Other Sound & Hi-Fi

Patch Code Decoder for DR-G1 Series

Lens hood for the EF-M 11-22mm f/4-5.6 IS STM Lens.

The Lens Hood EW60E is designed specifically for the EF-M 11-22mm f/4-5.6 IS STM Lens. it is a two-pronged petal-shaped bayonet mount hood.

Canon Exchange Roller Kit

User-Replaceable Exchange Roller Kits Are A Recommended Purchase For Periodic Unit Maintenance. This Roller Is Compatible With The Dr-6010C/4010C.

Easy Service Plan Installation ServiceEasy Service Plan Installation Service - Imageformula Production Scanner. For The Dr-G1100/G1130/X10c

Exchange Roller Kit For Cr190i

12V, 1.5C AC power adapter that is perfect for performing keyboardists and is compatible with Casio CTK-6000, 7000, WK-7500, PX-135, 330, 735 and AP-220 keyboards.
Number of Outputs: 1
Polarity: Center Plus
Current (mA): 1500.0
UK/EU Power supply included: No
Current: 1001-1500 mA
Voltage: 12V
Plug Type: Barrel
ChargerType: Power Supply
Power Supply: 240V
Made in: China

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that complement well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Type: PA
Magnet Type: Neodymium
Made in: China
Power: 100 W
Frequency Range: 800 Hz - 20 kHz
Weight: 0,75 kg
Impedance: 8 Ohm
Diameter (inch): 1.0
Sensitivity: 107 dB
Power RMS: 50 W
Power (Watt): 100.0
Diameter: 1"
Power RMS (Watt): 50.0

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1731 compression driver has a 1.75 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1731 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1731 is the perfect choice.

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Power (Watt): 80.0
Diameter (inch): 1.0
Power RMS: 40 W
Diameter: 1"
Made in: China
Power: 80 W
Type: PA
Power RMS (Watt): 40.0
Frequency Range: 1200 Hz - 20 kHz
Weight: 3,0 kg
Magnet Type: Ferrite
Impedance: 16 Ohm
Sensitivity: 110 dB…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Diameter: 1"
Frequency Range: 1200 Hz - 20 kHz
Weight: 0,75 kg
Power RMS: 40 W
Type: PA
Magnet Type: Neodymium
Sensitivity: 110 dB
Power: 80 W
Diameter (inch): 1.0
Power (Watt): 80.0
Made in: China
Power RMS (Watt): 40.0
Impedance: 8 Ohm

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Made in: China
Type: Speaker unit
Power: 600 W
Magnet Type: Ferrite
Sensitivity: 99 dB
Weight: 5,5 kg
Power RMS: 300 W
Diameter (inch): 10.0
Impedance: 8 Ohm
Frequency Range: 60 Hz - 5 kHz
Power (Watt): 600.0
Power RMS (Watt): 300.0
Diameter: 10"

Optimized flux distribution in the magnet assembly provides exceptionally low harmonic distortion, for detailed sound reproduction. This 8” cast frame, ferrite magnet loudspeaker is ideal for use as a bass/mid driver in 2-way sound reinforcement cabinets, delivering 400 W continuous power handling (200 W RMS AES standard) and 93 dB sensitivity.
Magnet Type: Ferrite
Type: Speaker unit
Power RMS (Watt): 200.0
Diameter (inch): 8.0
Impedance: 8 Ohm
Power RMS: 200 W
Made in: China
Weight: 3,8 kg
Sensitivity: 93 dB
Power: 400 W
Power (Watt): 400.0
Frequency Range: 70 Hz - 6 kHz
Diameter: 8"

With 700 W continuous power handling (350W RMS AES standard), this robust, cast aluminium replacement driver has been designed for superior sound reinforcement. Purpose-built for mid/bass applications, it really comes into its own when used with compact 12” enclosures. The efficient, Finite Element Analysis-optimised magnet structure delivers high BL (magnetic flux) for a tight, controlled low end performance that delivers truly detailed, high-definition sound reproduction.
Power: 700 W
Frequency Range: 40 Hz - 4 kHz
Impedance: 8 Ohm
Magnet Type: Ferrite
Weight: 6,3 kg
Diameter (inch): 12.0
Diameter: 12"
Power RMS: 350 W
Power RMS (Watt): 350.0
Made in: China
Sensitivity: 96 dB
Power (…

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Type: PA
Power: 150 W
Power RMS: 75 W
Power (Watt): 150.0
Impedance: 8 Ohm
Power RMS (Watt): 75.0…

8'' coaxial loudspeaker providing 200Wrms (AES standard) power handling and 94dB sensitivity. Full range frequency response: 70 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminium chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Power (Watt): 200.0
Power RMS: 100 W
Power RMS (Watt): 100.0
Type: PA
Diameter: 8"
Made in: China
Impedance: 8 Ohm
…

Outstanding full-range sound reproduction. The Celestion FTX1225 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 360W RMS power handling. Offering clear and defined audio from 50Hz all the way up to 20kHz the FTX1225 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.75 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX1225 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots …

The FTX1530 is a 15″ diameter cast frame common motor coaxial speaker, with a single ferrite magnet that acts as a motor for both LF and HF drivers saving space and weight. With a 3″ voice coil, the speaker provides a 800 W continuous / 400 W (AES standard) power rating with a 97 dB LF sensitivity (106.5 dB HF sensitivity). It incorporates a 3″ voice coil compression driver to deliver a 40 Hz to 20 kHz frequency response. An external crossover is required, directing the low and high frequency parts of the input signal to the woofer and HF driver respectively.
Frequency Range: 40 Hz - 4 kHz
Diameter: 15"
Power RMS: 600 W
Type: Speaker unit
Power (Watt): 1200.0
Magnet Type: Ferrite<…

Versatile 12 twin-cone design. The Celestion K12H-200TC is a 12 boasts a nominal impedance of 8 Ohms and 200W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-200TC is perfect for a wide variety of system applications. The K12H-200TC boasts a 1.41kg ferrite magnet and a 2 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst …