Other Sound & Hi-Fi

Percussion Gig Bag

Percussion Gig Bag / Black

Percussion Gig Bag / Black

Percussion Gig Bag / Black

Slap Top Cajon Bag for All Meinl Slap Top Cajon Models.
Features
Fits any MEINL Slap Top cajon model
Padded shoulder strap
Strong carry grip
External pocket for accessories and parts
Heavy duty nylon.
Made in: China

Percussion Gig Bag

Percussion Gig Bag

Percussion Gig Bag

Percussion Gig Bag

Perfect for drum set players who thrive on organization, marching drummers storing extra-large sticks, or percussionists who carry a plethora of mallets. The Meinl Stick Sling Bag is a wider version of Meinl’s best-selling Professional Stick Bag. Inside are eleven pockets of varying size for any kind of stick, mallet, rod, brush or accessory. An oversized exterior pouch is big enough to fit bulkier items like books, sheet music, practice pads, metronomes and other accessories. Carry the loaded bag with its sturdy, reinforced handles or use the adjustable body strap to sling the bag across your body and keep your hands free. Utilize the attached heavy-duty clips to suspend the open bag …

Padded protection bag for TanTam, made from hard-wearing nylon fabric. Features outer pocket, handle and padded shoulder strap. Fits for sizes 14", height 28". In a black finish.
Made in: China

Percussion Gig Bag / Black

Instrument Equipment Bag / Grey

Percussion Gig Bag / Black

Percussion Gig Bag / Black

This High-power Mono level control has a push-on knob with 10mm thread. The Peak current is at 100WMAX, and the Attenuation direction counterclockwise. Technical Specification Impedance 8ohm ±20% Attenuation direction counterclockwise Turning angle 300° ±5° Attenuation 0dB up to ∞dB Channels mono Peak current 100WMAX

KU-516 Weatherproof Professional Horn Driver 50WRMS 16ohm The KU-516 Weatherproof Professional Horn Driver 50WRMS 16ohm is made of a die cast and matches the SK-22 and SK-159 horns. The horn driver features a 3.5cm mounting flange and has an IP rating of IP66. Features: Diecast version, IP66 Protected against powerful water jets Matching the horns SK-22 and SK-159 3.5cm (1 3/8 ') mounting flange Technical specification: Power rating - 50WRMS/75WMAX (16ohm) Frequency range - 160-6,500Hz SPL (1W/1m) - 113dB Dimensions - Ø 125mm x 100mm Weight - 2.35kg Special feature - IP66 Replacement voice coil - KU-516/VC IP Rating - IP66 - Dust tight (no ingress of dust; complete protection against …

Horn tweeter, 8ohm Plastic version, good efficiency and a wide bandwidth, suitable for universal PA applications. Replacement voice coils are available at option (MHD-1255/VC). Technical Specification Impedance (Z) 8ohm Resonant frequency (fs) 2,000Hz Max. frequency range fx-15kHz Rec. crossov. frequ. (fmax.) (12dB/oct.) 3,000Hz Music power 55WMAX Power rating (P) 30WRMS SPL (1W/1m) 103dB Radiation angle (vert./hor.) 45°/90° Voice coil diameter 25mm Magnet diameter 80mm Mounting cutout 240x80mm Mounting depth 187mm Dimensions 269x101mm Weight 1.05kg

High-End Speaker Technology matching the SPH-... series, coated special cone with highly dampening dust cap and extra flat basket (does not have to be recessed!), top linearity, perfect mass-drive ratio with a wide bandwidth, HiFi for highest requirements. Technical Specifications: Impedance (Z) 8ohm Resonant frequency (fs) 85Hz Max. frequency range fx-10,000Hz Rec. crossover freq. (fmax.) 300/5,000Hz Music power 120WMAX (400-5,000Hz) Power rating (P) 50WRMS SPL (1W/1m) 89dB Suspension compl. (Cms) 0.8mm/N Moving mass (Mms) 4.5g Mech. Q factor (Qms) 1.98 Electr. Q factor (Qes) 0.55 Total Q factor (Qts) 0.43 Equivalent volume (Vas) 4 l DC resistance (Re) 6.3ohm Voice coil induct. (Le) 0.3mH …

Variable adapter piece for stand inserts with standard diameter. Black lacquered steel tube version Height can be adjusted in 5 steps (86-134cm), with locking pin Load capacity: 30kg Weight: 1.9kg

PAST-88/SW Wall Support For PA Speaker System Wall Support For PA Speaker Systems A black lacquered finish adds a premium look to the support. The support is movable (approx. 150°) and tiltable (approx. 20°) and can be locked with setscrews. Fixing bolt for accepting e.g. PA speaker systems with stand insert as well as carrier plates and adapter plates. Distance between fixing bolt and mounting plate: 285mm Total length: 310mm Load capacity: 20kg Safety Note To be installed by experts only! Pay attention to precise screw connection! Please use suitable safety ropes!

Professional Speakers from IMG Stage Line Of very high power capability, high efficiency and with drive parameters which allow a reproduction of the complete bass range: these speakers guarantee excellent results as bass-midrange speakers in 2-way or multiway systems as well as subwoofers with the two larger models. Professional PA bass-midrange speaker, 600WMAX, 300WRMS, 8ohm 25cm (10") professional speaker of very high power capability and quite long excursion, diecast basket, water-repellent coated cone, very good workmanship with a facing basket front, wide frequency response of low distortion and high efficiency, the drive system features a drilled pole core and an additional magnet …

Universal speaker, 60WMAX, 4ohm For general and replacement purposes, of quite high power capability, to be used in the bass-midrange, 30WRMS. Technical Specification Impedance 4ohm Music power 60WMAX Power rating 30WRMS Mounting cutout Ø 147mm Mounting depth 79mm Magnet diameter 100mm Dimensions Ø 169mm Weight 1.07kg

A very talented 2-way speaker, thanks to a very clean reproduction of the midrange. Despite a very attractive price, the SP-202E from MONACOR is ideally suited for 2-way applications and promises an excellent sound quality.
Hi-fi bass-midrange speaker, 50 W, 4 Ω
All-round speaker
Foam surround
Replacement speaker for closed speaker systems
Frequency Range: f3 - 6 kHz
Type: PA
Woofer: 8"
Sound Pressure Level - SPL (dB): 93.0
Diameter: 8"
Weight: 1,4 kg
Power: 100 W
Power (Watt): 100.0
Power RMS: 50 W
Made in: China
Power RMS (Watt): 50.0
Impedance: 4 Ohm