m hose with clip-on connector for compliance with safety regulations relating to inflation of commercial and agricultural vehicle tyres. •…

Die cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.
Auto power off after eight seconds and auto power on once pressure is sensed, or air inflation starts.
2.7M flexible hose fitted with clip-on air connector.

Die-cast aluminium body with large rubber bumper, backlit LCD digital display and battery level indicator.
Auto power off after eight seconds and auto power on once pressure is sensed, or air inflation starts.
0.5M flexible hose fitted with 240mm Push-On air connector.

Quick release coupling design with 360° swivel motion, for tyre inflators, wall gauges and portable gauges.
Simple but effective thumb push-button quick release.
Suitable to replace the connector on any tyre inflator with a 6mm(1/4") bore hose.