Air Compressors

The TE-AC 36/150 Li OF is a portable but powerful air compressor which runs on two standard 18v Power X-Change batteries simultaneously. The batteries are loaded into a compartment with a closing lid which keeps them protected from water splashes and dust. and a carry handle on top of the unit makes it easy to transport the compressor to and from locations. Features & Benefits • Cordless air compressor with 6 litre tank • Twin Pack 36v technology: runs on two 18v Power X-Change batteries • Battery compartment keeps the batteries protected from dust and liquid ingress • Pressure gauge and quick coupling for regulated working pressure • Protective roll cage which doubles …

Changing tires, clearing debris, or working with compressed air tools? The reliable oil-free compressor from MSW is a quiet, versatile, and mobile solution for all these tasks and more - and it can be used for up to 24 hours at a time. Accurately monitor and adjust all relevant settings with an in-built LCD display. Equipped with a 50 l steel tank, the air compressor rapidly attains the selected pressure. The device maintains a stable pressure of 3 to 12 bar; should the compressor exceed the maximum, it switches off automatically. If it falls below the minimum value, it starts up again to ensure stable pressure conditions. With a power output of 3000 W and a delivery rate of 500 l/min, the air …

• Pack of compressed air tools and accessories suitable for all leading makes of compressor.• Includes high performance suction feed spray gun with composite bayonet type pot lid, tyre inflator with gauge, paraffin/detergent spray gun, air blow gun and coiled air hose.• Components are fitted with 1/4"BSP threaded unions.Air tools and accessories suitable for all leading makes of compressor. Includes high performance suction feed spray gun with composite bayonet type pot lid, tyre inflator with gauge, paraffin/detergent spray gun, air blow gun and coiled air hose. Components are fitted with 1/4"BSP threaded unions. Also available individually, see below.• Contains quality components. • Kit Co…

Expert Quality, suitable for both Macpherson Strut Coil Springs and conical springs. Interchangeable jaws allow the kit to be used on Audi, BMW, Ford, HONDA, MITSUBISHI, Nissan, Porsche, SAAB, SUBARU, TOYOTA, Vauxhall, Volvo and VW. Safety overload system ensures protection for user while yoke protectors stop the springs from being damaged. Packed in blow mould plastic carrying case with display sleeve. Display packed.

The BRILLIANT TOOLS BT160200 3/4 Pneumatic Impact Wrench in blue is a powerful and efficient tool for any hardware or automotive project. With its lightweight design and ergonomic grip, this impact wrench is easy to use and can reach tight spaces with ease. Its impressive 3/4 inch drive allows for high torque output up to 1,200 foot-pounds, making it suitable for tasks such as heavy-duty equipment maintenance, engine work, and construction projects. This impact wrench is powered by compressed air, making it a perfect addition to your compressor setup. Its efficient motor and durable construction ensure that it will be a reliable tool in your kit for years to come. The blue color scheme adds …

The SIP B3800/270 Tandem Compressor offers powerful performance through tandem twin B3800 pumps and robust 3hp motors, which means continued operation should a motor or pump suffer failure. All of this is controlled by a central control box and staggered starting which reduces current draw. The B3800/270 Tandem is a true workhorse and is an essential piece of equipment to include in trade environments where prolonged demands need to be satisfied. Oil-lubricated and belt-driven workhorse compressor Twin B3800 pumps and powerful dual 3hp (2.2kW) motors Central control box and staggered starting reduces current draw Continued operation should one pump or motor suffer failure Heavy-duty cast iron …

Fully adjustable valve spring compressor for use on multi-valve petrol and diesel engines with deep seated valves. Universal model with unique dual-cam action, parallel lift and automatic locking reversible jaw/ adaptor, suitable for general use on a wide range of OHC, OHV and CVH engines. A unique ?direct action? compressor lever gives improved visibility and ease of use in areas of difficult access. Manufactured from heavy-duty steel with all riveted joints and slip resistant rubber handles. Features: Plastic coated handles Suitable for most engines Double-ended valve cut Above or below operation Specifications: Dimensions: H:6.0 x W:20.0 x D:55.0 cm Colour: Silver Material: Metal Model Number: …

The compact SIP AirHub Wall-Mounted Direct Drive Compressor with built-in retractable hose brings compressed air capability into your home or workshop in a convenient way, without compromising space or practicality. The 5pc air kit allows a variety of uses including inflation of tyres including race and mountain bikes, motorbikes, and cars; and blowing down chippings, swarf, and other workshop residue. With other air tools, sold separately, nailing/stapling, engine cleaning, and airbrushing are also possible. Low-noise wall-mounted air compressor with 9mtr retracting hose Compact Design: provides 8bar pressure in a handy space-saving format Quick & Easy Use: 180 hose rotation for versatility …

Air hose reel with polyethylene hose fitted with 1/4" BSP brass connectors. 20m of durable hose. Maximum working pressure of 20bar. Sturdy hose reel made from steel with floor standing frame and carry handle.

• Compressed air receiver manufactured to meet Pressure Vessel Directive and supplied with test certificate.• Includes fitting kit, safety valve, gauge and drain valve (hose not included).• Can also be used in conjunction with other Sealey compressors.• Overall Size (H x ø): 1554 x ø446mm.Compressed air receiver manufactured to meet Pressure Vessel Directive and supplied with test certificate. Includes fitting kit, safety valve, gauge and drain valve (hose not included). Can also be used in conjunction with other Sealey compressors.• Compressed air receiver manufactured to meet Pressure Vessel Directive and supplied with test certificate. • Includes fitting kit, safety valve, gauge…

• PERFORMANCE - Maximum Free Air Delivery: 26.2cfm(742L/min).• POWER - Minimum rated motor power is 7.5hp.• FINNED FLYWHEEL - Designed to aid pump cooling.• RELIABILITY - Heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life.Technical SpecificationAir Displacement cfm(L/min): 29.7(840)Nett Weight: 48.73

• PERFORMANCE - Maximum Free Air Delivery: 15.9cfm(450L/min).• POWER - Minimum rated motor power is 5.5hp• FINNED FLYWHEEL - Designed to aid pump cooling.• RELIABILITY - Heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life.Technical SpecificationAir Displacement cfm(L/min): 20.7(585)Nett Weight: 27.48kg

• PERFORMANCE - Maximum Free Air Delivery: 10.9cfm(310L/min).• POWER - Minimum rated motor power is 3hp.• FINNED FLYWHEEL - Designed to aid pump cooling.• RELIABILITY - Heavy-duty full cast cylinders, capped by alloy heads for improved heat dissipation and long-life.Technical SpecificationAir Displacement cfm(L/min): 13.4(380)Nett Weight: 20.84kg

• SUITABILITY - Replacement motor for air compressors and electric driven machines.• POWER - 3hp 2.2kw motor power.• FAN VENTILATED - Designed to aid motor cooling.• MOTOR - Twin capacitors and a centrifugal switch aid trouble-free start-up.Technical SpecificationMotor Power: 3hpNett Weight: 15.66kgSupply: 230VTechnical Specification:Supply: 230VDimensions: Length: 235mm x Height: 240mmWeight: 15.662KgWarranty: 6 months

FEATURES:- mobile piston compressor in oil-free design- 1-cylinder unit with Teflon piston, which does not require maintenance- incl. pressure reducer for precise delivery pressure adjustment- best suited for indoor use because of its very low noise- with rubber feet for vibration-free standing- Boiler size: 6 l- Boiler pressure: 8 bar- Suction capacity: 110 l/min- Delivery rate: 90 l/min- Rotational Speed: 1440 rpm- Sound pressure level dB/LWA: 68/85- Motor PS/KW: 1/0,7- Dimensions: 530 x 210 x 540 mm- Weight: 15 kg

Features:Compact impact wrench with a head length of 97 mm.Optimally balanced centre of gravity, for fatigue-free working.850 Nm Breakaway torque.Air consumption:120 l/min.Pressure:max.6.3 bar.Torque stage 1:250 Nm, stage 2:450 Nm, stage 3:650 Nm.Dimensions:97 x 190 x 65 mm.Weight:1.6 kg.

The AEROTEC Airliner 6 Air Compressor Black is a reliable and powerful hardware tool that can handle all your compressed air needs. Whether you're a DIY enthusiast or a professional, this compressor can handle a wide range of tasks, including inflating tires, powering air tools, and painting. With a sleek black design, the AEROTEC Airliner 6 Air Compressor is both stylish and functional. It features a 6-liter capacity tank and an oil-free motor that delivers up to 8 bars of pressure, making it one of the most efficient compressors in its class. With a noise level of only 60 dB(A), it is also one of the quietest. Don't settle for a subpar compressor. Upgrade to the AEROTEC Airliner 6 Air Compressor …

The AEROTEC 590-90 S-TECH CM3 90L 4HP Air Compressor is a high-quality tool designed for professional use in a variety of settings. The sleek black design is not only aesthetically pleasing but also durable, ensuring years of reliable performance.This air compressor boasts a powerful 4HP motor that delivers outstanding air pressure and flow rates. Its 90L tank capacity allows for extended operation time without the need for frequent refills.Equipped with advanced S-TECH technology, the AEROTEC 590-90 compressor provides efficient and reliable performance, while the CM3 system ensures smooth and quiet operation.This air compressor is ideal for heavy-duty applications, from powering air tools …

FEATURES:- Piston compressor with single-cylinder unit and ball valve- With pressure reducer for precise delivery pressure adjustment- Pressure switch for start-up relief- Easy transport- Feet for stability- Extra large pressure regulator and easy to read pressure gauge- Boiler size: 50 l- Boiler pressure: 10 bar- Suction capacity: 280 l/min- Delivery rate: 170 l/min- Rotational Speed: 2880 rpm- Engine output kW: 1.8- Engine output PS: 2.5- Voltage: 230 V- Dimensions: 850 x 325 x 700 mm- Weight: 38 kg

Draper quality 12volt DC Direct driven air compressor fitted with a composite muffler. The automatic shut-off and thermal overload protector enables the compressor to stop once the max PSI is reached. Supplied and fitted with an anti-settling base panel, copper coil motor, crocodile clips, tyre inflator with gauge (accuracy +/ - 3.5psi) a female PCL style coupling which has a 1/4" BSP thread, a heavy-duty carry bag and 3 piece nozzle adaptors.

Features: Belt - driven, Suitable for workshop use, Thermal motor protection overload, on/off pressure switch, pressure gauge and twin outlet, Wheels and transport handle, Quick euro coupling outlet

The SIP 3HP/150-SRB utilises a combination of heavy-duty components to provide high-quality dryer air via superior moisture reduction including finned manifolds, an oversized crankcase, and an aluminium aftercooler which also offers a reduced weight and higher corrosion resistance. An essential compressor for all trade and professional applications. Oil-lubricated and belt-driven compressor Extra-strong moulded plastic belt and flywheel guards for improved safety Multi-finned flywheel for improved cooling and long life Heavy-duty cast iron barrel for an increased service life Finned manifolds and aluminium aftercooler for reduced moisture; aluminium ensures a reduced weight and higher corrosion …

The SIP 3HP/150-SRB utilises a combination of heavy-duty components to provide high-quality dryer air via superior moisture reduction including finned manifolds, an oversized crankcase, and an aluminium aftercooler which also offers a reduced weight and higher corrosion resistance. An essential compressor for all trade and professional applications. Oil-lubricated and belt-driven compressor Extra-strong moulded plastic belt and flywheel guards for improved safety Multi-finned flywheel for improved cooling and long life Heavy-duty cast iron barrel for an increased service life Finned manifolds and aluminium aftercooler for reduced moisture; aluminium ensures a reduced weight and higher corrosion …

The SIP 110v OL197/10RC is designed to be as integrated as possible, and thus features a top-mounted foot plate to help users in a range of applications including tyre inflation, cleaning, nailing, and stapling, complete their tasks no matter where they are, and an all-in-one control panel with easy-to-read gauge and ergonomic pressure regulator. Ideal for low pressure and low volume applications. Oil-free system for a maintenance-free clean air supply Lightweight and compact design for easy portability and storage Integrated sturdy and safe foot plate for added versatility Control panel with easy-to-read gauge and ergonomic pressure regulator Efficient cooling system for durability and extended …