Other Sound & Hi-Fi Celestion

15 Watt. 8 Ohms, Guitarspeaker. Frequency range 75 - 5000 Hz, Weight 4,2 Kg, Made in England
Sensitivity: 100 dB
Diameter: 12"
Weight: 4,2 kg
Power: 15 W
Frequency Range: 75 Hz - 5 kHz
Тype: Guitar Loudspeaker
Impedance: 8 Ohm
Made in: United Kingdom
Magnet Type: Alnico
Power (Watt): 15.0
Sensitivity (dB): 100.0
Diameter (inch): 12.0

Need a speaker for adding depth to a hollow-sounding amp? The Celestion G10 Vintage is a 10 speaker that can be used singly for those who want to achieve that humbucking tonality from single coils. It is also ideal for adding warmth to more compact valve combos.This sonically-powerful G10 Vintage Speaker offers a fast response with the smooth creamy and strong vocal tones of a 12 speaker. Even use in quartets for a lively yet meaty attack.

Very lightweight, low-profile ferrite magnet compression driver with power rating of 15 W RMS (30 W continuous) and nominal impedance of 8 Ohm. It utilizes the Finite Element Analysis (FEA) techniques used to optimise both magnetic and acoustic design and is ideal for entry-level two-way and three-way sound reinforcement cabinets. The driver is equipped with a 1” voice coil made of copper clad aluminium with PETP film diaphragm and surround material. It is supplied with partial phase plug assembly (for applications where outer phase plug and horn form single moulding as part of front baffle). Frequency range: 1.5 kHz-20 kHz. Sensitivity: 107 dB. Mounting information: width – 90 mm, depth – 52…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1430 compression driver has a 1.4 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1430 has a nominal impedance of 8 ohms and is capable of handling 50 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1430 is the perfect choice.

1" exit neodymium magnet compression driver.Maximum modal suppression phase plugDeep-drawn titanium diaphragm with polyamide surround1,500Hz recommended min. crossover freq (12dB/oct)
Diameter (inch): 1.0
Frequency Range: 800 Hz - 20 kHz
Weight: 0,75 kg
Power RMS (Watt): 50.0
Power (Watt): 100.0
Made in: China
Diameter: 1"
Power: 100 W
Тype: PA
Magnet Type: Neodymium
Impedance: 8 Ohm
Sensitivity: 107 dB
Power RMS: 50 W

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1731 compression driver has a 1.75 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX1-1731 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1731 is the perfect choice.

Superb design and high build quality makes this well-established ferrite magnet compression driver ultra-reliable. Ideal as a drop-in replacement HF driver used with two-way and three-way cabs, CDX1-1745 provides 80 W continuous power handling (40W RMS AES standard) and 110 dB sensitivity. Features Celestion’s proprietary Sound Castle clamping system for greatly reduced distortion and increased lifespan.
Power: 80 W
Impedance: 16 Ohm
Sensitivity: 110 dB
Made in: China
Тype: PA
Power RMS: 40 W
Diameter: 1"
Diameter (inch): 1.0
Power RMS (Watt): 40.0
Magnet Type: Ferrite
Power (Watt): 80.0
Weight: 3,0 kg
Frequency Range: 1200 Hz - 20 kHz…

Hear every detail within the high frequencies of your sound. The Celestion CDX1-1745 compression driver has a 1.75 copper-clad aluminium voice coil with a ferrite magnet. Guaranteed to project your sound without sacrificing the quality. Designed to deliver an extended frequency response with pristine highs that complement well-defined low frequencies. The CDX1-1745 has a nominal impedance of 8 ohms and is capable of handling 40 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX1-1745 is the perfect choice.

1" exit neodymium magnet compression driver.2,200 Hz recommended min. crossover freq (12 dB/oct)Single piece PETP film diaphragm and surroundSound Castle diaphragm assemblyScrew fitting
Diameter (inch): 1.0
Weight: 0,75 kg
Power RMS (Watt): 40.0
Power (Watt): 80.0
Frequency Range: 1200 Hz - 20 kHz
Power RMS: 40 W
Power: 80 W
Impedance: 8 Ohm
Magnet Type: Neodymium
Made in: China
Тype: PA
Sensitivity: 110 dB
Diameter: 1"

Hear every detail within the high frequencies of your sound. The Celestion CDX14-3050 compression driver has a 3 copper-clad aluminium voice coil with a neodymium magnet. Delivering an extended frequency response with detail and definition. Guaranteed to project your sound. Every delicate nuance is faithfully reproduced - from the crystal-clear highs to the well-defined midrange. The CDX14-3050 has a nominal impedance of 8 ohms and is capable of handling 75 watts of continuous power. If youre looking to replace a blown tweeter or improve the sonic ability of your loudspeaker the Celestion CDX14-3050 is the perfect choice.

10", cast aluminium chassis, ferrite magnet mid/bass driver. Balanced airflow venting provides enhanced cooling. Twin demodulation rings.
Power (Watt): 600.0
Тype: Speaker unit
Power RMS (Watt): 300.0
Diameter (inch): 10.0
Magnet Type: Ferrite
Frequency Range: 60 Hz - 5 kHz
Diameter: 10"
Power: 600 W
Sensitivity: 99 dB
Made in: China
Impedance: 8 Ohm
Power RMS: 300 W
Weight: 5,5 kg

Balanced and well-defined mids. The Celestion FTR08-2011D is an 8 mid-range driver with a 2 round copper voice coil and ferrite magnet. With a nominal impedance of 8 ohms and a 300 watt continuous power rating the FTR08-2011D faithfully reproduces every detail within the mid frequencies. The perfect choice for a three-way multi-driver speaker. The FTR08-2011D is constructed with a lightweight cast aluminium chassis. Providing structural integrity and ensuring minimal interference with the voice coils ferrite magnet. With a kevlar loaded paper cone the 8 driver is able to deliver superior acoustic performance. Easy to install using the four mounting slots this compact driver is designed to fit …

Powerful and punchy bass. The Celestion FTR12-3070C is an 12 low frequency driver with a 2 round copper voice coil and ferrite magnet. With a nominal impedance of 8 ohms and a 350 watt continuous power rating the FTR12-3070C is the ideal choice for any speaker system design. The FTR12-3070C is constructed with a lightweight cast aluminium chassis. Providing integrity and ensuring minimal interference with the voice coils ferrite magnet. With a frequency range of 40Hz to 4kHz the driver is able to produce incredible detail and fast transient responses. Easy to install using the eight mounting slots this compact driver is designed to fit cut-outs measuring 11.26. Take advantage of Celestions …

6.5'' coaxial loudspeaker providing 150Wrms (AES standard) power handling and 92dB sensitivity. Full range frequency response: 110 – 20,000Hz. FEA (Finite Element Analysis) optimized ferrite magnet assembly acts as common motor for both LF and HF drivers resulting in enhanced coherence. Robust cast aluminum chassis is designed to minimize unwanted reflections, further reducing acoustic distortion. Demodulation ring reduces flux modulation, minimizing electromagnetic distortion. 2'' edgewound copper clad aluminum voice coil wound on high temperature glass fibre former. 100° nominal HF coverage.
Power RMS (Watt): 75.0
Power (Watt): 150.0
Made in: China
Impedance: 8 Ohm
Power RMS: 75 W
Power: 150…

Outstanding full-range sound reproduction. The Celestion FTX0820 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 240W RMS power handling. Offering clear and defined audio from 70Hz all the way up to 20kHz the FTX0820 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.4 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX0820 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots in …

Outstanding full-range sound reproduction. The Celestion FTX1225 is a coaxial driver with a nominal impedance of 8 Ohms and a total of 360W RMS power handling. Offering clear and defined audio from 50Hz all the way up to 20kHz the FTX1225 is perfect for a wide variety of system applications. This high-performance driver features a coaxially-mounted 1.75 polyimide compression driver that utilises an FEA-optimised ferrite magnet assembly. This assembly acts as a common motor for the LF and the HF drivers for significantly improved coherence. The FTX1225 also features a demodulation ring that reduces flux modulation resulting in minimised electromagnetic distortion. With eight mounting slots …

Versatile 12 twin-cone design. The Celestion K12H-100TC boasts a nominal impedance of 8 Ohms and 100W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-100TC is perfect for a wide variety of system applications. The K12H-100TC boasts a 1.41kg ferrite magnet and a 1.75 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst a double-roll …

Versatile 12 twin-cone design. The Celestion K12H-200TC is a 12 boasts a nominal impedance of 8 Ohms and 200W RMS power handling. With an extended frequency response ranging from 50Hz all the way up to 10kHz the K12H-200TC is perfect for a wide variety of system applications. The K12H-200TC boasts a 1.41kg ferrite magnet and a 2 high-temperature copper voice coil for exceptional reliability and performance. Reliability is further increased with an optimised cone neck/voice coil assembly as well as minimising high-frequency distortion and providing improved overall sound quality. The secondary cone is terminated by a pressure-formed cloth dust cap to enhance the clarity of the mid-band whilst …

Mids as they were meant to be heard. The Celestion TF0510MR is a 5 mid-range driver with a nominal impedance of 8 Ohms and a 30W RMS power rating. With the ability to reproduce mid frequencies with outstanding clarity and detail the TF0510MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0510MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

6” mid-range driver with nominal impedance of 8 Ohm that provides 95 dB sensitivity and 100W RMS power rating (200 W continuous), ideal for two-way systems. It achieves optimal performance in compact enclosures. It features a 1.5” high temperature copper voice coil wound on polyimide former for increased reliability, vented ferrite magnet assembly for enhanced cooling and rigid pressed steel chassis design for maximum energy transfer. It is also equipped with a single suspension, polyimide former and Kevlar loaded paper cone with cloth sealed surroundings. Frequency range: 85 Hz-6 kHz. Overall diameter: 178 mm. Overall depth: 74 mm. Cut-out diameter: 147 mm. Weight: 1.4 kg.
Impedance: 8 Ohm<…

Mids as they were meant to be heard. The Celestion TF0615MR is a 6 mid-range driver with a nominal impedance of 8 Ohms and a 50W RMS power rating. With the ability to reproduce mid frequencies with outstanding clarity and detail the TF0615MR is the perfect choice for a three-way multi-driver speaker system. The closed-back design prevents your low-frequency drivers backwave radiation from affecting the TF0615MRs motion eliminating the need for a separate mid-range enclosure in your cabinet. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. Easy to install using the four mounting …

Loudspeaker-type low-frequency 8” driver that provides 94dB sensitivity and 100Wrms (AES standard) power handling. It features a pressed steel chassis, a ferrite magnet, a Kevlar loaded paper cone and a 1.75” high temperature copper voice coil wound on polyimide former for increased reliability. It achieves optimal performance in compact enclosures and delivers an exceptional performance through bass and mid-range – it is ideal for two-way systems. Nominal impedance: 8 Ohm. Frequency range: 70 Hz-6 kHz. Unit weight: 2.3 kg.
Power RMS (Watt): 100.0
Power (Watt): 200.0
Power RMS: 100 W
Made in: China
Frequency Range: 70 Hz - 6 kHz
Тype: PA
Impedance: 8 Ohm
Power: 200 W
Weight: 2,3 kg
Sensitivity: 94 dB…

Balanced and versatile. The Celestion TF1225 is a 12 low frequency driver with a nominal impedance of 8 Ohms and a 250W RMS power rating. With the ability to reproduce bass and mids with exceptional clarity and definition the TF1225 is an ideal choice for any loudspeaker system design. This powerful driver boasts a frequency range of 50Hz to 4kHz delivering articulate sound with tremendous impact. The pressed steel chassis and kevlar-loaded paper cone ensure your driver is well-protected and reliable whilst simultaneously delivering excellent acoustic performance. With four mounting slots the Celestion TF1225 is easy to install in cut-outs measuring 11.14. Take advantage of Celestions legendary …

Class-leading bass reproduction. The Celestion TF1830 is an 18 low frequency driver with a nominal impedance of 4 Ohms and a 500W RMS power rating. Perfect for subwoofer driver replacements upgrades or building your own custom cab the TF1830 boasts a frequency range of 35Hz all the way up to 1000Hz. Balanced Airflow Venting provides enhanced cooling for the TF1830. The drivers cone is crafted from glass-loaded paper with weather-resistant impregnation. Combined with a pressed steel chassis your TF1830 is designed to remain protected and reliable whilst delivering outstanding acoustic performance. With eight mounting slots the Celestion TF1830 is easy to install in cut-outs measuring 16.57.…