Other Sound & Hi-Fi

The NEWlink power extension blocks are perfect for home and office use and have a 2 3 5 or 10 metre cable to provide power to work stations and any home or office equipment that uses a standard UK plug.

The surge protected models provide better protection to electrical equipment by protecting against voltage spikes. The sockets are individually switched allowing greater control.

- Individually switched
- Surge protection status LED
- HO5VV-F 3G 1.25mm2 cable
- 13Amp
- White

The NEWlink power extension blocks are perfect for home or office use they have various lengths sockets and are either surge protected or non surge protected.

- Surge protection status LED
- White

- 50 Microns Pack of 100
- Gold pins
- 2 Prongs on pins
- Unshielded

The CAT6A punch down module is 50 x 25mm punch down module to fit in faceplates.

Instant Staple Remover-A1Increase High-Volume Scan Productivity With One-Touch Staple Removal For Streamlined Workflows (Manufactured By Max Co. Ltd).Save Time By Accelerating Your Scan WorkflowsEfficiently Remove Staples To Ensure Your Documents Are Ready For Scanning And Copying. Simple One-Touch Operation Streamlines Preparation Of Documents And Together With Canon Imageformula Production Scanners Accelerates Digital Workflow Processes.Quick And Easy Staple RemovalSpeed Up Pre-Scan Preparation Of Documents With One-Touch Staple Operation. Simply Align The Staple With The Led Light And Press The Switch &Ndash; Also Compatible With Footswitches.Minimal Document DamageNeat Staple Removal Reduces …

Canon 5595C001 printer/scanner spare part Roller 2 pc(s)

Canon Carrying Case for the imageFORMULA P-150 High Speed Scanner.

Compatibility:

-- imageFORMULA P-150
-- imageFORMULA P-150M

Patch Code Decoder for DR-G1 Series

Canon Exchange Roller Kit

Lens hood for the EF-M 11-22mm f/4-5.6 IS STM Lens.

The Lens Hood EW60E is designed specifically for the EF-M 11-22mm f/4-5.6 IS STM Lens. it is a two-pronged petal-shaped bayonet mount hood.

User-Replaceable Exchange Roller Kits Are A Recommended Purchase For Periodic Unit Maintenance. This Roller Is Compatible With The Dr-6010C/4010C.

Easy Service Plan Installation ServiceEasy Service Plan Installation Service - Imageformula Production Scanner. For The Dr-G1100/G1130/X10c

Exchange Roller Kit For Cr190i

12V, 1.5C AC power adapter that is perfect for performing keyboardists and is compatible with Casio CTK-6000, 7000, WK-7500, PX-135, 330, 735 and AP-220 keyboards.
Current (mA): 1500.0
Made in: China
Power Supply: 240V
UK/EU Power supply included: No
ChargerType: Power Supply
Plug Type: Barrel
Number of Outputs: 1
Polarity: Center Plus
Voltage: 12V
Current: 1001-1500 mA

Hear every high frequency within your sound. The Celestion CDX1-1010 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Designed to deliver pristine highs that complement well-defined low frequencies. Guaranteed to project your sound without sacrificing the quality. The CDX1-1010 has a nominal impedance of 8 ohms and is capable of handling 15 watts of continuous power. Installation is quick and simple - the driver just screws into the speaker enclosure. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1010 is the perfect choice.

Hear every high frequency within your sound. The Celestion CDX1-1070 compression driver has a 1 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver pristine highs that complement well-defined low frequencies. The CDX1-1070 has a nominal impedance of 8 ohms and is capable of handling 12 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1070 is the perfect choice.

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Frequency Range: 800 Hz - 20 kHz
Power RMS: 50 W
Made in: China
Diameter: 1"
Impedance: 8 Ohm
Power (Watt): 100.0
Power RMS (Watt): 50.0
Magnet Type: Neodymium
Type: PA
Weight: 0,75 kg
Power: 100 W
Diameter (inch): 1.0
Sensitivity: 107 dB

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1731 compression driver has a 1.75 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1731 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1731 is the perfect choice.

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Power (Watt): 80.0
Frequency Range: 1200 Hz - 20 kHz
Sensitivity: 110 dB
Diameter (inch): 1.0
Power: 80 W
Power RMS (Watt): 40.0
Diameter: 1"
Magnet Type: Ferrite
Weight: 3,0 kg
Power RMS: 40 W
Impedance: 16 Ohm
Type: PA
Made in: China…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Power RMS (Watt): 40.0
Made in: China
Diameter: 1"
Power RMS: 40 W
Power (Watt): 80.0
Diameter (inch): 1.0
Weight: 0,75 kg
Type: PA
Frequency Range: 1200 Hz - 20 kHz
Impedance: 8 Ohm
Power: 80 W
Sensitivity: 110 dB
Magnet Type: Neodymium

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3040 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3040 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3040 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Impedance: 8 Ohm
Weight: 5,5 kg
Power (Watt): 600.0
Power: 600 W
Frequency Range: 60 Hz - 5 kHz
Power RMS (Watt): 300.0
Power RMS: 300 W
Type: Speaker unit
Sensitivity: 99 dB
Magnet Type: Ferrite
Made in: China
Diameter (inch): 10.0
Diameter: 10"